GPB100D Digital parallel beam load cell
FEATURES
- Aluminum alloy,surface anodized and anticorrosion;
- Built-in digital module, digital signal output, RS485 or RS232; Max platform size: 250×350mm;
- Factory calibration, no calibration required.
- Modify the acceleration of gravity and can be used in other places without calibration;
- To change division value, after that, the corresponding weight can be output, no need for field calibration.
- The sensor has only one zero-setting command and a weight read command are immediately accessed.
- Mainly used in smart shelves, smart gravity cabinets, garbage recycling and others.
PARAMETER
| Rated Load | 3,6,10,20,30,40,50(kg) | ||
|
Division Value |
≤5kg，0.1g |
Weight data output rate |
Rs485：3ms |
| 6～50kg，1g | RS232：20ms | ||
| Detectability * | Default 1 |
Operating Temp.Range |
RS485：-20～+70℃ |
| Comprehensive Error | 0.005%F.S | RS232：-10～+70℃ | |
| Temp. Effect on Output | 0.002%F.S/℃ | Excitation,Recommende | 5～12VDC |
| Temp. Effect on Zero | 0.002%F.S/℃ | Safe Overload | 150% |
| Creep | 0.018%F.S/30mins | Ultimate Overload | 200% |
| Output | RS485 or RS232 | Cable | 4-Wire Shielded Cable |
|
Baud rate |
RS485：115200 | Cable length | φ4×400mm |
| RS232：19200 | Ingress Protection | IP65 | |
| A/D Sampling Rate | 1200 times/sec |
Communication Protocol |
RS485:MODBUS RTU and Custom protocol |
| A/D Resolution | 300000 | RS232:Custom protocol | |
WIRING
| RS232 | RS485 | Color | Explain |
| +V | +V | Red | 5～12VDC |
| GND | GND | Black | 0V |
| RD | A | Green | Connect external device TXD or A |
| TD | B | White | Connect external device RXD or B |
