Amowell AWD21A Load Cell Weight Sensor 4~20mA RS232 RS485 Output LED Indicator with 0.05%F.S Precision IP65 Protection
| Supply Voltage | 9V-30VDC |
|---|---|
| Comprehensive Precision | ≤0.05%F.S |
| Display | Single-row 5-digit LED highlighting (0.56 inch) |
| Power Consumption | ＜5W |
| Sensor Excitation Voltage | 5VDC±2%,100mA (up to 6 350Ω sensors can be connected) |
| Input Sensitivity | .4-6mV/V |
| Output Rate | 10, 40, 640, 1280 times/second |
| Operation Temperature | -30-60℃ |
| On-off Output | 2 way, 250VAC/3A |
| Accuracy | 1/10000 |
AWD21B Digital Weighing Controller Indicator is suitable for automatic control of various industries, such as ground measure, cement, food packaging, chemical ingredients, etc., special control can be customized.
| Power supply | 110/220v AC |
|---|---|
| Aux. power | 5V/80mA(1~ 4 load cell) |
| Output control | Relay: AC 250V/5A, Resistance load: SSR 24V/30mA |
| Analog output | 4-20mA / 0-10V |
| Signal input | Load cell/4-20mA/0-10V signal etc. |
| Accuracy | 0.2%F.S±2 digits |
| Insulation resistance | ≥100MΩ(DC 500V between terminal and out-shell) |
AWD21E Load Cell Weight Sensor RS232 RS485 Output controller matching debugging software.
| Model | AWD21E |
|---|---|
| Comprehensive Precision | ≤0.002%F.S |
| Supply Voltage | 24VDC |
| Display | Single-row 5-digit LED highlighting (0.56 inch) |
| Output Rate | ≤1280 times/second |
| Operation Temperature | -30-60℃ |
Bellow beam load cell, anti-fatigue, anti-eccentric load, can withstand two working modes of tension and compression.
| Model | AB51C |
|---|---|
| Capacity | 00.1，0.2，0.3，0.5，1，2,3，5，7，10 (kN) |
| Creep | ±0.02%F.S/30min |
| Sensitivity | 2.0mv/v |
| Material | Alloy steel |
| Certificate | RoHS, CE |
AM41L button load cell can measure the tension force, It is made of stainless steel,
| Accuracy | 0.03～0.05%F·S |
|---|---|
| Capacity | 3，5，10，20，30，50，100,150，200，300 (kN) |
| Certificate | RoHS, CE |
| Creep | ±0.03 %F·S/30min |
| Material | Stainless steel |
| Sensitivity | 2.0 mV/V |
Wide measuring range 20-2000KN. Zemic Brand strain gauge, high precision, sealed and moisture-proof.
| Model | AT53A |
|---|---|
| Accuracy | ±0.05%F.S |
| Capacity | 20，30，50，70，100，150,200，300，500，700，1000,2000 (kN) |
| Creep | ±0.05%F.S/30min |
| Material | Alloy steel |
| Sensitivity | 2.0mv/v |
| Certificate | RoHS, CE |
A full-bridge load cell, four wires, which can be used alone. The width is only 8mm, the design of two holes at both ends, one end is fixed, and the other end is stressed.
| Accuracy | ±0.2%F.S |
|---|---|
| Capacity | 10kg, 40kg |
| Creep | ±0.2%F.S/3min |
| Material | Alloy steel |
| Size | 40*8*3mm |
A full-bridge load cell, four wires, which can be used alone. The width is only 8mm, the design of two holes at both ends, one end is fixed, and the other end is stressed.
| Model | AM22BA |
|---|---|
| Size | 31.8*7.9*2.5mm |
| Capacity | 10kg, 40kg |
| Accuracy | ±0.3%F.S |
| Creep | ±0.2%F.S/3min |
| Material | manganese steel |
A full-bridge load cell, four wires, which can be used alone. The width is only 8mm, the design of two holes at both ends, one end is fixed, and the other end is stressed.
| Model | AM22C |
|---|---|
| Size | 45*19*2.5mm |
| Capacity | 40kg |
| Accuracy | ±0.1%F.S |
| Creep | ±0.05%F.S/3min |
| Material | manganese steel |
Small size half bridge load cell 50kg, 30*25*2.5mm
| Model | AM24C |
|---|---|
| Accuracy | ±0.1%F.S |
| Capacity | 50kg |
| Creep | ±0.1%F.S/3min |
| Material | manganese steel |
| Size | 30*25*2.5mm |
The AM33B load cell weight range is from 100g to 2000g, The load material is Aluminum alloy. Safe overload is 120%.
| Certificate | RoHS, CE |
|---|---|
| Accuracy | ±0.05%F.S |
| Capacity | 100g 200g 300g 500g 750g, 1kg, 2kg |
| Creep | ±0.05%F.S/3min |
| Material | Aluminum alloy |
| Model | AM33B |
| Sensitivity | 0.7±0.15mV/V |
| Size | 47*12*6 |
AM34A micro load cell capacity is 2kg. Accuracy is 0.1 %F·S. Size is 30×8.5×6 (4.8)mm, standard wire length is Φ0.65x 100mm.
| Accuracy | ±0.1%F.S |
|---|---|
| Capacity | 2kg |
| Certificate | RoHS, CE |
| Creep | ±0.1%F·S/ 2min |
| Material | Aluminum alloy |
| Model | AM34A |
| Sensitivity | 0.7 ±0.2 mv/v |
| Size | 30×8.5×6 (4.8)mm |
AM34B micro load cell weight range is 300g, 500g, 750g, 1kg, 2kg, 3kg,5kg；the accuracy is 0.05 % F.S；size is 45×9.3×6 mm；the cable is Φ0.8x200mm.
| Accuracy | 0.05%F.S |
|---|---|
| Capacity | 300g, 500g, 750g, 1kg, 2kg, 3kg,5kg |
| Certificate | RoHS, CE |
| Creep | 0.1%F·S/3min |
| Material | Aluminum alloy |
| Model | AM34B |
| Sensitivity | 300g: 0.7±0.15MV/V, 500g-750g: 0.8±0.15 MV/V, 1kg-5kg: 1.0±0.15 MV/V |
| Size | 45×9.3×6 mm |
AM34c micro load cell weight range is from 1kg to 50 kg；the accuracy is 0.05 %F·S；The size is 58×12.7×12.7 mm；the cable is Φ0.8x100mm.
| Accuracy | 0.05 %F·S |
|---|---|
| Capacity | 1kg-50 kg |
| Certificate | RoHS, CE |
| Creep | ±0.05 %F·S/3min |
| Material | Aluminum alloy |
| Model | AM34C |
| Sensitivity | 1.0 ± 0.15 mv/V |
| Size | 58×12.7×12.7 mm |
AM34D micro load cell have 10kg,20kg,30kg,40kg, 50kg, the accuracy is 0.3% F.S, small size 31.8*7.9*H mm, and the cable is Φ0.8×110mm.
| Accuracy | 0.3% F.S |
|---|---|
| Capacity | 10kg,20kg,30kg,40kg, 50kg |
| Certificate | RoHS, CE |
| Creep | 0.1 % F.S./3min |
| Material | manganese steel |
| Model | AM34D |
| Sensitivity | Table±0.2 mV/V |
| Size | 31.8*7.9*H mm |
AM34E micro load cell weight range is 3kg；the accuracy is 0.3%F.S；The size is 30 x 14 x 1 mm；the cable is 32AWG *120cm.
| Accuracy | 0.3%F.S |
|---|---|
| Capacity | 3kg |
| Certificate | RoHS, CE |
| Creep | 0.2% F.S/3min |
| Material | manganese steel |
| Model | AM34E |
| Sensitivity | 0.3±0.15mV/V |
| Size | 30x14x1 mm |