TAL230 Miniature load cell
INTRODUCTION:
| Capacity | kg | 10, 20, 30, 50 |
| Accuracy | %FS | 0.3 |
| Rated output | mV/V | 1.0~1.9±0.15 |
| Recommend excitation | Vdc | 3~10Vdc |
| Electrical connection | wire | 4 color Ø0.6 ×110 mm |
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, mold assembly And other industrial test, measurement and control systems.
Material: stainless steel
Size: Low height, Small Amount
Widely used in various industrial weighing systems such as push, pull gauge, hopper scale, etc .;Suitable for harsh environments.
Material: stainless steel
Size: Low height Small amount
Model 13 (compression only) subminiature load cell is designed to measure load ranges from 150 g to 1000 lb. With subminiature dimensions, including diameters from 0.38 in to 0.75 in and heights of 0.13 in to 0.25 in, these units are easily incorporated into systems having limited space. Model 13 combines high frequency response and low deflection to achieve a combined non-linearity and hysteresis of 0.25 % to 0.5 % full scale. A balance module is included in the load cell’s lead wire cable for temperature compensation and should not be removed.
Эластомер сенсора изготовлен из алюминиевого сплава, герметизирован клеем, поверхность обработана прозрачным анодированием. Степень защиты достигает IP65.
Widely used in welding force test, tension test, auto press assembly, automated assembly, 3C product test,New energy product assembly, medical testing, robotics, mold assembly, and other industrial test, measurement, and control systems;High dynamic response frequency.
Material: stainless steel
Size: S type Low height
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, mold assembly;
And other industrial test, measurement and control systems, etc.
Material: stainless steel, High precision
Size: Small size, Flat mountable
Model LFH-7I subminiature load cell is a low profile force transducer for applications with minimal space and high capacity requirements. This transducer utilizes foil strain gages to measure compression loads of up to 10,000 lb and achieves accuracy of ±0.7 % full scale. The top of the load cell is the area where the force is applied and the base ring of the load cell must be placed on a hard, machine-ground flat surface to obtain optimum accuracy.
Widely used in auto press assembly, automated assembly, 3C product testing,
New energy product assembly, medical testing, robotics;High dynamic response frequency.
Material: stainless steel, Customizable high temperature performance
Size: Small size, Low height
Product Numbers:TAL226
Product description:
Capacity ： 0.5~25kg
Material: aluminum
Type: Parallel beam type
Surface anodized and anti-corrosion
Defend grade: IP65
Application: Electronic top scale, floor scale, balance and industrial weighing system
Model 34 precision miniature load cells measure both tension and compression load forces of 1000 g to 1000 lb. These models are our highest accuracy, rugged miniature load cells. Model 34’s welded, stainless steel construction is designed to eliminate or reduce to a minimum, the effects of off-axis loads. (The internal construction assures excellent long-term stability for ranges 1000 grams and above.) A modification permits this model to be completely welded for underwater applications. The Model 34 tension/compression load cell has female threads attachments. High accuracies of 0.15 % to 0.25 % full scale are achieved. Each bonded strain gage unit is built of welded 17-4 PH stainless steel for additional ruggedness. All load cells with ranges from 1 kg to 10 lb have an electrical balance module in the lead wire (approximately 1 in x .087 in thick). This balance module does not have to be the same temperature as the transducer.
Widely used in push and pull gauges, hopper scales, various industrial weighing systems, etc .;Welding force test and tension test, auto press assembly, automatic assembly, 3C product test;New energy product assembly, medical testing, robotics, mold assembly, and other industrial test, measurement, and control systems have high dynamic response frequencies.
Material: stainless steel With overload protection function
Size: S type, Low height
Widely used in auto press assembly, automated assembly, 3C product testing;New energy product assembly, medical testing, robotics, mold assembly;
And other industrial test, measurement and control systems.
Material: 17-4PH stainless steel
Size: High speed, low deflection