S beam load cell-AT52L
Description
AT52L S beam load cell is Aluminum alloy material, Mainly used for tension control, tensile testing etc.
Drawing
Contact us if you need the Datasheet PDF.
AMOWELLSENSOR / S beam load cell-AT52L
AT52L S beam load cell is Aluminum alloy material, Mainly used for tension control, tensile testing etc.
| Accuracy | 0.03%F.S/30min |
|---|---|
| Certificate | RoHS, CE |
| Capacity | 1,2,5kg |
| Creep | ±0.03%F.S/30min |
| Material | Aluminum alloy |
| Model | AT52L |
| Sensitivity | 1.2±3%mv/v |
| Size | 40*43.5*7.5mm |
50,100,200,500,1000,2000kg Or Customized S Beam Load Cell FA310 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA310 can be used to measure load 50kg,100kg,200kg,500kg,1000kg and 2000kg or customized capacity, its Creep(30min),Hysteresis and Repeatability all ≤0.025%F.S. or can be customized, and its Non-linearity ≤0.03%F.S. or can also be customized.
5,10,20,50,100,200N Or Customized S type Load Cell FA301 is a model of our brand FIBOS FA3-Series, S type Load Cell FA301 can be used to measure force 5N,10N,20N,50N,100N,200N or customized capacity, its material we use Stainless steel, we can also customized material.
- Capability: 0.1~20 kN
- Comprehensive precision: 0.5%FS
- Sensitivity: 1.0~1.5 mV/V
- Creep: ±0.05%FS/30min
이 센서는 인장 및 압축 양방향 하중을 정밀하게 측정할 수 있는 컴팩트한 구조로, 높은 정밀도와 안정성을 제공하며 다양한 산업용 측정 장비와 자동화 시스템에 적합합니다.
이 센서는 인장과 압축 양방향 하중을 측정할 수 있으며, 높은 정밀도와 안정성을 제공하고, 다양한 산업용 자동화 및 시험 장비에 적합한 구조적 특징을 가지고 있습니다.
Product description:
LP510S is special double ended shear beam load cell, its sharp is pin, it is with throughout-hole to accommodate strain gauge, instead of typical side 4pcs cavities, which improve sealing performance significantly, not easy damaged in harsh environment.
Main Features:
• Material: Stainless steel
• Rated Capacities: 25KN~90KN
• Through-hole to accommodate strain gauge
• IP Rating: IP69K
• Suitable for force measurement device and safety controlling against overload
• Excellent sealing performance
Category: Others
이 센서는 인장 및 압축 하중을 모두 측정할 수 있으며, 구조가 간단하고 정밀도 및 안정성이 우수하여 다양한 시험 및 자동화 장비에 적합합니다.
이 제품은 인장과 압축을 모두 측정할 수 있는 고정밀 센서로, 구조가 컴팩트하며 장기적인 안정성이 뛰어납니다. 다양한 시험기 및 자동화 시스템에서 광범위하게 활용됩니다.
LCT S-type Load Cells have been designed for measuring static and dynamic tensile and compressive forces.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-AX load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-AX load cells can be used to measure loads range from 2kg to 50kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 1mV/V output signal.
LAS-AX load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.
Product description:
S515 is a square-shaped tension & compression load cell, high-quality silica gel potting is to ensure it can work in harsh environment. Available in a wide range of capacities from 1KN to 10KN
Main Features:
• Material: Alloy steel ( thread)
• Rated Capacity: 1KN~10KN
• Calibrated based on criterion of ISO 376
• IP Rating: IP66
• Suitable for force measurement and overloading safety controlling.
• High precision by ISO 376 class 0.5, 1, 2.
Category: Tension
이 센서는 인장과 압축 양방향 하중을 정밀하게 측정할 수 있으며, 구조가 작고 설치가 용이하며, 장기간 안정성이 뛰어나 다양한 계측 및 자동화 응용 분야에 적합합니다.
25-500kg 0.75-10t Alloy Steel S Beam Load Cell FA307 is from S Beam Load Cell category of our brand FIBOS FA3-Series, FA307 can be used to measure load ranges from 25kg up to 500kg and ranges from 0.75t up to 10t capacity, its Non-linearity,Hysteresis and Repeatability all ≤0.03%F.S., its Creep(30min) ≤0.024%F.S..