The ZMMC4 is donut type force sensor which is available in a wide range of standard capacities from 5kg through to 2000kg. The ZMMC4 is configured for compression force measurement acting on cylinders, bolts or shafts. A range of internal through-hole diameters is available. The outer and inner diameter can be customized based on client’s requirements.

Stainless steel construction

MLC401E Hydraulic Press Forging Press Large Range Column Weighing Sensor 300t

Model: MLC401E
Category: Column weighing sensor
Measurement range: 20t, 25t, 30t, 40t, 50t, 60t, 70t, 100t, 150t, 200t, 300t, 400t
Size: 76 * 82.6mm; 125 * 142 millimeters; 223 * 250mm
Materials: alloy steel, stainless steel
Application: Automobile scale, electronic floor scale, hydraulic press, hydraulic press, dynamometer, large-scale weighing sensor

• Capacities: 0-12.5kN up to 0-540kN
• Output: 1.5mV/V nominal
• Environmental Protection: IP66
• Accuracy: <±1.5%/RC typical
• Custom-Sized Versions Available
• Low Height & Compact – To easily fit where space is limited.
• Optimum Performance Guaranteed – Its high-frequency response captures transient measurement fast.
• Long-Life and Low Maintenance – With its rugged stainless steel construction.
• Adapt It For Your Application – With our customisation service.
• Submersible Versions Available – Perfect for marine and offshore applications.

safety limiter load cell, overload load cell, pin load cell

Model: MLC161
Category: Bridge load cell
Load range: 2t,3t,4t
Dimension: Φ55*123mm
Material: alloy steel, stainless steel
Characteristic: safety limiter load cell,overload load cell,pin load cell

silo scale load cell,tank scale load cell,big capacity load cell,compression force load cell

Model: MLC410
Category: Compression load cell
Load range: 1t,2.2t,3.3t,4.7t,10t,15t,22t,33t,47t,68t,100t,150t, 220t, 330t
Dimension: 60*43mm/130*75mm/150*100mm
Material: alloy steel, stainless steel
Characteristic:silo scale load cell,tank scale load cell,big capacity load cell,compression force load cell

Compression force load cell, vehicle scale load cell, railroad scale load cell, hopper scale load cell.

Model: MLC401
Catalogue: Compression load cell
Rated load: 10, 25, 40, 60,100ton
Dimension: 152*184mm
Material: alloy steel, stainless steel
Apply to: compression force load cell, Vehicle scale load cell, railroad scale load cell, hopper scale load cell.

The Model D Donut Shaped Load Cell features a smooth thru-hole design often ideal for applications which require the load structure to pass directly through the cell. Such applications include bolt force measurements, clamping forces, and monitoring overloads. Load ranges as low as 150 grams and as great as 30,000 pounds can be measured within a maximum full scale non-linearity and hysteresis of ±0.5 % F.S., respectively. These models are used in compression applications and are available in multiple hole and frame sizes. For optimum performance, these cells must be mounted between load surfaces which are flat and parallel. The Model D miniature load cell is designed to have a minimum thickness.