SL5123 Platform Scale Bending Beam Load Cell
Product FeaturesMulti-axis force sensor is a kind of force sensor which can measure the force and torque components in more than two directions simultaneously. Multi — axis force sensors are divided into two — axis force sensors, three — axis force sensors and six — axis force sensors. The three-axis force sensor can simultaneously detect the change of force value in three directions, X axis, Y axis, Z axis (vertical force), and output three groups of voltage signals. Three-dimensional force sensor, high-speed sampling, high-speed dynamic response, anti-interference, long-term stable performance, sensitive response; And it is small in size and light in weight, can measure spatial acceleration, and can fully and accurately reflect the motion properties of objects. |
Technical Specifications
| Specfications | Technique | |
| Maximum capacity (Emax) | 5,7,8,10,15,20,30,50,75,100,150,200kg | |
| Accuracy class | OIML R60 C3 | OIML R60 C4 |
| Maximum number of load cell intervals (nLC) | 3000 nmax | 4000 nmax |
| Ratio of minimum LC verification interval Y=Emax / Vmin | Emax/10000 Vmin | Emax/15000 Vmin |
| Combined error | ≤ ±0.020%FS | ≤ ±0.018%FS |
| Creep | ≤ ±0.016%FS/30min | ≤ ±0.012%FS/30min |
| Temperature effect on sensitivity | ≤ ±0.011%FS/10℃ | ≤ ±0.009%FS/10℃ |
| Temperature effect on zero | ≤ ±0.015%FS/10℃ | ≤ ±0.010%FS/10℃ |
| Output sensitivity (=FS) | 2.0±0.2mV/V | |
| Input resistance | 384±4Ω | |
| Output resistance | 350±3.5Ω | |
| Insulation resistance | ≥ 5000MΩ(50VDC) | |
| Zero balance | ≤ ±1.5%FS | |
| Compensated temperature | -10 ～+40℃ | |
| Operating temperature | -35 ～+70℃ | |
| Excitation recommended voltage | 5 ～ 12VDC | |
| Excitation maximum | 18VDC | |
| Safe overload | 150%FS | |
| Ultimate overload | 300%FS | |
| Corner correction | 0.02%load value/100mm | |
| Recommended torque on fixation | 10N.m | |
| ATEX classification (optional) | II1GExia II1CT4/II1DExiaD20 T73℃/ II3GExnLIICT4 | |
| Wiring | Green: Input+, Blue：Sense+，White: Output+, Shield: Transparent, Black: Input-,Yellow：Sense-，Red: Output- Cable diameter: Φ5mm Standard cable length: 1m | |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
