DAYSENSOR / DYZ-106 / 미니어처 로드셀

Model 53 load cells are bonded foil strain gage transducers designed for cost efficient production and testing applications (i.e. press calibration). Engineered compression force measurements up to 50K lb., this model achieves a maximum non-linearity of 0.5 % full scale. Precision gaging techniques and a stainless steel construction provides excellent long-term stability and reliability under severe operating conditions. The Model 53 compression-only load cell has an integral load button machined as part of the load cell. The Model 53 must be mounted on a smooth flat surface for proper operation. Three tapped holes are provided for mounting.

Model 34 precision miniature load cells measure both tension and compression load forces of 1000 g to 1000 lb. These models are our highest accuracy, rugged miniature load cells. Model 34’s welded, stainless steel construction is designed to eliminate or reduce to a minimum, the effects of off-axis loads. (The internal construction assures excellent long-term stability for ranges 1000 grams and above.) A modification permits this model to be completely welded for underwater applications. The Model 34 tension/compression load cell has female threads attachments. High accuracies of 0.15 % to 0.25 % full scale are achieved. Each bonded strain gage unit is built of welded 17-4 PH stainless steel for additional ruggedness. All load cells with ranges from 1 kg to 10 lb have an electrical balance module in the lead wire (approximately 1 in x .087 in thick). This balance module does not have to be the same temperature as the transducer.

LC8022 is a small-range, small-volume, high-precision single-point weighing sensor. Made of aluminum alloy. the four corner deviations have been adjusted to ensure high weighing accuracy, anodized surface, and IP66 protection level. The sensor is suitable for electronic scales, medical equipment, and industrial process control.

Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, mold assembly;
And other industrial test, measurement and control systems, etc.

Material: stainless steel, High precision
Size: Small size, Flat mountable

Used in auto press assembly, automated assembly, 3C product testing New energy product assembly, medical testing, robotics, etc.

Used in injection molding and extrusion manufacturing processes;
Automobile pressing, 3C product testing, new energy product assembly,
Medical testing, robotics, and other industrial test, measurement, and control systems.

Widely used in auto press assembly, automated assembly, 3C product testing;New energy product assembly, medical testing, robotics;
Mold assembly and other industrial test, measurement and control systems, etc.

Material: stainless steel, High temperature performance can be determine, Customizable high temperature performance
Size: Thin design, Large range

이 제품은 낮은 높이와 높은 안정성, 정밀성을 갖춘 구조로 설계되었으며, 다양한 계량 및 자동화 테스트 장비에 폭넓게 활용됩니다.

Used in manufacturing processes such as injection molding and extrusion;
Automobile press assembly, automated assembly, 3C product testing,
New energy product assembly, medical testing, robotics,Mold assembly and other industrial test, measurement and control systems;

Material: stainless steel Customizable high temp.
Size: Ultra-thin size

Widely used in automobiles, robots and medical equipment;Used in situations where space is limited;
It is also used for research and development in various industries.

Material: stainless steel, High temperature performance can be determine
Size: Ultra-thin size, Low height