Pressure Sensor Φ12.6×15mm PC13-Ⅰ
Features
■ With constant current and constant voltage excitation options
■ Imported highly reliable pressure die
■ Wide temperature compensation
■ Normalized output available
■ Compensation board filled with glue for protection against moisture
■ All 316L material
■ High performance, all solid, high reliability
Applications
■ Process control systems
■ Pressure calibration instruments
■ Refrigeration equipment and HVAC control
■ Hydraulic systems and valves
■ Level measurement
■ Biomedical instruments
■ Ships and navigation
Product Parameters
| Electrical performance parameters | ||
| Pressure range | 6MPa…60MPa | |
| Pressure reference | Sealed gauge pressure | |
| Excitation | 1.5mA recommended for constant current
10V recommended for constant voltage |
|
| Input impedance | Constant current: 2kΩ～5kΩ
Constant voltage: 3kΩ～18kΩ |
|
| Electrical connection | Gold-plated KOVAR pin or silicon soft wire | |
| Compensation temp. | Constant current: -10℃～70℃ | |
| Operating temp. | -40℃～125℃ | |
| Storage temp. | -40℃～125℃ | |
| Insulation resistance | ≥200MΩ/250VDC | |
| Response time | ≤1ms (up to 90%FS) | |
| Measured medium | All the liquids and gases compatible with 316L. | |
| Mechanical vibration | 20g (20～5000Hz) | |
| Shock | 100g (10ms) | |
| Service life | 10×106 (cycles) | |
| Structural performance parameters | ||
| Diaphragm material | 316L | |
| Housing material | 316L | |
| Oil filling | Silicon oil | |
| Sealing ring | Fluorine rubber | |
| Basic parameters | |||||||
| Item | Condition | Min | Nominal | Max | Unit | Note | |
| Nonlinearity | -0.3 | ±0.2 | 0.3 | %FS | Note⑴ | ||
| Hysteresis | -0.05 | ±0.03 | 0.05 | %FS | |||
| Repeatability | -0.05 | ±0.03 | 0.05 | %FS | |||
| Zero output | -2 | ±1 | 2 | mV | |||
| Full scale span output | 1.5mA
10V |
60
80 |
90
100 |
150
120 |
mV | ||
| Zero temp. coefficient | -1.5 | ±0.75 | 1.5 | %FS | Note(1) | ||
| Sensitivity temp. coefficient | -1.5 | ±1.0 | 1.5 | %FS | Note⑵ | ||
| Thermal hysteresis | -0.075 | ±0.05 | 0.075 | %FS | Note⑶ | ||
| Long term stability | -0.3 | ±0.2 | 0.3 | %FS/Year | |||
Note:
(1) Calculate according to BFSL least square method.
(2) In the compensation temperature range, refer to 30 ℃ for -10 ℃ ~ 70 ℃
(3) After passing high and low temperature, return to the reference temperature.
| Structure and dimensions |
In mm
1. PC13I 2. PC13 II
| Sealed gauge pressure
|
Sealed gauge pressure
|
 |
 |
| Electrical connection (in mm) |
1. PC13I 5pins (5p) with constant-current excitation
Please confirm with the technician for the details of constant-voltage excitation.
|
Pin Definition
3 Excitation +(IN+) 1 or 5 Excitation -(IN-) 2 Output +(OUT+) 4 Output -(OUT-)
|
| Electrical connection (in mm) (cont.) |
2. PC13I 4wires (4w)
|
|
Wire color Definition
Red Excitation+(IN+) Blue Excitation-(IN-) Yellow Output+(OUT+) White Output-(OUT-) |
3. PC13II 5pins (5p) with constant-current excitation
Please confirm with the technician for the details of constant-voltage excitation.
|
Pin Definition
3 Excitation+(IN+) 1 or 5 Excitation-(IN-) 2 Output+(OUT+) 4 Output-(OUT-)
|
| 4. PC13II 4wires (4w) | |
 |
Pin Definition
Red Excitation+(IN+) Blue Excitation-(IN-) Yellow Output+(OUT+) White Output- (OUT-) |
| Pressure range selection | ||||||
| Code | Pressure reference | Pressure range | Overpressure | Burst pressure | O-ring | |
| 6M | S | 0～6MPa | 200％FS | 400％FS | Fluorine rubber | |
| 10M | S | 0～10MPa | 200％FS | 400％FS | Fluorine rubber | |
| 16M | S | 0～16MPa | 150％FS | 300％FS | Fluorine rubber | |
| 25M | S | 0～25MPa | 150％FS | 300％FS | Fluorine rubber | |
| 40M | S | 0～40MPa | 150％FS | 200％FS | Fluorine rubber | |
| 60M | S | 0～60MPa | 150％FS | 200％FS | Fluorine rubber | |
S: Sealed gauge pressure
