TORQUE SENSOR
applied in a rotating system.
LOAD CELL
- 6kg–30kg
- High accuracy
- Good environmental resistance equivalent to IP67.
-
50kg–200kg
- Ultrahigh accuracy, Non Linearity: 0.0110%R.C.
- Particularly good environmental resistance
- 10kg–1ton
- Particularly good environmental resistance
- 220kg–4.4ton
- Ultrahigh accuracy
- Made of stainless steel
- Particularly good environmental resistance
- Hermetic seal
-
1t–470ton
- Particularly good environmental resistance
- Ultrahigh accuracy
- High capacity
- Made of stainless steel
-
5t
- Low cost type
- Good environmental resistance
- Easy installation with mounting by bolts screws.
-
5kN–100kN
- Good environmental resistance
- Abundant variations available
- Suitable for crane & hoist, steel and paper
- Made to order
- Consult with us about the supported rated capacities
- Flex-resistant cable (standard)
- Custom-made to different mounting dimensions available.
- No minimum order quantity.
- 10kN–200kN
- Compact and low-profile
- Robot cable (5 m, standard)
-
20kN–50kN
- Miniature design
- Robot cable (5 m, standard)
- 20kN–2MN
- Compact center-hole type that can be installed anywhere.
-
1kN–50kN
- Lateral force on surface 40 to 100% by the lateral force correction mechanism.
- Double-sided flange
- Low-profile design
- 10kN–50kN
- Compact and flat type easy to be attached to shafts or cylinders.
-
5kN–100kN
- Compact and flat type easy to be attached to shafts or cylinders.
- Low cost type
-
2kN–50kN
- Double-sealed cable connection for improved water resistance.
- Suitable to tension control for paper, etc.
-
500N–20kN
- Heat-resistant as high as 150°C
- Miniature design
- 500kN–1MN
- High capacity
- High accuracy
- 200kN
- High capacity
- Robot cable (5 m, standard)
-
50kN–200kN
- High accuracy
- Robot cable (5 m, standard)
- 6kg–30kg
- High accuracy
- Good environmental resistance equivalent to IP67.
-
50kg–200kg
- Ultrahigh accuracy, Non Linearity: 0.0110%R.C.
- Particularly good environmental resistance
- 10kg–1ton
- Particularly good environmental resistance
- 220kg–4.4ton
- Ultrahigh accuracy
- Made of stainless steel
- Particularly good environmental resistance
- Hermetic seal
-
1t–470ton
- Particularly good environmental resistance
- Ultrahigh accuracy
- High capacity
- Made of stainless steel
-
5t
- Low cost type
- Good environmental resistance
- Easy installation with mounting by bolts screws.
-
5kN–100kN
- Good environmental resistance
- Abundant variations available
- Suitable for crane & hoist, steel and paper
- Made to order
- Consult with us about the supported rated capacities
- Flex-resistant cable (standard)
- Custom-made to different mounting dimensions available.
- No minimum order quantity.
- 10kN–200kN
- Compact and low-profile
- Robot cable (5 m, standard)
-
20kN–50kN
- Miniature design
- Robot cable (5 m, standard)
- 20kN–2MN
- Compact center-hole type that can be installed anywhere.
-
1kN–50kN
- Lateral force on surface 40 to 100% by the lateral force correction mechanism.
- Double-sided flange
- Low-profile design
- 10kN–50kN
- Compact and flat type easy to be attached to shafts or cylinders.
-
5kN–100kN
- Compact and flat type easy to be attached to shafts or cylinders.
- Low cost type
-
2kN–50kN
- Double-sealed cable connection for improved water resistance.
- Suitable to tension control for paper, etc.
-
500N–20kN
- Heat-resistant as high as 150°C
- Miniature design
- 500kN–1MN
- High capacity
- High accuracy
- 200kN
- High capacity
- Robot cable (5 m, standard)
-
50kN–200kN
- High accuracy
- Robot cable (5 m, standard)
- 6-Digit LED Display (±199999)
- Input: up to 40mV/V
- 20-bit A/D Converter
- Environmental Protection: IP65 (when installed)
- 10Vdc Load Cell Excitation @ 120mA max. Powers up to 4x 350Ω Load Cells
- Options: Alarm Relays, Analogue & Digital Outputs
- Customisation Of Software
- New Single Layer Menu for Easier Setup
- Compatible With Existing INT2 Series
- Improved Accuracy – 10 Point Linearisation
- Modular Construction Saves You Money
- Superior Resolution Guaranteed – 20-bit A/D Converter
- Dust Tight & Low-Pressure Water Jet Protection
- Waterproof Front Panel Cover Optional
- Perfect Replacement for Druck DPI 280 & 281 Indicators & INT2 Series
- Capacities: 0-1te to 0-100te
- TRX Handheld Digital Indicator
- Environmental Protection: IP65
- Carrying Case & 15m Cable Included
- Optional Shackles
- Fast & Simple Installation using Bow or D Shackles
- Tough Marine and Underwater Submersible Versions Available
- Water & Moisture Protection as Standard – For use in Most Industrial Environments
- Optimise Signal Integrity and Reduce Noise – With our Integrated Signal Conditioning Options
1. Digital interface: RS232/RS422/RS485
2. Output – Analog, 12-bit: +5VDC/+10VDC
1. Maximum error: 0.01%FS
2. Signal input range: ±2.0mV/V
3. Data communication (RS232/RS485)
4. Three communication output formats; unit conversion: load units are N, kg, lb; torque units are Nm, lb.ft, lb.in.
Suitable for +5 VDC, +10 VDC, 0-20 mA and 4-20 mA inputs
Sampling rate: 120 readings per second
Nonlinearity < +0.01%
- LP7510E
- LOCOSC
- LP7510E
Model Number: LP7519
material:stainless steel
Brand Name:LOCOSC
Model Number: LP7561
Type:Weighing indicator
Power Supply: AC 110V/220V (AC±10%)
Display Type: LCD Rated
Load: 100000kg
Accuracy:1kg, 3000e
Item Name:Stainless Steel Axle Indicator LP7
Housing:Stainless Steel
Display:6 digits 20mm LED or LCD Input
Sensitivity:0.5μV/D Zero tracking:0.5 d/s
Excitation:5VDC
Operating Temperature:-10~+40 ℃ (14℉~104℉) input voltage:-30~30mV
Dimension:330mm x 187mm x 75mm
AWD21E Load Cell Weight Sensor RS232 RS485 Output controller matching debugging software.
| Model | AWD21E |
|---|---|
| Comprehensive Precision | ≤0.002%F.S |
| Supply Voltage | 24VDC |
| Display | Single-row 5-digit LED highlighting (0.56 inch) |
| Output Rate | ≤1280 times/second |
| Operation Temperature | -30-60℃ |
AWD21B Digital Weighing Controller Indicator is suitable for automatic control of various industries, such as ground measure, cement, food packaging, chemical ingredients, etc., special control can be customized.
| Power supply | 110/220v AC |
|---|---|
| Aux. power | 5V/80mA(1~ 4 load cell) |
| Output control | Relay: AC 250V/5A, Resistance load: SSR 24V/30mA |
| Analog output | 4-20mA / 0-10V |
| Signal input | Load cell/4-20mA/0-10V signal etc. |
| Accuracy | 0.2%F.S±2 digits |
| Insulation resistance | ≥100MΩ(DC 500V between terminal and out-shell) |
Amowell AWD21A Load Cell Weight Sensor 4~20mA RS232 RS485 Output LED Indicator with 0.05%F.S Precision IP65 Protection
| Supply Voltage | 9V-30VDC |
|---|---|
| Comprehensive Precision | ≤0.05%F.S |
| Display | Single-row 5-digit LED highlighting (0.56 inch) |
| Power Consumption | ＜5W |
| Sensor Excitation Voltage | 5VDC±2%,100mA (up to 6 350Ω sensors can be connected) |
| Input Sensitivity | .4-6mV/V |
| Output Rate | 10, 40, 640, 1280 times/second |
| Operation Temperature | -30-60℃ |
| On-off Output | 2 way, 250VAC/3A |
| Accuracy | 1/10000 |
- Display mode: 6-digit LED display (-199999~999999)
- Measurement and control speed: 15,80 times/second
- Measurement accuracy Input signal: 0.05 level
- Alarm output: Optional function: 2-point/4-point relay output
- Display mode: 4-digit LED display (-1999~9999)
- Measurement and control speed: 5 times/second
- Measurement accuracy: 0.5 level
- Input signal: Thermal resistor, thermocouple Current signal, voltage signal
Feature
- Multiple working modes available
- High stability
- Bidirectional isolation serial port function, with RS232/RS485, easy to communication with the Host
- Weight calibration, sensitivity calibration, Intelligence calibration
Feature
- Multiple working modes available
- High stability
- Bidirectional isolation serial port function, with RS232/RS485, easy to communication with the Host
- Calibration function without weights
Feature
- Built-in multi-stage amplification chip, independent power supply for sensor.
- Multiple sensitivity input, and switchable.
- High speed, high transmission speed, and high dynamic response frequency.
- Good long-term stability, good anti-interference performance.
Feature
- Built-in multi-stage amplification chip, independent power supply for sensor.
- Multiple sensitivity input, and switchable.
- High speed, high transmission speed, and high dynamic response frequency.
- Good long-term stability, good anti-interference performance.
The Model LC digital force indicator is a highly portable force measurement device. With its 9 V battery supply and compact size the indicator can easily be carried to remote locations to perform force measurement calibrations. The unit can measure compression forces up to 50,000 lbs.
The peak capture feature allows the highest force reading taken to be displayed with the push of a button. The remote location of the load sensor minimizes the chance of damage to the electronic body of the gauge. The stainless steel construction of the sensor and the indicator makes them often resistant to the occasional mishandling than can occur in the field. Optional handles are available for the load cell and gauge.
Each unit has a membrane face with raised buttons and tactile feedback for setup and operation. The high, low, and clear buttons are easily accessible on this front membrane. Zero adjustment and zero offset/tare functions are standard on each unit. Calibration and setup parameters are stored on a memory chip to protect from loss even when power is interrupted. Unauthorized set ups and calibrations are also blocked with internal security. Various combinations of the front panel buttons can be de-activated.
Profinet, EtherNet/IP, Profibus DP 또는 Modbus-TCP 시리얼 포트와 PanelX 소프트웨어를 갖춘 DIN 레일용 계량 기술의 정점!
고성능 WTX120 계량 터미널은 귀하의 측정 체인을 최대한 활용하여 계량 기술의 우수성을 실현합니다!
Measuring range: 5000 Nm
Accuracy: 0.1%
Measuring range: 500Nm
Accuracy: 0.1%
Measuring range: 5000 Nm
Accuracy: 0.1%
Measuring range: 500Nm
Accuracy: 0.1%
Measuring range: 500Nm
Accuracy: 0.3%
Measuring range: 20000Nm
Accuracy: 0.1%
Measuring range: 20000Nm
Accuracy: 0.1%
Measuring range: 5000 Nm
Accuracy: 0.1%
Measuring range: 20Nm
Accuracy: 0.1%
Measuring range: 20Nm
Accuracy: 0.1%
Measuring range: 20000Nm
Accuracy: 0.1%
Measuring range: 20Nm
Accuracy: 0.1%
Measuring range: 20Nm
Accuracy: 0.1%
Measuring range: 200Nm
Accuracy: 0.25%
Measuring range: 5000 Nm
Accuracy: 0.25%
Measuring range: 5000 Nm
Accuracy: 0.25%
Measuring range: 20Nm
Accuracy: 0.25%
Measuring range: 1000 Nm
Accuracy: 0.1%
Measuring range: 1000 Nm
Accuracy: 0.1%
Measuring range: 5000 Nm
Accuracy: 0.1%
Measuring range: 90°~43200°
Nonlinearity: 0.05%FS
Measuring range: 0.5~400mm
Resolution: 0.02um
Maximum speed: 9000 rpm
Protection rating: IP67
Measuring range: 10~400mm
Accuracy: 0.1%FS
WPS draw rope displacement sensor, measuring range 100mm-30000mm, there are S type (small, 100-2500mm), M type (medium, 500-7500mm), L type (large, 7000-15000mm), XXS type (mini, 100-600mm) ), XS type (miniature, 100-1000mm), XL type (super large, 15000-30000mm). Sensor output signals are: resistance output(5K or 10K), voltage output (0-5V, 0-10V, three-wire system or four-wire system), current output (4-20mA, two-wire system, three-wire system or four-wire system; 0-20mA, two-wire system, three-wire system System or four-wire system), pulse output (AB phase or ABZ phase pulse square wave, differential signal output), RS485 digital signal output or absolute value encoding output.
BRG-XXS Small string potentiometer, small size, high precision, compact structure, waterproof and dustproof. An external signal transmission module can be connected to output standard analog signal 0-10V, 4-20mA or digital signal, which is convenient for long-distance transmission or system acquisition.
Brg-15 Micro Displacement Sensor For Fast Measurements Cooperative Partner BRG-15 micro displacement sensor, maximum measuring stroke 400mm, measuring wheel circumference 40mm; mainly designed for narrow measuring space, is the smallest and most stable classic product in China. This sensor has…
Brg-15 Micro Displacement Sensor For Fast Measurements Cooperative Partner BRG-15 micro displacement sensor, maximum measuring stroke 400mm, measuring wheel circumference 40mm; mainly designed for narrow measuring space, is the smallest and most stable classic product in China. This sensor has…
WPS-XS Draw Wire Encoder WPS series XS type miniature rope displacement sensor, measuring range 100mm—1200mm, sensor signal output, can be built-in transmitter module to output 0-5V, 0-10V voltage signal or 4-20mA two-wire current signal, also can be configured externally Transmitting module,…
BGR-601 Helical Structure Draw Wire Sensor Encoder Product Introduction The maximum measuring stroke of the S601 series wire-drawn displacement sensor is 2000mm. It is a high-end brand product launched by us. This product adopts large-diameter multi-strand steel wire rope and independent…
BRG-80 High Quality Draw Wire Linear Position Sensor Product Introduction The maximum measuring stroke of the BRG-80 series analog output wire-drawn displacement sensor is 4000mm, and the circumference of the measuring wheel is 250mm. It is our classic wire-drawn displacement sensor. This sensor…
BRG-60 Explosion-proof Series Cable Displacement Sensor Product Introduction BRG-120FB series wire displacement sensor (hereinafter referred to as sensor) is mainly used to measure the displacement of wire through pulse signal in DC24V line in explosive gas environment of Class IIA, IIB, IIC,…
BRG-25 Wire Encoder Replace SICK Product Introduction BRG-25 series wire-drawn displacement sensor has a maximum measuring stroke of 3200mm, a measuring wheel circumference of 230mm, and a wire rope diameter of 0.8mm. It is a new product designed to meet the special needs of size in some narrow…
BRG-27 Thin Draw Wire Displacement Sensor Replace SICK Product Introduction The maximum measuring stroke can reach 6000mm, the circumference of the measuring wheel is 385mm, and the wire rope diameter reaches 0.8mm. It is a new product designed to meet the special needs of size in some narrow…
BRG60 Underwater Pull-rope Displacement Sensor Product Description The maximum measuring stroke of BRG60-WL underwater series rope displacement sensor is 0-3000mm. It is a newly designed and upgraded underwater rope displacement sensor developed by us. Based on the market test of our products…
BRG-WXY30/60/80/90 Water Proof Draw Wire Sensor IP67 Product Introduction The waterproof pull-wire displacement sensor is designed for use in liquid environments, and is particularly suitable for outdoor use. For example, gate opening measurement, engineering mechanical arms, cylinder extension,…
WPS string potentiometer displacement sensor WPS draw rope displacement sensor, measuring range 100mm-30000mm, there are S type (small, 100-2500mm), M type (medium, 500-7500mm), L type (large, 7000-15000mm), XXS type (mini, 100-600mm) ), XS type (miniature, 100-1000mm), XL type (super large,…
WEP130 rope displacement sensor is a high-precision rope displacement sensor. The output signals of the sensor are: resistance Output, voltage output (0-5V; 0-10V), current output (4-20mA, two-wire or three-wire). (5-12 meters range)
BRG-A pull rope displacement sensor, range 500mm, .,1200mm, military grade, Sensor output signal types are: resistance output, voltage output (0-SV; 0-10V), current output (4- 20mA, two-wire or three-wire) .
BRG-XS Linear String Potentiometer Description The resistance output type of the rope displacement sensor is commonly used for 5V, 10V power supply, and outputs 0-5V, 0-10V voltage signals; voltage Output type and current output type are commonly used for 15-24V power supply, 12V power supply…
Feature
- Built-in multi-stage amplification chip, independent power supply for sensor.
- Multiple sensitivity input, and switchable.
- High speed, high transmission speed, and high dynamic response frequency.
- Good long-term stability, good anti-interference performance.
- Multipoint calibration function.
- Auto/ manual calibration two modes.
Feature
- Built-in multi-stage amplification chip, independent power supply for sensor
- Multiple sensitivity input, and switchable.
- High speed, high transmission speed, and high dynamic response frequency.
- Good long-term stability, good anti-interference performance.
Py500H 지능형 디지털 압력계는 저희 회사가 새로 개발한 신제품으로, 여러 가지 국제적인 선진 전자 기술, 단일 칩 컴퓨터 기술, 전기 삭제 기술, 간섭 방지 기술 등을 통합하여 계측기가 높은 측정 및 제어 정밀도와 강력한 간섭 방지 성능의 장점을 갖추도록 했습니다.
Py500H 지능형 디지털 압력계는 저희 회사가 새로 개발한 신제품으로, 여러 가지 국제적인 선진 전자 기술, 단일 칩 컴퓨터 기술, 전기 삭제 기술, 간섭 방지 기술 등을 통합하여 계측기가 높은 측정 및 제어 정밀도와 강력한 간섭 방지 성능의 장점을 갖추도록 했습니다.
Py500S 지능형 디지털 압력계는 저희 회사에서 새롭게 개발한 신제품으로, 여러 가지 국제적인 선진 전자 기술, 단일칩 컴퓨터 기술, 전기 삭제 기술, 간섭 방지 기술 등을 통합하여 계측기가 높은 측정 및 제어 정밀도와 강력한 간섭 방지 성능의 장점을 갖추도록 했습니다.
이 제품은 유압, 석유, 플라스틱, 고무, 인쇄 및 염색, 섬유 및 기타 산업에서 압력 표시 및 자동 제어에 널리 사용되며 다른 제조업체의 압력 센서와도 함께 사용할 수 있습니다. LED 경보 표시, 릴레이 접점 출력 제어 외부 액추에이터와 함께 상한 및 하한 값 경보를 설정할 수 있습니다. 사용자가 선택할 수 있는 고정밀 전압 출력 모듈, 전류 출력 모듈, 릴레이 출력 제어 모듈 및 통신 모듈이 있습니다. 이 기계는 간단하고 배우기 쉬운 인간화된 작동 방법을 채택했습니다.
이 제품은 유압, 석유, 플라스틱, 고무, 인쇄 및 염색, 섬유 및 기타 산업에서 압력 표시 및 자동 제어에 널리 사용되며 다른 제조업체의 압력 센서와도 함께 사용할 수 있습니다. LED 경보 표시, 릴레이 접점 출력 제어 외부 액추에이터와 함께 상한 및 하한 값 경보를 설정할 수 있습니다. 사용자가 선택할 수 있는 고정밀 전압 출력 모듈, 전류 출력 모듈, 릴레이 출력 제어 모듈 및 통신 모듈이 있습니다. 이 기계는 간단하고 배우기 쉬운 인간화된 작동 방법을 채택했습니다.
이 제품은 유압, 석유, 플라스틱, 고무, 인쇄 및 염색, 섬유 및 기타 산업에서 압력 표시 및 자동 제어에 널리 사용되며 다른 제조업체의 압력 센서와도 함께 사용할 수 있습니다. LED 경보 표시, 릴레이 접점 출력 제어 외부 액추에이터와 함께 상한 및 하한 값 경보를 설정할 수 있습니다. 사용자가 선택할 수 있는 고정밀 전압 출력 모듈, 전류 출력 모듈, 릴레이 출력 제어 모듈 및 통신 모듈이 있습니다. 이 기계는 간단하고 배우기 쉬운 인간화된 작동 방법을 채택했습니다.
Py9000형 PID 지능형 압력 제어 계측기는 당사가 개발한 최신 제품으로, 세계의 많은 첨단 전자 기술, 단일 칩 컴퓨터 기술, 간섭 방지 기술 등을 통합하여 계측기 오일 측정 및 제어의 고정밀성과 강력한 간섭 방지 성능의 장점을 보장합니다.
TP series semiconductor strain gauges are produced by international current technology, and their performance indexes are superior to domestic similar products. It has a large gauge factor, small mechanical hysteresis, wide resistance range, and a small transverse effect.
This semiconductor type strain gauge is mainly used for measurement of stress distribution, linear compensation of various force measurement sensors, and force-electric conversion components as sensors, widely used in static and dynamic stress measurement of mechanical, architectural, aerospace, medical, railway, and bridge engineering. This product has been declared a patent for invention. We also provide semiconductor strain gauges without base.
1. manganese steel
2. Suitable for electronic balances, kitchen scales and other small weighing devices.
The GB strain gauge is a strain gauge designed with two strain gauges. Unlike the FB strain gauge series, the GB strain gauges are parallel and are oriented parallel axis set a certain distance apart. Options are available for three or four terminal output.
The GB strain gauge is a strain gauge designed with two strain gauges. Unlike the FB strain gauge series, the GB strain gauges are parallel and are oriented parallel axis set a certain distance apart. Options are available for three or four terminal output.
The GB strain gauge is a strain gauge designed with two strain gauges. Unlike the FB strain gauge series, the GB strain gauges are parallel and are oriented parallel axis set a certain distance apart. Options are available for three or four terminal output.
The FG strain gauge is a strain gauge designed with four individual strain gauges arranged in Wheatstone bridge configuration.
The FB strain gauge is a strain gauge designed with two strain gauges. Unlike the BB strain gauge series, the FB strain gauges are parallel and are oriented in the same axis. Options are available for three or four terminal output.
The EB strain gauge is a special strain gauge that incorporates 4 individual strain gauges oriented 90° apart and configured in a full bridge configuration. The full bridge configuration means the strain gauges are pre-wired internally so no additional connections are required. Only 4 terminals are available: 2 for input and 2 for output making it easy to install. Wiring options are available to accommodate different applications.
The CA strain gauge is a strain gauge designed with 3 linear strain gauges. Unlike BB strain gauges, CA strain gauges are oriented in 45° to help simplify installation in special applications.
The BB strain gauge is a strain gauge designed with two strain gauges. The two strain gauges are oriented 90 degrees apart (or in a TEE configuration) and are designed to work in tandem in Half-Bridge configuration. Multiple configurations are available to address different mounting configurations with three or four terminal outputs.
The AB strain gauge is designed for Torsion and Shear applications. This type is in 1/4 Bridge configuration must be paired with other strain gauges for Shear and Torsional strain measurements.
The AA strain gauge is a strain gauge designed with for linear strain measurement. Its grid pattern is simple yet versatile and can be made to different lengths to best suit the application
- Inputs: Single-ended IO, pulse or quadrature encoder signal (Low voltage: -30 to +0.6V; High voltage: +4V to 30V)
- Compatible Sensor: Accept photoelectric switch, proximity switch, hall sensor, angular and linear encoder input
- Excitation output: 5V and 24V(30mA), 30mA DC current
- User-defined linearizing parameters to display real physical quantities with A,B,C three parameters and decimal point
- Current counter, alarm value, and other parameters can be saved in non-volatile memory
- Multiple relay output modes for different control need
- Resolution: 4096 bits (12 bits)
- Independent linearity: 0.3%
- Electrical angle: 360°
- Load resistance: > 10 KΩ
- Mass: 60g
- Shaft: stainless steel
- Product name: Absolute value digital encoder
- WDH35 series
- Can be customized on request
- Resistance value: 1K, 2K, 3K, 5K
- Independent linearity: 1%, 0.5%, 0.3%, 0.2%, 0.1%
- Electrical angle: 345° ±2°
- Temperature coefficient: 400ppm/°C
- Smoothness: ± 0.10%
- Shaft: stainless steel
- Conductive Plastic Angle Sensor WDD35 Series
- Can be customized on request
- Resolution: 0.3515°, 0.0878°, 0.0219°
- Absolute value digits: 10, 12, 14 digits
- Shell diameter: 18mm
- Shaft allowable load: radial 10N, axial 5N
- Shock resistance: 100g (6mS)
- Material: aluminum alloy, anodized
- Hall Absolute Rotary Encoder HAE18 Series
- Can be customized on request
- Resolution: 0.3515°, 0.0878°, 0.0219°
- Absolute value digits: 10 (1024), 12 (4096), 14 (16384)
- Shaft allowable load: radial 20N, axial 20N
- Shock resistance: 100g (6mS)
- Shell diameter: 28mm
- Material: aluminum alloy, anodized
- Product Name: Hall Absolute Rotary Encoder HAE28 Series
- Can be customized on request
- Resolution: 0.3515°, 0.0878°, 0.0219°
- Absolute value digits: 10, 12, 14 digits
- Shell diameter: 38mm
- Shaft allowable load: radial 30N, axial 30N
- Shock resistance: 100g (6mS)
- Material: aluminum alloy, anodized
- Product Name: Hall Absolute Rotary Encoder HAE38 Series
- Can be customized on request
- Accuracy: ± 0.1 %
- Load capacity: > 4.7 K Ω
- Housing diameter: 18mm
- Shaft allowable load: radial 10 N, axial 5 N
- Shock resistance: 100 g (6 m S)
- Material: aluminum alloy, anodized
- Product name: Hall analog output type rotary encoder H A N 1 8 series
- Can be customized on request
- Accuracy: ± 0.1 %
- Load capacity: > 4.7 K Ω
- Housing diameter: 28mm
- Shaft allowable load: radial 20 N, axial 20 N
- Shock resistance: 100g (6 m S)
- Material: aluminum alloy, anodized
- Product name: Hall analog output type rotary encoder H A N 2 8 series
- Can be customized on request
- Resolution: 3 2-1 0 2 4 P/R
- Housing Diameter: 18mm
- Shaft allowable load: radial 10 N, axial 10 N
- Shock resistance: 100 g (6 m S)
- Material: aluminum alloy, anodized
- Name: Hall Incremental Rotary Encoder HP E 1 8 Series
- Can be customized on request
- Resolution: 3 2 -1 0 2 4 P/R
- Shell diameter: 28mm
- Shaft allowable load: radial 20N, axial 20N
- Shock resistance: 100 g (6 m S)
- Material: aluminum alloy, anodized
- Product Name: Hall Incremental Rotary Encoder HP E 2 8 Series
- Can be customized on request
- Resolution: 3 2 – 1 0 2 4 P/R
- Shell diameter: 38mm
- Shaft allowable load: radial 30 N, axial 30 N
- Shock resistance: 100 g (6 m S)
- Material: aluminum alloy, anodized
- Product Name: Hall Incremental Rotary Encoder HP E 3 8 Series
- Can be customized on request
- Resolution: 360°/4096 (12 bits) ≈ 0.088°
- Working voltage: 5V±10%
- Working current: <16mA
- Protection class: IP 40
- Mechanical life: > 10 million revolutions
- Mass: about 20 grams
- Product name: Miniature non-contact angle sensor P3015 series
- Can be customized on request
- Resolution: 3 6 0 °/4 0 9 6 (1 2 bits) ≈ 0.088 °
- Operating voltage: 5 V ± 10 %
- Operating current: < 16 mA
- Protection class: IP 40
- Mechanical life: > 500,000 revolutions
- Mass : about 20 grams
- Product name: Miniature non-contact angle sensor P3020 series
- Can be customized on request
- Resolution: 360°/4096 (12 bits) ≈ 0.088°
- Working voltage: 5V±10%
- Working current: <13.5mA
- Protection class: IP40
- Mechanical life: > 50 million revolutions
- Mass: about 25 grams
- Product name: Miniature non-contact angle sensor P3022 series
- Can be customized on request
- Resolution: 360°/4096 (12 bits) ≈ 0.088°
- Working voltage: 5V±10%, 15-30Vdc, 12-30VDC
- Output signal: 0~5V (ratio), 0-10VDC, 4-20mA
- Operating current: <16mA, <25mA, <35mA
- Protection class: IP54
- Mechanical life: > 50 million revolutions
- Mass : about 60 grams
- Product name: Miniature non-contact angle sensor P3036
- Can be customized on request
- High-precision photoelectric single-turn absolute encoder
- Detection method: photoelectric detection
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Parallel output (pure binary, Gray code or Gray remainder)
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug - Resolution: ≤18 bits, up to 262144 lines (order selection)
- Accuracy: ±0.01°
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67 shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Multi-turn absolute encoder (mechanical gear structure)
- Detection method: magnetoelectric encoder, Hall principle
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Parallel output (pure binary, Gray code or Gray remainder)
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug - Resolution: ≤12 bits, up to 4096 lines (order option)
- Laps: 4096 laps
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67, shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Single-turn absolute encoder
- Detection method: magnetoelectric encoder, Hall principle
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Parallel output (pure binary, Gray code or Gray remainder)
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug - Resolution: ≤12 bits, up to 4096 lines (order option)
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67 shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Multi-turn absolute encoder (mechanical gear set circle counting)
- Detection method: magnetoelectric encoder, Hall principle
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Canbus 2.0B standard frame or extended frame
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug - Resolution: ≤16 bits, up to 65536 lines (order selection)
- Laps: 4096 laps
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67 shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Photoelectric high-precision multi-turn absolute encoder (mechanical gear set circle counting)
- Detection method: photoelectric detection
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Canbus 2.0B standard frame or extended frame
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug - Resolution: ≤18 bits, up to 262144 lines (order selection)
- Accuracy: ±0.01°
- Laps: 4096 laps
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67 shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
Measurement range: -320 °F to 70 °F
Accuracy: ±3%
Measurement range: -320 °F to 70 °F
Accuracy: ±3%
Measurement range: +70 °F~500 °F
Accuracy: ±3%
Measurement range: 0~30K PSI
Accuracy: 0.5%
Measurement range: 0~75K PSI
Accuracy: ±0.1%
Measurement range: 0~75K PSI
Accuracy: ±0.1%
Measurement range: 0~100K PSI
Accuracy: ±0.2%
Measurement range: 30~7.5K PSI
Accuracy: ±0.2%
Measurement range: 30~7.5K PSI
Accuracy: ±0.2%
Measurement range: 1~500 PSI
Accuracy: ±0.05%
Measurement range: 1~500 PSI
Accuracy: ±0.05%
Measurement range: 0~30K PSI
Accuracy: ±0.05%
Measurement range: 0~15K PSI
Accuracy: ±0.1%
Measurement range: 0~20K PSI
Accuracy: ±0.1%
Measurement range: 0~20K PSI
Accuracy: ±0.25%
Measurement range: 0~200 PSI
Accuracy: ±0.05%
Measurement range: 0~200 PSI
Accuracy: ±0.05%
Measurement range: 0~30K PSI
Accuracy: ±0.15%
Measurement range: -40~250 °F
Accuracy: ±0.25%
Measurement range: -40 °F to 250 °F
Accuracy: ±0.1%
PLC110 single-channel digital transmitter, adopts rail installation, small size and light weight. With RS485 communication interface, 4-20mA analog output. Applicable to all resistance strain type weighing sensors.
PLC110 single-channel digital transmitter, adopts rail installation, small size and light weight. With RS485 communication interface, 4-20mA analog output. Applicable to all resistance strain type weighing sensors.
PLC110 single-channel digital transmitter, adopts rail installation, small size and light weight. With RS485 communication interface, 4-20mA analog output. Applicable to all resistance strain type weighing sensors.
DM is a fully digital multi-functional weight transmitter, manufactured by SMT reflow soldering process, which can convert the analog signal of weighing sensor,RS232 or RS485 digital signal into standard analog signal and switch control output,which can be easily connected with PLC and other industrial control equipment,and the two-stage double voltage stabilization electronic filtering of the power supply ensures that it can work normally and stably even under power supply interference in harsh environment.
WV-100 is a waterproof and dustproof weight transmitter developed for industrial sites with harsh operating environments. The transmitter has a high protection level, stable performance, simple operation, and is equipped with RS485, analog (current and voltage), and switch interfaces to meet the needs of industrial sites. It is widely used in concrete mixing, metallurgy, vehicle weighing, converters and chemical industry.
1.SOP094 has a DC voltage of 24 V and a power of less than 3 w.
2.Multi channel input, nine channel acquisition at the same time.
3.With two-way communication RS485 and Rs232
4.The acquisition value can be read, calibrated and cleared with the help of serial port.
5.Self calibration function, when using TEDs sensor of our company, it is free from calibration operation.
The SOP510 transmitter adopts an aluminum profile shell, with original imported high-performance devices used internally to precisely amplify the sensor output signal. Internally, it undergoes voltage stabilization, constant current bridge supply, voltage current conversion, impedance adaptation, linear compensation, humidity compensation, etc. Convert mechanics and quantities into standard current and voltage signals for output, which can switch between 0 ± 5V/0 ± 10V/4-20mA/0-20mA. It can directly interface with automatic control equipment such as PLC, microcontroller, upper computer terminal, or be connected to a computer network. Equipped with standard signal external zero and external gain adjustment functions, input over protection, output short circuit protection, and other characteristics.
Ceramic resistance sensor
Ratio voltage output
Very small size
Over-voltage protected
Reverse voltage protected
Short circuit protected
SCR system for urea pressure sensors
It has functions such as pressure display, wireless transmission, data recording (optional), data retransmission (optional) and supplementary transmission.
Ultra-low power consumption, 5-second sampling interval battery life of 3 years (normal temperature).
Own network protocol with low power consumption and long-distance characteristics, with a line of sight of 1000 meters and 5000 meters (optional).
With the wireless repeater, cellular network expansion can be realized.
Wireless transmission network SWSN (self-organizing network), 2G optional.
Supports multiple wireless transmission modes
24 Bits high precision ADC acquisition
Lithium battery power supply, long standby time
Low power consumption, static current as low as 15uA
OLED display, low temperature resistance
Compact structure, convenient installation on site
Wide measuring range, remote transmission distance
High accuracy
Battery-powered，low consumption
LCD display
Compact
RS485 communication interface or Hart communication protocol
Digital display
Support for networking applications
With digital compensation and nonlinear correction technology
High sensitivity, high precision
No moving parts, reliable in performance
Wide pressure range
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
본 제품은 수입 부품을 사용하였으며, 호스 타입으로 해외 유사 수입 제품과 호환 가능합니다.
KSENSORS
좋은 품질과 합리적인 가격을 제공합니다.
We provide good quality and reasonable prices.
케이센서스는
다양한 제품과 솔루션을 제공하겠습니다.
많이 찾는 제품
- 6kg–30kg
- High accuracy
- Good environmental resistance equivalent to IP67.
-
50kg–200kg
- Ultrahigh accuracy, Non Linearity: 0.0110%R.C.
- Particularly good environmental resistance
Warning: Undefined variable $thumbs in /home/u598362816/domains/ksensors.co.kr/public_html/wp-content/plugins/nasa-core/includes/layouts/products/nasa_products_main/products_main_content.php on line 108
- 10kg–1ton
- Particularly good environmental resistance
- 220kg–4.4ton
- Ultrahigh accuracy
- Made of stainless steel
- Particularly good environmental resistance
- Hermetic seal
정밀한 계측 솔루션을 제공합니다. 산업용 로드셀 및 토크센서 전문 판매업체로 신속한 대응과 신뢰를 바탕으로 고객 만족을 실현합니다.
Top Rate
Quick viewWishlist Added
Quick viewWishlist Added
Quick viewWishlist Added
Quick viewWishlist Added
Best Sellings
Quick viewWishlist Added
Quick viewWishlist Added
Quick viewWishlist Added-
Quick viewWishlist Added
Recent Products
-
Quick viewWishlist Added
Quick viewWishlist Added
Quick viewWishlist Added
Quick viewWishlist Added
