Honeywell Model 53 Low Cost Load Cell
Honeywell / Model 53 / Low Cost Load Cell
Model 53 load cells are bonded foil strain gage transducers designed for cost efficient production and testing applications (i.e. press calibration). Engineered compression force measurements up to 50K lb., this model achieves a maximum non-linearity of 0.5 % full scale. Precision gaging techniques and a stainless steel construction provides excellent long-term stability and reliability under severe operating conditions. The Model 53 compression-only load cell has an integral load button machined as part of the load cell. The Model 53 must be mounted on a smooth flat surface for proper operation. Three tapped holes are provided for mounting.
Эластомер сенсора изготовлен из алюминиевого сплава, герметизирован клеем, поверхность обработана прозрачным анодированием. Степень защиты достигает IP65.
Product description:
Capacity ： 10,40kg
Material: alloy steel
Defend grade: IP66
Application : Palm scale, hand scales, electronic jewelry scales and kitchen scales, postal scales, fishing scales other electronic weighing devices.
Widely used in auto press assembly, automated assembly, 3C product testing,
New energy product assembly, medical testing, robotics;High dynamic response frequency.
Material: stainless steel, Customizable high temperature performance
Size: Small size, Low height
Model 34 precision miniature load cells measure both tension and compression load forces of 1000 g to 1000 lb. These models are our highest accuracy, rugged miniature load cells. Model 34’s welded, stainless steel construction is designed to eliminate or reduce to a minimum, the effects of off-axis loads. (The internal construction assures excellent long-term stability for ranges 1000 grams and above.) A modification permits this model to be completely welded for underwater applications. The Model 34 tension/compression load cell has female threads attachments. High accuracies of 0.15 % to 0.25 % full scale are achieved. Each bonded strain gage unit is built of welded 17-4 PH stainless steel for additional ruggedness. All load cells with ranges from 1 kg to 10 lb have an electrical balance module in the lead wire (approximately 1 in x .087 in thick). This balance module does not have to be the same temperature as the transducer.
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, mold assembly And other industrial test, measurement and control systems.
Material: stainless steel
Size: Low height, Small Amount
Used in manufacturing processes such as injection molding and extrusion;
Automobile press assembly, automated assembly, 3C product testing,
New energy product assembly, medical testing, robotics,Mold assembly and other industrial test, measurement and control systems;
Material: stainless steel Customizable high temp.
Size: Ultra-thin size
Product Numbers:TAL226
Product description:
Capacity ： 0.5~25kg
Material: aluminum
Type: Parallel beam type
Surface anodized and anti-corrosion
Defend grade: IP65
Application: Electronic top scale, floor scale, balance and industrial weighing system
Widely used in auto press assembly, automated assembly, 3C product testing;New energy product assembly, medical testing, robotics, mold assembly;
And other industrial test, measurement and control systems.
Material: 17-4PH stainless steel
Size: High speed, low deflection
Widely used in push and pull gauges, hopper scales, various industrial weighing systems, etc .;Welding force test and tension test, auto press assembly, automatic assembly, 3C product test;New energy product assembly, medical testing, robotics, mold assembly, and other industrial test, measurement, and control systems have high dynamic response frequencies.
Material: stainless steel With overload protection function
Size: S type, Low height
It is widely used in key force test and various key switch test of various 3C products such as computers;
Various insertion force tests, medical tests, and other industrial tests have high dynamic response frequencies.
Material: stainless steel
Size: S type, With overload protection function
Model 13 (compression only) subminiature load cell is designed to measure load ranges from 150 g to 1000 lb. With subminiature dimensions, including diameters from 0.38 in to 0.75 in and heights of 0.13 in to 0.25 in, these units are easily incorporated into systems having limited space. Model 13 combines high frequency response and low deflection to achieve a combined non-linearity and hysteresis of 0.25 % to 0.5 % full scale. A balance module is included in the load cell’s lead wire cable for temperature compensation and should not be removed.
It can be applied to auto press assembly, automated assembly, 3C product testing,New energy product assembly, medical testing, robotics, mold assembly, and other industrial testing;
Material: stainless steel
Size: Small size, Low height