트랜스미터는 고신뢰성 코어를 사용하여 압력 신호를 모니터링하고, 이 신호는 집적 회로를 통해 처리되어 국제 표준 출력 신호를 생성합니다. 압력 감지 소자에는 첨단 온도 보상 기술이 적용되어 측정 정확도와 혹독한 환경에서의 연속 작동을 보장하며, 탁월한 성능과 품질을 보장합니다. 이 제품은 고정밀, 안정성, 긴 수명, 높은 신뢰성, 그리고 간편한 설치가 특징입니다. 다양한 지능형 디지털 제어 기기, 단일 및 다중 루프 레귤레이터, 산업용 컴퓨터, 분산 제어 시스템과 통합되어 생산 공정의 자동화된 측정 및 제어를 구현할 수 있습니다.

트랜스미터는 고신뢰성 코어를 사용하여 압력 신호를 모니터링하고, 이 신호는 집적 회로를 통해 처리되어 국제 표준 출력 신호를 생성합니다. 압력 감지 소자에는 첨단 온도 보상 기술이 적용되어 측정 정확도와 혹독한 환경에서의 연속 작동을 보장하며, 탁월한 성능과 품질을 보장합니다. 이 제품은 고정밀, 안정성, 긴 수명, 높은 신뢰성, 그리고 간편한 설치가 특징입니다. 다양한 지능형 디지털 제어 기기, 단일 및 다중 루프 레귤레이터, 산업용 컴퓨터, 분산 제어 시스템과 통합되어 생산 공정의 자동화된 측정 및 제어를 구현할 수 있습니다.

A cantilever beam load cell consists of an elastic body, strain gauges, and measurement circuitry. Cantilever beam sensors typically employ a single-end fixed configuration, where one end is rigidly fixed while the other end is freely suspended. Unlike parallel beam sensors, the strain gauges for cantilever beam sensors need to be affixed closer to the fixed end, whereas those for parallel beam sensors are attached to the top and bottom surfaces of the two beams. The working principle of load cells can be referenced from the introduction of CP series load cells.

Our company’s CBD series digital cantilever load cell is a digital sensor that comes with a high-precision analog-to-digital conversion module, allowing it to output digital signals rather than analog ones. Compared to analog sensors, digital sensors have the following advantages:

1. Digital signals have stronger interference resistance;

2. They support various compensation functions, such as temperature compensation and load offset compensation;

3. Communication speed is significantly improved compared to analog signals.

The CBD series digital load cells offer a wide measurement range from 220 kg to 4400 kg, with an accuracy class up to C6 level. Additionally, they feature IP68/IP69K protection ratings, providing better protective performance in industrial production environments.

Parallel beam sensors mainly consist of an elastic body, strain gauges, and measurement circuits. The elastic body of parallel beam sensors uses a dual parallel beam structure, typically made from aluminum alloy or stainless steel. When the elastic body deforms under external force, the strain gauges attached to its surface also deform, causing changes in their resistance values. These changes in resistance values are converted into electrical signals through the measurement circuit and then transformed into readable weighing values via an analog-to-digital converter (ADC module). Parallel beam sensors, known for their simple structure, high precision, wide measurement range, and good stability, have become one of the most commonly used types of load sensors in industrial fields, especially suitable for high-precision measurement scenarios.
Our company’s CP series parallel beam load cells are high-performance single-point load cells with a measurement range of 3 kg to 750 kg, available in multiple size specifications. The product has obtained the China Measuring Instruments Type Approval Certificate (CPA) and achieves precision levels of C5/C6, with repeatability error ≤ ±0.01 F.S., meeting customers’ precision requirements across different weighing ranges. The operating temperature of the product is -30°C to +65°C, with an IP67 protection rating. It features automatic corner adjustment, compact design, and temperature compensation, significantly enhancing its accuracy and stability when used in industrial environments. Due to its excellent performance, the CP series load cells are widely used in various industrial and retail weighing applications such as electronic price scales, packaging scales, and process weighing control systems.

The KWT1B123 load cell is one of the typical shear beam load cells. It has extremely accurate measurement results, and has a certain self-protection ability. All stainless steel and hermetically sealed the compact size of KWT1B123 makes it the ideal choice for multi-head weighing equipment and low capacity vessel and so on.

KWT1B150 is a kind of normal structure weighing sensor, the deign of its tructure makes this weighing sensor easy to install and integrate.

KWT1D42H is a large range column though-hole force sensor. The large load structure can pass through KWT1D42H, the max diameter of which is 12.7mm.

KWT1D52 is a tension-compression bowl-type load cell, suitable for high-speed response measurement. The sensor adopts built-in bending moment compensation, even in the process of using bending moment or lateral force , the test results can be obtained reliably. Since this is a sensor based on the strain principle, static and dynamic measurements are possible.

KWT1D78 (cable gland) series uniaxial force sensor is suitable for the measurement of tensile force and compressive force. It adopts a unique integral multi-spoke structure or multi-beam bending design, has excellent stiffness characteristics and anti-eccentric load capacity.

KWT1L90 is a single axis force sensor with a force measurement direction parallel to the mounting surface. The entire body is made of alloy steel, with high strength and stiffness characteristics, to meet the use needs of special force measurement directions.

LCT Miniature compression load cells are made of LCT’s advanced strain gauge technology.These load cells are designed for applications in a space limited area.
The capacities of LAU-C1/LTU-C1 start from 5kg to 10kg.The measuring accuracy is 1%R.O.(R.O.=Rated Output).) Manufactured from high quality aluminum alloy/stainless steel of aviation standard.
LAU-C1/LTU-C1 load cells are mainly used for flat mounting weighing systems and force measuring in a narrow space.

LCT Miniature compression load cells are made of LCT’s advanced strain gauge technology.These load cells are designed for applications in a space limited area.
The capacities of LAU-C1/LTU-C1 start from 5kg to 10kg.The measuring accuracy is 1%R.O.(R.O.=Rated Output).) Manufactured from high quality aluminum alloy/stainless steel of aviation standard.
LAU-C1/LTU-C1 load cells are mainly used for flat mounting weighing systems and force measuring in a narrow space.

Based on LCT advanced metal foil strain gauge technology,LCT’s torque sensors are made from aluminum alloy and sealed to IP65 protection grade.
Model LAN-X1 load cells are designed to this “torque/multidirection force”type and manufactured from high quality aluminum alloy of aviation standard. LAN-X1 oad cells can be used to measure loads range from 10N to 50N with the measuring accuracy of 0.2% R.O.( R.O.=Rated Output)
LAN-X1 load cells are mainly used for force measuring in a narrow space, torque wrensh and torsion measurement of shaft and multidirection force measuring systems.

Based on LCT advanced metal foil strain gauge technology,LCT’s torque sensors are made from aluminum alloy and sealed to IP65 protection grade.
Model LAN-X1 load cells are designed to this “torque/multidirection force”type and manufactured from high quality aluminum alloy of aviation standard. LAN-X1 oad cells can be used to measure loads range from 10N to 50N with the measuring accuracy of 0.2% R.O.( R.O.=Rated Output)
LAN-X1 load cells are mainly used for force measuring in a narrow space, torque wrensh and torsion measurement of shaft and multidirection force measuring systems.

LCT Single Point Load Cells have been designed such that their excellent mechanical and measurement properties can be optimally used in a wide range of applications. A Single Point Load Cells is also called Platform Load Cell.
Advantages of LCT Single Point Load Cells / Platform Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and only one unit is sufficient to build up a scale.
Model LAB-B3 load cells are designed to this “single point”type and manufactured from high quality aluminum alloy of aviation standard. LAB-B3 load cells can be used to measure loads range from 3kg to 50kg with the measuring accuracy of 0.02% R.O.( R.O.=Rated Output)
LAB-B3 load cells are mainly used for price computing scales,counting scales,weighing scales,retail scales and bench scale.

LCT Single Point Load Cells have been designed such that their excellent mechanical and measurement properties can be optimally used in a wide range of applications. A Single Point Load Cells is also called Platform Load Cell.
Advantages of LCT Single Point Load Cells / Platform Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and only one unit is sufficient to build up a scale.
Model LAB-B3 load cells are designed to this “single point”type and manufactured from high quality aluminum alloy of aviation standard. LAB-B3 load cells can be used to measure loads range from 3kg to 50kg with the measuring accuracy of 0.02% R.O.( R.O.=Rated Output)
LAB-B3 load cells are mainly used for price computing scales,counting scales,weighing scales,retail scales and bench scale.