- Capacities: 0-10Nm to 0-50kNm
- mV/V Strain Gauge Bridge Output
- Environmental Protection: IP65
- Accuracy: <±0.25%/Rated Capacity
- Custom Capacities to 200kNm+
- Ideal for Bolting Between Machinery to Measure Direct Torque
- IP65 Protected From Low Pressure Water Jets
- Offshore and Marine Submersible Versions Available
- Fast and Simple Installation with its Integrated Connector
- Customised Shaft and Configuration Options to Suit Your Exact Application
- Capacities: 0-50N/0-1Nm to 0-250kN/0-2500Nm
- Accuracy: <±0.1%/RC
- Low Crosstalk
- Environmental Protection: IP65
- Custom Versions Available
- Reduced Cross Talk Guarantees Optimum Performance
- Ideal for use in the Geotechnical and Materials Testing Sectors
- Customisation Available to Suit Your Specific Application
- Ideal for use in Most Industrial Environments
- Capacities: 0-1Nm up to 0-20Nm
- 0 to ±5Vdc Output
- Non-Linearity: <±0.15%/Rated Capacity
- Max Speed: 10,000 rpm (depending on capacity)
- Maintenance Free Thanks to its Non-Contact Technology
- High Accuracy to less than ±0.15% of Rated Capacity
- Hexagonal Drive for Electric Screwdrivers
- Fast and Simple To Use
- Compact with Integrated Signal Amplifier for Limited Space
- Approved UK Distributor of ETH Torque Transducers
- Capacities: 0-2te up to 0-1500te
- Output: 2mV/V (1.5mV/V on 500te+)
- Accuracy: <±0.10%
- IP67 & IP68 Submersible Options
- Domed-Top Versions Available
- Superior Accuracy Guaranteed – BS EN ISO 376 calibration certification if required.
- Submersible Versions Available – Perfect for marine and off-shore applications.
- Let us do the work for you – The CCDHA can be supplied as a complete system.
- Capacities: 0-1te up to 0-150te
- Output: 1.5mV/V
- Environmental Protection: IP66
- Submersible Versions Available (IP68)
- Special Capacities To 1500te+
- Tough Marine and Underwater Submersible Versions Available
- High-Pressure Water Jet Protection as Standard – For use in Most Industrial Environments
- Optimise Signal Integrity and Reduce Noise – With our Integrated Signal Conditioning Options
- Capacities: 0-50N up to 0-50kN
- Output: 0.75mV/V to 2mV/V
- Fully Submersible: IP68 to 10m
- Accuracy: <±0.15%/RC (0.05% typical)
- Optional Integral Amplifier
- Ideal for any Freshwater Application
- Fully Submersible Long-Term Immersion Protected
- Underwater Protection Guaranteed Thanks to ‘O’ Ring Sealing
- Greater Underwater Depth Ratings Available for Deep Sea Applications
- Special Versions Alternative Construction Materials for Seawater and other Corrosive or Aggressive Media.
- Capacities: 0-1te to 0-1000te
- High Tensile Carbon Steel
- Environmental Protection: IP67
- Optional Amplified Output
- Rugged Construction – High Tensile Carbon Steel
- Ideal for Harsh Industrial Environments
- IP67 Protection Rating for Submersion up to 1 metre in Water
- Simple Construction & Operation
- Optional Load Centralising Bobbin – For Optimum Performance
- Can be Supplied with Amplified Output
- Capacities: 0-0.5Nm to 0-1000Nm
- ±5Vdc Output
- Non-Linearity: <±0.3%/Rated Capacity
- Low-Cost
- Max Speed: 9000 to 20,000rpm (Depending on Capacity)
- Specially Designed Couplings
- Optional 60 Pulses/Revolution Speed Output
- Maintenance Free Thanks to its Non-Contact Technology
- Optimum Performance Guaranteed with Specially Designed Couplings
- Compact with Integrated Signal Amplifier for Limited Space Applications
- Fast and Simple Installation with a Variety of Mounting Options
- Capacities: 0-0.5Nm to 0-1000Nm
- Real-Time Speed Updates of 1x Sample/Second
- Fast Torque Updates of 1,000 Samples/Second
- ±5Vdc Output
- Non-Linearity: <±0.3%/Rated Capacity
- Max Speed: 9000 to 22,000rpm
- Optional 60 Pulses/Revolution Speed Output
- Space Saving with its Built-In 4 Segment LCD Display
- Maintenance-Free Thanks to its Non-Contact Technology
- Captures Dynamic Torque Changes Fast
- Low-Cost – No Additional Instrumentation Needed
- Optimum Performance Guaranteed with Specially Designed Couplings
- Compact with Integrated Signal Amplifier for use Where Space is Limited
- Fast and Simple Installation with a Variety of Mounting Options
- Capacities: 0-200N up to 0-2000N
- Output: 2mV/V
- Environmental Protection: IP65
- High Accuracy: <±0.1%/RC
- Optional Fatigue-Rated Versions
- Low Profile to Easily Fit Where Space is Limited
- Perfect for both Weighing and Force Measuring
- Ideal for Dynamic Measurements Thanks to its High Frequency Response
- Customisation Available to Suit your Specific Application
- Let us do the work for you – We can Supply the DSCRC as a Complete Measuring System
- Capacities: 0-25N up to 0-250N
- Ø9mm and 2.9mm Height
- Environmental Protection: IP53
- Accuracy: <±0.25%/RC
- Integral Load Button
- Very Compact – At Ø9mm x 2.9mm height it easily fits into the smallest of spaces.
- Save on Installation Time – Ideal for retrofitting into existing designs.
- Optimum Performance Guaranteed – With its integral load button.
- Ideal for Compression Measurement with Limited Space.
- Capacities: 0-100N up to 0-20kN
- Output: 2mV/V nominal (1.5mV/V on 0-100N)
- Environmental Protection: IP65
- Accuracy: <±0.5%/RC
- Integral Load Button
- Very Compact – At Ø30mm x 12mm height it easily fits into the smallest of spaces.
- Save on Installation Time – Ideal for retrofitting into existing designs.
- Optimum Performance Guaranteed – From its integral load button
- Let us do the hard work for you – The CDFM3 can be supplied with our wide range of instrumentation.
- Capacities: 0-100N up to 0-50kN
- Output: 2mV/V
- Environmental Protection: IP65
- Accuracy: <±0.30%/RC
- Low Profile Design
- Low Profile & Integral Mounting Threads Make it Ideal to use in Small Spaces
- Designed for Both Tension and Compression Monitoring
- Customisation Available to Suit Your Application
- Excellent at Monitoring Fast Changes Thanks to its Low Deflection
- Load Cell Capacities: 0-100N up to 0-50kN
- Load Cell Output: 2mV/V
- Accuracy: <±0.30%/RC
- Integral Mounting Threads
- 6-Digit LED Display (±999999)
- 10 Point Linearisation Optional
- IP65 Environmental Protection
- Supplied Calibrated & Ready to Use
- DDE Miniature In-Line Load Cell + INT4-L Load Cell Display
- 6 Digit LED Display for High Accuracy Applications
- 10 Point Linearisation to Guarantee Superb Accuracy
- IP65 Dust-Tight and Splashproof Protection for Industrial Environments
- Load Cell Customisation Available
- Capacities: 0-0.2Nm to 0-50Nm
- 1.3mV/V Output
- Very Compact Size
- Non-Linearity: <±0.2%/Rated Capacity
- Max Speed: 8000rpm
- Ultra Compact for Mounting in Tight Spaces
- Ideal for Electrical Motors, Pumps and Gearboxes
- Integrated Mounting Pedestal and a Detachable Cable Assembly
- Slip Ring Based Design
- Capacities: 0-0.2Nm to 0-1000Nm
- 1.3mV/V Output
- Non-Linearity: <±0.1%/Rated Capacity
- Very Compact Size
- Low Cost
- For Static or Semi-Rotary Torque (Less Than 1 Revolution) Applications
- Ultra-Compact for Mounting in Tight Spaces
- Ideal for Electrical Motors, Pumps and Gearboxes
- Fast and Simple Installation with Customised Shaft and Configuration Options
- Let us Customise the Design to Suit Your Exact Application