AML / In-Line Column Load Cell | High Capacity | DBCL


  • Capacities: 0-1te up to 0-150te
  • Output: 1.5mV/V
  • Environmental Protection: IP66
  • Submersible Versions Available (IP68)
  • Special Capacities To 1500te+
  • Tough Marine and Underwater Submersible Versions Available
  • High-Pressure Water Jet Protection as Standard – For use in Most Industrial Environments
  • Optimise Signal Integrity and Reduce Noise – With our Integrated Signal Conditioning Options

Share it:

In-Line Column Load Cell | High Capacity | DBCL

Low Diameter, Adaptable and Ideal for High Force Applications Applied Measurements DBCL high capacity in-line column load cell is suitable for the measurement of tension and compression and are ideal for high force applications where a device with a low diameter is required. The DBCL load cell is sealed to IP66 as standard and manufactured from stainless steel. Optionally we can increase the sealing to IP68 for tough marine and offshore applications where submersion depths of 6500 metres or more can be catered for if required. Integrated signal conditioning is also available with the choice of various analogue and digital outputs. Our standard DBCL high capacity in-line column load cell design is available in capacities up to 150 tonnes, however, we can supply much larger versions on request. To date the largest custom high capacity in-line column load cell we have supplied had a capacity of 1500 tonnes! Please contact our Applied Measurements expert sales team using the form in the sidebar if you require a special version of any description and we will be please to assist you.

Technical Specifications

Rated Capacity (RC) tonnes 0-1, 0-2, 0-3, 0-5, 0-7.5, 0-10, 0-20, 0-30, 0-50, 0-75, 0-100, 0-150
Operating Modes Tension/Compression / Tension & Compression
Sensitivity (RO) mV/V 1.5 (nominal)
Zero Balance/Offset ±%/Rated Output <2.0
Output Symmetry (tension vs. compression ±%/Rated Load <0.1% typical
Accuracy ±%/Rated Load <0.20
Non-Linearity ±%/Rated Output <0.20
Hysteresis ±%/Rated Output <0.20
Repeatability ±%/Rated Output <0.10
Temperature Effect on Zero ±%/Rated Output/ ˚C <0.010
Temperature Effect on Sensitivity ±%/Applied Load/ ˚C <0.010
Bridge Resistance Ohms 1te: 350Ω , 2 to 50te: 700Ω , 15 to 150te: 1400Ω
Insulation Resistance Megohms >5000 @ 50Vdc
Excitation Voltage Volts AC or DC 10 recommended (2-15 acceptable)
Operating Temperature Range ˚C -20 to +70
Compensated Temperature Range ˚C -10 to +50
Storage Temperature Range ˚C -20 to +70
Safe Overload % of Rated Capacity 150
Ultimate Overload % of Rated Capacity 300
Deflection @ Rated Capacity Consult sales
IP Rating (Environmental Protection) IP66 (IP67 or IP68 submersible optional)
Weight (excluding cable) See dimension table
Fatigue Life 108 cycles typical (109 cycles on fatigue rated version)
Cable Length (as standard) metres 5
Electrical Connection 6-pin bayonet lock connector with 5m mating cable assembly
Construction Material Stainless Steel
Resolution See dimension table
Note: The DBCL is calibrated in compression only as standard. Calibration in tension is available for an additional charge.

Product Dimensions

DBCL High Capacity In-Line Column Load Cell Outline Drawing
Capacity (te) B C ØD Thread T Weight kgs Resolution (tonnes)
1 76 16 31 M12x1.25 0.4 0.001
2 76 16 31 M12x1.25 0.4 0.002
3 84 22 38 M20x1.5 0.7 0.005
5 84 22 38 M20x1.5 0.7 0.005
7.5 108 29 44 M24x2 1.3 0.01
10 108 29 44 M24x2 1.3 0.01
20 203 50 57 M36x3 3.3 0.02
30 355 89 114 M64x4 20 0.02
50 355 89 114 M64x4 20 0.05
75 458 100 130 M100x3 35.7 0.05
100 458 100 130 M100x3 35.7 0.1
150 458 100 156 M100x3 40.5 0.2

All dimensions are in mm

Wiring Details

6 Pin Bayonet Connector Wire Designation
Pin A Red +ve excitation
Pin B Blue -ve excitation
Pin C Green +ve signal (tension)
Pin D Yellow -ve signal
Screen To ground — not connected to load cell body
Pins E & F Not connected

V1.0

Ordering Codes & Options

Core Product Capacity (inc Engineering Units) Cable Length (m) Specials Code Example Result
DBCL 1t 005 000 DBCL-1t-005-000
DBCL 2t 005 000 DBCL-2t-005-000
DBCL 3t 005 000 DBCL-3t-005-000
DBCL 5t 005 000 DBCL-5t-005-000
DBCL 7.5t 005 000 DBCL-7.5t-005-000
DBCL 10t 005 000 DBCL-10t-005-000
DBCL 20t 005 000 DBCL-20t-005-000
DBCL 30t 005 000 DBCL-30t-005-000
DBCL 50t 005 000 DBCL-50t-005-000
DBCL 75t 005 000 DBCL-75t-005-000
DBCL 100t 005 000 DBCL-100t-005-000
DBCL 150t 005 000 DBCL-150t-005-000