LCT322 Reaction Torque Sensors Static Torque Sensors Torque Measurement with Angle Sensors
Product Introduction:
◎Cap.:±20nm,±50nm,±100nm,±200nm;
◎Accuracy: 0.1% FS;
◎Flange type static torque sensor;
Dimension:
Technical Parameter：
Static Torque Sensor
D 37.6mm*H 50.8mm
Capacity: 1,2,3,5,6,10,20,30,50,100,150N.m
Category: Static Reaction Torque Sensor
Static Torque Sensor
D 41.2mm*H 25mm
Capacity: 1,2,3,5,10,20,30, 50,100N.m
Category: Static Reaction Torque Sensor
Product description:
Capacity ：0-5-200N.m
Material: alloy steel
Type: torque type
Defend grade: IP67.
High accuracy, high stability, anti-interference
Application: suitable for static and non-continuous rotation torque force measurement.
Suitable for the measurement and control of static and discontinuous rotation torque.
Product description:
Capacity ：1~10~500N.m
Material: alloy steel
Type: torque type
Defend grade: IP67.
Small size, light weight and easy for installation.
Application: suitable for static and non-continuous rotation torque force measurement.
Product description:
Capacity ：5-50~5000N.m
Defend grade: IP67.
Type: torque type
Suitable for measuring the torque of static and discontinuous rotation.
Widely used for torque value measurement of static and discontinuous rotation, professional screwdriver, screw tightening, etc .; Compact structure for easy installation;
Material: Alloy steel
Features: Strong bending moment Long frequency life
The TJN-5 static torque measurement sensor is suitable for the measurement and control of static and discontinuous rotation torque.
Product description:
Capacity ：0-0.5-150N.m
Material: aluminum alloy
Type: torque type
Defend grade: IP67.
High accuracy, high stability, anti-interference
Application: suitable for static and non-continuous rotation torque force measurement.
The ZMNJ is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJ can be used in both clockwise and counterclockwise direction ranging from 1Nm up to 200Nm. The sensor is used in static and non-rotating torsion measure applications.
Features:
Capacity 1Nm-200Nm
Static torsion measure
Rational outputs
Nickel plated alloy steel
Optional features:
Hermetically sealed available
The ZMNJF2 is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJF2 can be used in both clockwise and counterclockwise direction ranging from 1000Nm up to 5000Nm. The sensor is used in static and non-rotating torsion measure applications.
Features:
Capacity 1000Nm-5000Nm
Static torsion measure
Rational outputs
Nickel plated alloy steel
Optional features:
Hermetically sealed available