TAL220D Miniature load cell
INTRODUCTION:
| Capacity | kg | 80,100,150,200 |
| Accuracy | %FS | 0.05 |
| Rated output | m V/V | 1.0 ±0.15 |
| Recommend excitation | Vdc | 5 ~ 10 |
| Electrical connection | cable | 4 shielded PVC cable Ø0.3×250 mm |
Widely used in welding force test, tension test, auto press assembly, automated assembly, 3C product test,New energy product assembly, medical testing, robotics, mold assembly, and other industrial test, measurement, and control systems;High dynamic response frequency.
Material: stainless steel
Size: S type Low height
Product Numbers:TAS501M
Product description:
Capacity ： 0.5~50kg
Material: alloy steel or stainless steel
Type: S type
Defend grade: IP67.
Application: electronic crane scale, hopper scale,mechanical conversion scale and other electronic weighing devices.
Эластомер сенсора изготовлен из алюминиевого сплава, герметизирован клеем, поверхность обработана прозрачным анодированием. Степень защиты достигает IP65.
Product Numbers:TAL226
Product description:
Capacity ： 0.5~25kg
Material: aluminum
Type: Parallel beam type
Surface anodized and anti-corrosion
Defend grade: IP65
Application: Electronic top scale, floor scale, balance and industrial weighing system
It is widely used in key force test and various key switch test of various 3C products such as computers;
Various insertion force tests, medical tests, and other industrial tests have high dynamic response frequencies.
Material: stainless steel
Size: S type, With overload protection function
Model LFH-7I subminiature load cell is a low profile force transducer for applications with minimal space and high capacity requirements. This transducer utilizes foil strain gages to measure compression loads of up to 10,000 lb and achieves accuracy of ±0.7 % full scale. The top of the load cell is the area where the force is applied and the base ring of the load cell must be placed on a hard, machine-ground flat surface to obtain optimum accuracy.
Used in manufacturing processes such as injection molding and extrusion;
Automobile press assembly, automated assembly, 3C product testing,
New energy product assembly, medical testing, robotics,Mold assembly and other industrial test, measurement and control systems;
Material: stainless steel Customizable high temp.
Size: Ultra-thin size
Widely used in auto press assembly, automated assembly, 3C product testing;New energy product assembly, medical testing, robot, mold assembly;
And other industrial test, measurement and systems.
Material: stainless steel
Size: Small size, Large range
Mainly used in auto press assembly, automated assembly, 3C product testing;New energy product assembly, medical testing, robotics, mold assembly;
And other industrial test, measurement and control systems.
Material: stainless steel
Size: miniature
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robotics, etc & High dynamic response frequency.
Material: stainless steel, High precision
Size: Slim design, Small size
Model 53 load cells are bonded foil strain gage transducers designed for cost efficient production and testing applications (i.e. press calibration). Engineered compression force measurements up to 50K lb., this model achieves a maximum non-linearity of 0.5 % full scale. Precision gaging techniques and a stainless steel construction provides excellent long-term stability and reliability under severe operating conditions. The Model 53 compression-only load cell has an integral load button machined as part of the load cell. The Model 53 must be mounted on a smooth flat surface for proper operation. Three tapped holes are provided for mounting.
Widely used in auto press assembly, automated assembly, 3C product testing;New energy product assembly, medical testing, robotics, mold assembly;
And other industrial test, measurement and control systems.
Material: 17-4PH stainless steel
Size: High speed, low deflection