Xjcsensor / X-ST32-H28-A / Static Torque Sensor

It is suitable for precision control of robot arms, grinding and polishing of curved surfaces, precise carving of machining centers, and precision testing of medical equipment.
Material: Aluminum alloy
Features: Low height

It is suitable for precision control of robot arms, grinding and polishing of curved surfaces, precise carving of machining centers, and precision testing of medical equipment.
Material: Aluminum alloy
Features: Low height

KWR85N207 series is a kind of static torque sensor, what is used to measure the output torque of the motor or reducer. Kunwei torque sensor features in high precision, high rigidity, thin thickness, light weight and strong bending resistance.

1、Static torque sensor is a kind of sensor used to measure the torque of a stationary or slowly rotating object.
2、The flange mounted sensor is connected with a load transfer device, which can output voltage or current signals.
3、Static torque sensors can be used in various industrial fields, such as electric screwdrivers, torque wrenches, wind turbines and so on.
4、Small size, light weight and convenient installation and use.
5、 High detection accuracy, good stability and strong anti-interference ability.

KWR61N150 Joint Torque Sensor is a high-precision product that uses RS485 communication output and 5V DC power supply. This product has an outer diameter of Φ 61mm and a height of 17.5mm, including the height of the built-in PCBA circuit board and the height of the fixing screws. When selecting products, it is often necessary to calculate the force situation of joints in the robot system to ensure that the torque sensor matches the joint torque parameters in the design, so that the torque is within the linear detection range. The detection range for repeatability, nonlinearity, and hys。teresis of this product is within 0.5% F.S. The torque borne by the joint can be expressed through a specific formula. After calculating the maximum torque borne by the joint, it can be used as a selection basis for sensor range and overload resistance. This product has a range of 150Nm and can withstand 200% safe overload and 300% ultimate destructive load. In addition, when subjected to lateral torsional loads, the maximum rated bending moment of the sensor is 110 Nm, the torsional stiffness is maintained within 214 kNm/Rad, and the maximum torsional angle does not exceed 0.04 °. When the sensor is subjected to lateral load, the maximum rated load is 14.42kN; in the direction of the sensor bearing axis, the rated load limit is 9.61 kN. The applicable working temperature range of this product is between -10 ℃ and 80 ℃, which can better adapt the torque sensor to various complex environments.

• Double flange connection, easy installation
• Applicable to measure and control of the static, non-continuous rotation torque force value

1、Static torque sensor is a kind of sensor used to measure the torque of a stationary or slowly rotating object.
2、The flange mounted sensor is connected with a load transfer device, which can output voltage or current signals.
3、It is used for static discontinuous rotation, non-standard customization, anti-interference signal stability, and is widely used in static torque testing systems such as testing machines, torque wrenches, steering gears, electric actuators, valves, transmissions, and hydraulic pressure.
4、Small size, light weight and convenient installation and use.
5、 High detection accuracy, good stability and strong anti-interference ability.

Applicable to measure and control of the static, non-continuous rotation torque force value

It is suitable for precision control of robot arms, grinding and polishing of curved surfaces, precise carving of machining centers, and precision testing of medical equipment.
Material: stainless steel Aluminum alloy
Features: High precision Strong anti-eccentricity Customizable

Torque sensor （KWR60N49）is a high-precision product that uses digital output. The outer diameter of this product is 60mm, the height is 21mm, and it works at the rated range of 49 Nm. Its accuracy can reach at least 0.5% F.S., and its nonlinear and hysteresis performance can be controlled within the accuracy range. In addition, after finite element analysis and verification, the sensor can withstand a lateral ultimate bending moment of 60 Nm, and its strong lateral torsional bearing capacity ensures stability under normal use. The torsional stiffness is maintained within 57 kNm/Rad, and the maximum torsional angle does not exceed 0.04 °. The axial ultimate load of 2 kN and the lateral ultimate load of 3 kN perform equally well. The excellent compressive and tensile performance lays a solid foundation for the digital signal output of the product in the direction of the rated torsional moment, thereby demonstrating outstanding performance. The sensor can operate within a wide temperature range of -10~80 ℃, with a temperature span of up to 90 ℃. Even in extremely harsh temperature environments, our sensor can maintain excellent performance. The product design is based on a solid theoretical foundation, and the test results have extremely high credibility.

KWR63N49 torque sensor is a precision measurement and control device designed specifically for the industrial and commercial robot fields. This product is made of specially designed high-strength stainless steel and integrates high-precision strain measurement circuits and digital signal processing systems internally. It can measure static torque in real time and accurately, and output RS485 signals. This product has the characteristics of high measurement accuracy (comprehensive accuracy ≤ 0.5% FS after calibration), good range stability (temperature self compensation from 0 ℃ to 60 ℃), and sensitive response (minimum resolution of 0.05Nm). It can provide reliable “force perception” capability for rotating machinery systems, helping customers achieve intelligent control and efficient management.