The SK tension sensor offers a measurement range of 200 kg to 500 kg and is made of nickel-plated alloy steel, providing high capacity and waterproof performance. It is used for single-use online tension measurement of wires, cables, and similar process materials, and is widely applied in printing, composites, coating, paper, rubber, textiles, wires and cables, films, and other coiling control equipment and production lines.

SLB is used to monitor the strain of structures. It can be installed on the support or force structure of equipment such as cranes, punch presses and rolling mills, and the strain can be measured to reflect the change of force. It can also be installed in containers such as silos, tanks and other support structures, can also be used for lower precision weighing measurement.

Optimize your industrial tank weighing system with the SLD load cell.
This shear beam-type load cell is made of robust alloy steel, providing accurate and reliable measurements for a wide range of industrial weighing equipment, including tanks, hoppers, and silos. Its durable construction ensures consistent performance even in harsh working environments.

Installation of this weighing module is much simpler than traditional methods. There is no need to lift the silo; simply connect the silo legs to the weighing module bracket. The SLD module is designed to accommodate various leg types, allowing easy installation on most standard silos.

Compared to traditional weighing modules, this solution does not require lifting the silo during installation; you only need to connect the silo legs to the “A” frame bracket.
The “A” frame support is provided to accommodate various leg types, allowing easy installation on most standard silos.

The SQB Cantilever Beam Load Cell is engineered for high-precision and robust industrial weighing applications. Key features include:

• Material: 40CrNiMoA alloy steel (Grade A indicates high-quality steel with lower impurity levels than standard 40CrNiMo), providing excellent machinability, minimal processing deformation, and high fatigue resistance.

• Capacity range: 0.1 t to 10 t, offering a wide measurement range.

• Design: Cantilever beam structure with one fixed end and one load-bearing end, allowing multiple cells to be used together. The compact design enables easy installation.

• Applications: Suitable for small weighing platforms, modular assembly for material tanks, hoppers, and other industrial equipment.

• Performance: Excellent partial-load resistance and suitable for hazardous or explosive environments.

This load cell combines durability, precision, and flexible installation, making it ideal for industrial process control and weighing systems.

Model: SQB Kit Single Shear Beam Load Cell
Load Capacity: 100 kg, 300 kg, 500 kg, 1 t, 2 t, 3 t, 5 t
Accessories: Spacer and Mounting Base
Options: Indicator, Junction Box, Cable

The SQB-SS Cantilever Beam Load Cell is a compact and versatile weighing sensor designed for demanding industrial environments. Key details include:

• Capacity range: 0.5 t to 5 t

• Material: Stainless steel, welded and fully sealed

• Type: Cantilever Beam

• Protection rating: IP68, ensuring reliable operation in corrosive and wet environments

• Design features: One end is fixed; multiple units can be used in combination for larger installations

• Applications: Can be applied to small weighing platforms, modular assemblies, tanks, hoppers, and other industrial equipment requiring precise weight measurement

This load cell offers robust performance, corrosion resistance, and easy integration for both compact and modular weighing systems.

Suitable for a wide range of applications, it can operate reliably in humid and corrosive environments and is ideal for critical weighing and control in packaging machines, belt scales, hopper scales, platform scales, and the food and pharmaceutical industries.

The SSB cantilever beam load cell, with a measuring range of 5t, is made of 40CrNiMoA alloy steel. The band A indicates that it is a high-grade high-quality steel. Usually more than one is used, and it is mainly used for weighing ingredients of TMR full-mix ration feed mixer truck. The difference from WB is that the two move in different ways. WB is used on traction feed mixers, and SSB is used on stationary feed mixers.

The STC S-type alloy steel load cell is specially designed for hopper scale applications, and its name originates from its distinctive shape.
This sensor is capable of measuring both tension and compression loads.
It is manufactured from 40CrNiMoA alloy steel, which offers a high elastic limit and an excellent proportional limit.
The “A” designation indicates a high-quality grade of steel with lower impurity content than standard 40CrNiMo material.
After nickel plating, the load cell exhibits enhanced corrosion resistance, along with significantly improved hardness and insulation properties.

The S-type load cell is a sensor designed to measure both tension and compression forces.
The STP model is made of aluminum alloy and features a surface anodizing treatment and adhesive sealing process for enhanced durability.
It is compact, lightweight, and offers a narrow measuring range (2 kg to 50 kg).
The STP can be used with a single transmitter for tension and compression testing applications such as tensile gauges and similar equipment.

The STE utilizes a special hook-shaped design, making it ideal for hook scale applications.
It is a weighing sensor capable of measuring both tension and compression forces.
The STE is made of aluminum alloy and features an anodized surface sealed with adhesive, ensuring high accuracy and long-term stability.

The S-type name originates from its distinctive shape. It is a weighing sensor capable of measuring both tension and compression forces.
The STK model is made of aluminum alloy and features a sealed adhesive process and an anodized surface finish.
It offers high overall accuracy and excellent long-term stability.
The STK can measure from 10 kg to 500 kg, the same range as the STC model.
Although its material and size differ slightly, its usage and operation are similar to the STC model.

The S-type load cell derives its name from its distinctive shape and is a sensor suitable for both tension and compression measurement.
The STP model is made of aluminum alloy and features an anodized surface with adhesive sealing.
It is compact and lightweight, and can be used independently with a transmitter for tension and compression testing.

The S-type load cell is named after its distinctive “S” shape and is designed to measure both tension and compression forces. Its compact structure allows for easy installation and removal.
The STM model is made of stainless steel, offering excellent corrosion resistance and effectively preventing moisture ingress.
With a measuring range of 2 kg to 50 kg, it is ideal for integration into various measuring instruments to control and monitor loads.

The S-type load cell derives its name from its distinctive shape and is a sensor for both tension and compression measurement.
The STM model is made of stainless steel, providing excellent corrosion resistance and effectively preventing moisture ingress.
Its simple structure and compact size make it suitable for installation inside equipment to monitor forces.