TAL220A Miniature load cell
INTRODUCTION:
| Capacity | kg | 1,2,3,5,6,8,10,15,20 |
| Accuracy | %FS | 0.05 |
| Rated output | mV/V | 1.0± 0.15 |
| Recommend excitation | Vdc | 3~10 |
| Electrical connection | wire | 4 color wire, Ø0.8 × 200 mm |
Product Numbers:TAS501M
Product description:
Capacity ： 0.5~50kg
Material: alloy steel or stainless steel
Type: S type
Defend grade: IP67.
Application: electronic crane scale, hopper scale,mechanical conversion scale and other electronic weighing devices.
It is widely used in key force test and various key switch test of various 3C products such as computers;
Various insertion force tests, medical tests, and other industrial tests have high dynamic response frequencies.
Material: stainless steel
Size: S type, With overload protection function
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robot, mold assembly And other industrial test, measurement and systems.
Material: stainless steel
Size: miniature, Large range
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, mold assembly;
And other industrial test, measurement and control systems, etc.
Material: stainless steel, High precision
Size: Small size, Flat mountable
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, mold assembly And other industrial test, measurement and control systems.
Material: stainless steel
Size: Low height, Small Amount
Used in auto press assembly, automated assembly, 3C product testing New energy product assembly, medical testing, robotics, etc.
Model 13 (compression only) subminiature load cell is designed to measure load ranges from 150 g to 1000 lb. With subminiature dimensions, including diameters from 0.38 in to 0.75 in and heights of 0.13 in to 0.25 in, these units are easily incorporated into systems having limited space. Model 13 combines high frequency response and low deflection to achieve a combined non-linearity and hysteresis of 0.25 % to 0.5 % full scale. A balance module is included in the load cell’s lead wire cable for temperature compensation and should not be removed.
Product Numbers:TAL226
Product description:
Capacity ： 0.5~25kg
Material: aluminum
Type: Parallel beam type
Surface anodized and anti-corrosion
Defend grade: IP65
Application: Electronic top scale, floor scale, balance and industrial weighing system
Widely used in automobiles, robots and medical equipment;Used in situations where space is limited;
It is also used for research and development in various industries.
Material: stainless steel, High temperature performance can be determine
Size: Ultra-thin size, Low height
Model LFH-7I subminiature load cell is a low profile force transducer for applications with minimal space and high capacity requirements. This transducer utilizes foil strain gages to measure compression loads of up to 10,000 lb and achieves accuracy of ±0.7 % full scale. The top of the load cell is the area where the force is applied and the base ring of the load cell must be placed on a hard, machine-ground flat surface to obtain optimum accuracy.
Used in auto press assembly, automatic assembly, 3C product testing;New energy product assembly, medical testing, robotics;
Mold assembly and other industrial test, measurement and control systems, etc.
Material: stainless steel
Size: Small size, Large range, Shock proof
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, etc & High dynamic response frequency.
Material: stainless steel, High precision
Size: Slim design, Small size