LOAD CELL
TORQUE SENSOR
applied in a rotating system.






50-2000N Stainless Steel S Beam Load Cell FA303 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA303 can be used to measure load 50N,100N,200N,500N,1000N and 2000N capacity, its Weight is 0.2kg and material is Stainless steel, its Rated output range is 2.0±10%mV/V, its Zero Balance range is ±0.05mV/V.
25-500kg 0.75-10t Alloy Steel S Beam Load Cell FA307 is from S Beam Load Cell category of our brand FIBOS FA3-Series, FA307 can be used to measure load ranges from 25kg up to 500kg and ranges from 0.75t up to 10t capacity, its Non-linearity,Hysteresis and Repeatability all ≤0.03%F.S., its Creep(30min) ≤0.024%F.S..
50-5000kg Large Range Weight Measurement Applied S Beam Load Cell FA305 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA305 can be used to measure load 50kg,100kg,200kg,500kg,1000kg, 2000kg,3000kg and 5000kg capacity, its Rated output range is 2.0±0.25%mV/V, its Zero Balance range is ±0.01mV/V.
10-1000N Stainless Steel S Beam Load Cell FA302 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA302 can be used to measure load ranges from 10N,20N,50N,100N,200N,500N up to 1000N capacity, its Cable size is ⌀2x3000mm, its Weight is 0.1kg and Material is Stainless steel, its range of Input impedance and Output impedance are both 650/350±5Ω.
5-200N Stainless Steel S Beam Load Cell FA301 is a model of our brand FIBOS FA3-Series, it belongs to S Beam Load Cell category, FA301 can be used to measure load 5N,10N,20N,50N,100N and 200N capacity, its Creep(30min),Non-linearity,Hysteresis and Repeatability all ≤0.05%F.S., its Cable size is ⌀2x3000mm.
50,100,200,500,1000,2000kg Or Customized S Beam Load Cell FA310 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA310 can be used to measure load 50kg,100kg,200kg,500kg,1000kg and 2000kg or customized capacity, its Creep(30min),Hysteresis and Repeatability all ≤0.025%F.S. or can be customized, and its Non-linearity ≤0.03%F.S. or can also be customized.
100,300,500,1000,3000,5000,10000kg Or Customized S Beam Load Cell FA302C is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302C can be used to measure load ranges from 100kg up to 10000kg or customized capacity, its Weight is 0.75kg or can be customized.
5,10,20,50,100,200,500,1000,2000,5000N Or Customized S Beam Load Cell FA302B is a model of our brand FIBOS FA3-Series, it belongs to FA302 which is in S Beam Load Cell category, FA302B can be used to measure load 5N,10N,20N,50N,100N,200N,500N,1000N,2000N and 5000N or customized capacity, its Weight is 0.1kg or can be customized.
10,20,50,100,200,500,1000N or customized S Beam Load Cell FA302L is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302L can be used to measure load 10N,20N,50N,100N,200N,500N and 1000N or customized capacity, its Cable size is ⌀4x1000mm or customized length.
FA806 static load weighing module is based on the FA473 column load cell, with a range from 10t to 50t. It is characterized by its compact construction, which does not require the installation of additional accessories; the self-stabilizing load cell bearing head allows accurate and repeatable metering; quick and easy installation, saving installation and downtime for maintenance. The static load weighing module can be easily mounted on containers of various shapes and can be easily loaded, dosed, or mixed in this container.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
This weigh module has a rugged and compact design and an accuracy, which makes it especially suitable for load and level monitoring in storage tanks. The sensing element consists of three sections. The two outer sections constitute supports and rest on the built-in block, which is secured to the base. On the middle section, which is the loadsensing part, there is a yoke to which the leg of the tank is secured. The sensor is efficiently locked so that it cannot twist in the built-in block.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
인덴터가 장착된 스테인리스 스틸 컬럼 센서로, 장착 높이는 200입니다.
50kN~3000kN IP67 Alloy Steel Or Stainless Steel Column Type Load Cell Weighing Sensor FA410 is a model of Column Type Load Cell, it is designed to measure load ranges from 50kN up to 3000kN. The material Alloy Steel or Stainless Steel can be customized, its cable size is 5.4x6000mm, it supports IP67.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
50-2000N Stainless Steel S Beam Load Cell FA303 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA303 can be used to measure load 50N,100N,200N,500N,1000N and 2000N capacity, its Weight is 0.2kg and material is Stainless steel, its Rated output range is 2.0±10%mV/V, its Zero Balance range is ±0.05mV/V.
25-500kg 0.75-10t Alloy Steel S Beam Load Cell FA307 is from S Beam Load Cell category of our brand FIBOS FA3-Series, FA307 can be used to measure load ranges from 25kg up to 500kg and ranges from 0.75t up to 10t capacity, its Non-linearity,Hysteresis and Repeatability all ≤0.03%F.S., its Creep(30min) ≤0.024%F.S..
50-5000kg Large Range Weight Measurement Applied S Beam Load Cell FA305 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA305 can be used to measure load 50kg,100kg,200kg,500kg,1000kg, 2000kg,3000kg and 5000kg capacity, its Rated output range is 2.0±0.25%mV/V, its Zero Balance range is ±0.01mV/V.
10-1000N Stainless Steel S Beam Load Cell FA302 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA302 can be used to measure load ranges from 10N,20N,50N,100N,200N,500N up to 1000N capacity, its Cable size is ⌀2x3000mm, its Weight is 0.1kg and Material is Stainless steel, its range of Input impedance and Output impedance are both 650/350±5Ω.
5-200N Stainless Steel S Beam Load Cell FA301 is a model of our brand FIBOS FA3-Series, it belongs to S Beam Load Cell category, FA301 can be used to measure load 5N,10N,20N,50N,100N and 200N capacity, its Creep(30min),Non-linearity,Hysteresis and Repeatability all ≤0.05%F.S., its Cable size is ⌀2x3000mm.
50,100,200,500,1000,2000kg Or Customized S Beam Load Cell FA310 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA310 can be used to measure load 50kg,100kg,200kg,500kg,1000kg and 2000kg or customized capacity, its Creep(30min),Hysteresis and Repeatability all ≤0.025%F.S. or can be customized, and its Non-linearity ≤0.03%F.S. or can also be customized.
100,300,500,1000,3000,5000,10000kg Or Customized S Beam Load Cell FA302C is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302C can be used to measure load ranges from 100kg up to 10000kg or customized capacity, its Weight is 0.75kg or can be customized.
5,10,20,50,100,200,500,1000,2000,5000N Or Customized S Beam Load Cell FA302B is a model of our brand FIBOS FA3-Series, it belongs to FA302 which is in S Beam Load Cell category, FA302B can be used to measure load 5N,10N,20N,50N,100N,200N,500N,1000N,2000N and 5000N or customized capacity, its Weight is 0.1kg or can be customized.
10,20,50,100,200,500,1000N or customized S Beam Load Cell FA302L is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302L can be used to measure load 10N,20N,50N,100N,200N,500N and 1000N or customized capacity, its Cable size is ⌀4x1000mm or customized length.
FA806 static load weighing module is based on the FA473 column load cell, with a range from 10t to 50t. It is characterized by its compact construction, which does not require the installation of additional accessories; the self-stabilizing load cell bearing head allows accurate and repeatable metering; quick and easy installation, saving installation and downtime for maintenance. The static load weighing module can be easily mounted on containers of various shapes and can be easily loaded, dosed, or mixed in this container.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
This weigh module has a rugged and compact design and an accuracy, which makes it especially suitable for load and level monitoring in storage tanks. The sensing element consists of three sections. The two outer sections constitute supports and rest on the built-in block, which is secured to the base. On the middle section, which is the loadsensing part, there is a yoke to which the leg of the tank is secured. The sensor is efficiently locked so that it cannot twist in the built-in block.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
인덴터가 장착된 스테인리스 스틸 컬럼 센서로, 장착 높이는 200입니다.
50kN~3000kN IP67 Alloy Steel Or Stainless Steel Column Type Load Cell Weighing Sensor FA410 is a model of Column Type Load Cell, it is designed to measure load ranges from 50kN up to 3000kN. The material Alloy Steel or Stainless Steel can be customized, its cable size is 5.4x6000mm, it supports IP67.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
Industrial automation, medical, 3C, agriculture and animal husbandry, assembly measurement and various industrial system testing
Industrial automation, medical, 3C, agriculture and animal husbandry, assembly measurement and various industrial system testing
Industrial automation, medical, 3C, agriculture and animal husbandry, assembly measurement and various industrial system testing
Industrial automation, medical, 3C, agriculture and animal husbandry, assembly measurement and various industrial system testing
Industrial automation, medical, 3C, agriculture and animal husbandry, assembly measurement and various industrial system testing
DT85는 캐비닛형 다기능 중량 트랜스미터로, 4채널 독립형 또는 접속 박스를 통한 4채널 비독립형 구성으로 사용할 수 있습니다. 또한, 각 센서의 상태를 진단할 수 있는 기능을 갖추고 있으며, 다양한 인터페이스를 지원하여 모든 자동화 시스템에 유연하게 적용할 수 있습니다.
DT70 스트레인 센서 디지털 전송 컨트롤러는 디스플레이, 전송, 제어 기능을 통합한 다기능 중량 신호 변환 장치로, 직렬 디지털 신호 출력과 아날로그 신호 출력 등 다양한 기능을 갖추고 있습니다. 본 제품은 작고 가벼운 설계를 특징으로 하며, 엄격한 전자기 적합성(EMC) 테스트를 통과하여 안정적인 성능을 보장합니다.
DT70은 인장, 압축, 인장력 측정, 계량형 레벨 측정, 호퍼 저울, 크레인 저울, 인장/압축 시험기 등 다양한 저항 스트레인 방식의 로드셀 어플리케이션에 적합합니다. 동시에 아날로그 계량 센서의 디지털 업그레이드에도 대응할 수 있어, 곡물, 경공업, 금속, 건축 자재, 화학, 비철금속, 에너지, 기계 산업 등 다양한 산업 현장의 공정 계량 및 힘 측정에 널리 사용됩니다.
DT45는 산업 현장에서 중량 전송이 필요한 환경을 위해 개발된 소형 중량 트랜스미터입니다. 본 트랜스미터는 소형으로 설계되어 성능이 안정적이며 조작이 간편합니다. RS485, 아날로그(전류 및 전압), 디지털 인터페이스를 갖추어 산업 현장의 다양한 요구를 충족합니다. 콘크리트 혼합, 야금, 변환기 및 화학 산업, 사료 및 식품 가공 등 여러 분야에서 널리 사용되고 있습니다.
XK315A1X 교류(AC) 및 직류(DC) 겸용 디스플레이 계기는 전자 플랫폼 저울, 바닥 저울 등 다양한 저울에 적용할 수 있습니다.
XK315A1GB-5 스테인리스 스틸 디스플레이 계기는 전자 플랫폼 저울, 바닥 저울 등 다양한 저울에 적용할 수 있습니다.
XK315A1GB-8 중량 계기는 스테인리스 스틸 케이스를 채용하였으며, 적용 분야는 전자 플랫폼 저울, 바닥 저울 등입니다.
XK3190-A6B 중량 계기와 XK3190-A6는 전자 플랫폼 저울, 전자 탁상 저울, 전자 바닥 저울 등 다양한 저울에 적합합니다.
XK3190-A6B 중량 계기는 1개에서 8개의 센서를 사용하는 전자 플랫폼 저울, 전자 바닥 저울, 전자 트럭 저울 등 정지형 계량 시스템에 적합합니다.
XK3190-A23P는 3창 액정 디스플레이(LCD)를 갖춘 가격표시형 중량 계기로, 마이크로 프린터가 내장되어 있습니다. 이 제품은 전자 플랫폼 저울, 전자 탁상 저울, 전자 바닥 저울 등과 같이 1개에서 4개까지의 센서를 사용하는 정지형 계량 시스템에 적합합니다.
XK3190-A12ES 스테인리스 중량 계기는 고정밀 아날로그-디지털 변환 기술과 특수 소프트웨어 기반의 진동 방지 기술을 적용한 XK3190-A12ES 시리즈 제품입니다.
DT39는 중량 전송이 필요한 산업 현장을 위해 개발된 소형 중량 트랜스미터입니다.
본 트랜스미터는 소형 크기, 안정적인 성능, 간편한 조작, RS485 통신 인터페이스를 갖추고 있습니다.
콘크리트 혼합, 야금, 변환기 및 화학, 사료 및 식품 가공 등 다양한 산업 분야에서 널리 사용됩니다.
CWV-200 컬러 스크린 중량 지시계는 다양한 환경에서 중량 표시 용도로 사용할 수 있는 제품입니다. 현재 이 제품은 쓰레기 수거 차량의 중량 표시 및 차량 중량 측정 시스템 등에 실제로 적용되어 사용되고 있습니다.
이 제품은 옥외 트럭 저울에 사용되는 최고급 LED 원격 디스플레이로, 스테인리스 스틸 하우징과 IP65 등급의 방진·방수 성능을 갖춘 내구성 높은 구조를 자랑합니다. 세계 최초의 초경량 LED 디스플레이로, 170도 광시야각과 직사광선에서도 선명한 가시성을 제공합니다. 또한, 주요 계량기 브랜드와 스마트 데이터 인식 시스템을 통해 호환되어 탁월한 유연성을 제공합니다.
For static, non-continuous torque measurement
For static, non-continuous torque measurement
For static, non-continuous torque measurement
Suitable for dynamic, bearing, torque wrench and other testers
Suitable for dynamic, bearing, torque wrench and other testers
Suitable for dynamic, bearing, torque wrench and other testers
Suitable for dynamic, bearing, torque wrench and other testers
Suitable for dynamic, bearing, torque wrench and other testers
Suitable for dynamic, bearing, torque wrench and other testers
동적 토크 센서(Dynamic Torque Sensor)는 회전 동력 장비의 출력 토크 및 출력을 정밀하게 측정할 수 있는 계측 장비입니다.
이 센서는 전동기, 엔진, 내연기관 등 회전형 동력 장비의 토크 및 출력 측정뿐만 아니라, 팬, 워터펌프, 기어박스, 토크 렌치 등 기계 부품의 토크 및 출력 테스트에도 널리 사용됩니다.
정적 토크 센서는 비틀림 토크로 인해 발생하는 변형(strain)을 저항 스트레인 게이지의 원리에 따라 선형적인 전기 신호로 변환하는 계측기입니다.
이 제품은 성숙한 제조 기술, 다양한 모델, 넓은 측정 범위, 고정밀도, 안정적이고 신뢰할 수 있는 성능을 갖추고 있으며,
시험기, 정적 토크 측정 장치 등 다양한 테스트 시스템에 널리 사용됩니다.
동적 토크 센서(Dynamic Torque Sensor)는 회전 동력 장비의 출력 토크 및 출력을 정밀하게 측정할 수 있는 계측 장비입니다.
이 센서는 전동기, 엔진, 내연기관 등 회전형 동력 장비의 토크 및 출력 측정뿐만 아니라, 팬, 워터펌프, 기어박스, 토크 렌치 등 기계 부품의 토크 및 출력 테스트에도 널리 사용됩니다.
동적 토크 센서(Dynamic Torque Sensor)는 회전 동력 장비의 출력 토크 및 출력을 정밀하게 측정할 수 있는 계측 장비입니다.
이 센서는 전동기, 엔진, 내연기관 등 회전형 동력 장비의 토크 및 출력 측정뿐만 아니라, 팬, 워터펌프, 기어박스, 토크 렌치 등 기계 부품의 토크 및 출력 테스트에도 널리 사용됩니다.
이 제품은 다양한 렌치와 결합해 정지 및 회전 토크를 ±0.5% 정확도로 측정하고, 실시간 디스플레이 및 무선 데이터 전송 기능을 제공하여 자동 제어 및 모니터링에 적합합니다.
이 제품은 비회전 토크(정적 토크) 측정을 위한 센서로, 신뢰성 높은 신호 안정성과 견고한 내구성을 갖추고 있으며, 다양한 산업용 테스트 장비 및 시스템에 폭넓게 사용됩니다.
이 센서는 비회전 또는 느린 회전 상태에서 토크 측정이 가능하며, 전동 공구 테스트에 적합하고 다양한 산업용 비회전 토크 측정 시스템에 폭넓게 활용됩니다.
이 센서는 고품질 합금강으로 제작되었으며, 정적 상태에서의 비회전 토크 측정에 적합합니다. 방해 신호에 강하고 신호 안정성이 뛰어나며, 다양한 산업용 테스트 장비에 폭넓게 사용됩니다.
본 제품은 정적 비연속 회전 환경에서 정밀한 비회전 토크를 측정할 수 있으며, 강한 내장해성과 안정된 신호 출력, 고급 합금강 구조 및 광범위한 산업용 응용이 특징입니다. 비표준 사양도 대응 가능합니다
이 제품은 정확하고 안정적인 비회전 토크 측정을 위한 센서로, 간헐적 회전 환경에서도 사용할 수 있으며, 맞춤형 제작과 신호 안정성, 내구성이 뛰어나 다양한 산업 장비 및 토크 테스트 환경에 적합합니다.
이 센서는 고정 상태의 토크 측정에 적합하며, 비표준 사양 제작과 강한 내환경성 및 간섭 방지 성능을 갖춰 다양한 산업용 장비의 정적 토크 측정에 폭넓게 활용됩니다.
50-2000N Stainless Steel S Beam Load Cell FA303 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA303 can be used to measure load 50N,100N,200N,500N,1000N and 2000N capacity, its Weight is 0.2kg and material is Stainless steel, its Rated output range is 2.0±10%mV/V, its Zero Balance range is ±0.05mV/V.
25-500kg 0.75-10t Alloy Steel S Beam Load Cell FA307 is from S Beam Load Cell category of our brand FIBOS FA3-Series, FA307 can be used to measure load ranges from 25kg up to 500kg and ranges from 0.75t up to 10t capacity, its Non-linearity,Hysteresis and Repeatability all ≤0.03%F.S., its Creep(30min) ≤0.024%F.S..
50-5000kg Large Range Weight Measurement Applied S Beam Load Cell FA305 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA305 can be used to measure load 50kg,100kg,200kg,500kg,1000kg, 2000kg,3000kg and 5000kg capacity, its Rated output range is 2.0±0.25%mV/V, its Zero Balance range is ±0.01mV/V.
10-1000N Stainless Steel S Beam Load Cell FA302 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA302 can be used to measure load ranges from 10N,20N,50N,100N,200N,500N up to 1000N capacity, its Cable size is ⌀2x3000mm, its Weight is 0.1kg and Material is Stainless steel, its range of Input impedance and Output impedance are both 650/350±5Ω.
5-200N Stainless Steel S Beam Load Cell FA301 is a model of our brand FIBOS FA3-Series, it belongs to S Beam Load Cell category, FA301 can be used to measure load 5N,10N,20N,50N,100N and 200N capacity, its Creep(30min),Non-linearity,Hysteresis and Repeatability all ≤0.05%F.S., its Cable size is ⌀2x3000mm.
50,100,200,500,1000,2000kg Or Customized S Beam Load Cell FA310 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA310 can be used to measure load 50kg,100kg,200kg,500kg,1000kg and 2000kg or customized capacity, its Creep(30min),Hysteresis and Repeatability all ≤0.025%F.S. or can be customized, and its Non-linearity ≤0.03%F.S. or can also be customized.
100,300,500,1000,3000,5000,10000kg Or Customized S Beam Load Cell FA302C is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302C can be used to measure load ranges from 100kg up to 10000kg or customized capacity, its Weight is 0.75kg or can be customized.
5,10,20,50,100,200,500,1000,2000,5000N Or Customized S Beam Load Cell FA302B is a model of our brand FIBOS FA3-Series, it belongs to FA302 which is in S Beam Load Cell category, FA302B can be used to measure load 5N,10N,20N,50N,100N,200N,500N,1000N,2000N and 5000N or customized capacity, its Weight is 0.1kg or can be customized.
10,20,50,100,200,500,1000N or customized S Beam Load Cell FA302L is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302L can be used to measure load 10N,20N,50N,100N,200N,500N and 1000N or customized capacity, its Cable size is ⌀4x1000mm or customized length.
FA806 static load weighing module is based on the FA473 column load cell, with a range from 10t to 50t. It is characterized by its compact construction, which does not require the installation of additional accessories; the self-stabilizing load cell bearing head allows accurate and repeatable metering; quick and easy installation, saving installation and downtime for maintenance. The static load weighing module can be easily mounted on containers of various shapes and can be easily loaded, dosed, or mixed in this container.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
This weigh module has a rugged and compact design and an accuracy, which makes it especially suitable for load and level monitoring in storage tanks. The sensing element consists of three sections. The two outer sections constitute supports and rest on the built-in block, which is secured to the base. On the middle section, which is the loadsensing part, there is a yoke to which the leg of the tank is secured. The sensor is efficiently locked so that it cannot twist in the built-in block.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
인덴터가 장착된 스테인리스 스틸 컬럼 센서로, 장착 높이는 200입니다.
50kN~3000kN IP67 Alloy Steel Or Stainless Steel Column Type Load Cell Weighing Sensor FA410 is a model of Column Type Load Cell, it is designed to measure load ranges from 50kN up to 3000kN. The material Alloy Steel or Stainless Steel can be customized, its cable size is 5.4x6000mm, it supports IP67.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
50-2000N Stainless Steel S Beam Load Cell FA303 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA303 can be used to measure load 50N,100N,200N,500N,1000N and 2000N capacity, its Weight is 0.2kg and material is Stainless steel, its Rated output range is 2.0±10%mV/V, its Zero Balance range is ±0.05mV/V.
25-500kg 0.75-10t Alloy Steel S Beam Load Cell FA307 is from S Beam Load Cell category of our brand FIBOS FA3-Series, FA307 can be used to measure load ranges from 25kg up to 500kg and ranges from 0.75t up to 10t capacity, its Non-linearity,Hysteresis and Repeatability all ≤0.03%F.S., its Creep(30min) ≤0.024%F.S..
50-5000kg Large Range Weight Measurement Applied S Beam Load Cell FA305 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA305 can be used to measure load 50kg,100kg,200kg,500kg,1000kg, 2000kg,3000kg and 5000kg capacity, its Rated output range is 2.0±0.25%mV/V, its Zero Balance range is ±0.01mV/V.
10-1000N Stainless Steel S Beam Load Cell FA302 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA302 can be used to measure load ranges from 10N,20N,50N,100N,200N,500N up to 1000N capacity, its Cable size is ⌀2x3000mm, its Weight is 0.1kg and Material is Stainless steel, its range of Input impedance and Output impedance are both 650/350±5Ω.
5-200N Stainless Steel S Beam Load Cell FA301 is a model of our brand FIBOS FA3-Series, it belongs to S Beam Load Cell category, FA301 can be used to measure load 5N,10N,20N,50N,100N and 200N capacity, its Creep(30min),Non-linearity,Hysteresis and Repeatability all ≤0.05%F.S., its Cable size is ⌀2x3000mm.
50,100,200,500,1000,2000kg Or Customized S Beam Load Cell FA310 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA310 can be used to measure load 50kg,100kg,200kg,500kg,1000kg and 2000kg or customized capacity, its Creep(30min),Hysteresis and Repeatability all ≤0.025%F.S. or can be customized, and its Non-linearity ≤0.03%F.S. or can also be customized.
100,300,500,1000,3000,5000,10000kg Or Customized S Beam Load Cell FA302C is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302C can be used to measure load ranges from 100kg up to 10000kg or customized capacity, its Weight is 0.75kg or can be customized.
5,10,20,50,100,200,500,1000,2000,5000N Or Customized S Beam Load Cell FA302B is a model of our brand FIBOS FA3-Series, it belongs to FA302 which is in S Beam Load Cell category, FA302B can be used to measure load 5N,10N,20N,50N,100N,200N,500N,1000N,2000N and 5000N or customized capacity, its Weight is 0.1kg or can be customized.
10,20,50,100,200,500,1000N or customized S Beam Load Cell FA302L is a model belongs to FA302 which is in S Beam Load Cell category of our brand FIBOS FA3-Series, S Beam Load Cell FA302L can be used to measure load 10N,20N,50N,100N,200N,500N and 1000N or customized capacity, its Cable size is ⌀4x1000mm or customized length.
FA806 static load weighing module is based on the FA473 column load cell, with a range from 10t to 50t. It is characterized by its compact construction, which does not require the installation of additional accessories; the self-stabilizing load cell bearing head allows accurate and repeatable metering; quick and easy installation, saving installation and downtime for maintenance. The static load weighing module can be easily mounted on containers of various shapes and can be easily loaded, dosed, or mixed in this container.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
This weigh module has a rugged and compact design and an accuracy, which makes it especially suitable for load and level monitoring in storage tanks. The sensing element consists of three sections. The two outer sections constitute supports and rest on the built-in block, which is secured to the base. On the middle section, which is the loadsensing part, there is a yoke to which the leg of the tank is secured. The sensor is efficiently locked so that it cannot twist in the built-in block.
컬럼 센서 기본 모델은 추가 압력 헤드를 사용할 경우 설치 높이가 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
인덴터가 장착된 스테인리스 스틸 컬럼 센서로, 장착 높이는 200입니다.
50kN~3000kN IP67 Alloy Steel Or Stainless Steel Column Type Load Cell Weighing Sensor FA410 is a model of Column Type Load Cell, it is designed to measure load ranges from 50kN up to 3000kN. The material Alloy Steel or Stainless Steel can be customized, its cable size is 5.4x6000mm, it supports IP67.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
컬럼 센서의 확장형은 110E-JD와 비교하여 셸과 커버의 재질이 스테인리스 스틸로 변경되었으며, 분해를 방지하기 위해 기계적으로 체결됩니다. 추가 인덴터 사용 시 설치 높이는 188 및 214까지 도달할 수 있습니다.
KSENSORS
좋은 품질과 합리적인 가격을 제공합니다.
We provide good quality and reasonable prices.
케이센서스는
다양한 제품과 솔루션을 제공하겠습니다.
많이 찾는 제품
50-2000N Stainless Steel S Beam Load Cell FA303 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA303 can be used to measure load 50N,100N,200N,500N,1000N and 2000N capacity, its Weight is 0.2kg and material is Stainless steel, its Rated output range is 2.0±10%mV/V, its Zero Balance range is ±0.05mV/V.
25-500kg 0.75-10t Alloy Steel S Beam Load Cell FA307 is from S Beam Load Cell category of our brand FIBOS FA3-Series, FA307 can be used to measure load ranges from 25kg up to 500kg and ranges from 0.75t up to 10t capacity, its Non-linearity,Hysteresis and Repeatability all ≤0.03%F.S., its Creep(30min) ≤0.024%F.S..
50-5000kg Large Range Weight Measurement Applied S Beam Load Cell FA305 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA305 can be used to measure load 50kg,100kg,200kg,500kg,1000kg, 2000kg,3000kg and 5000kg capacity, its Rated output range is 2.0±0.25%mV/V, its Zero Balance range is ±0.01mV/V.
10-1000N Stainless Steel S Beam Load Cell FA302 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA302 can be used to measure load ranges from 10N,20N,50N,100N,200N,500N up to 1000N capacity, its Cable size is ⌀2x3000mm, its Weight is 0.1kg and Material is Stainless steel, its range of Input impedance and Output impedance are both 650/350±5Ω.
정밀한 계측 솔루션을 제공합니다. 산업용 로드셀 및 토크센서 전문 판매업체로 신속한 대응과 신뢰를 바탕으로 고객 만족을 실현합니다.
Top Rate
- Quick viewWishlist Added
- Quick viewWishlist Added
- Quick viewWishlist Added
- Quick viewWishlist Added
Best Sellings
- Quick viewWishlist Added
- Quick viewWishlist Added
- Quick viewWishlist Added
- Quick viewWishlist Added
Recent Products
- Quick viewWishlist Added
- Quick viewWishlist Added
- Quick viewWishlist Added
- Quick viewWishlist Added