BRG-LY101 S type Load Cells
Product overview
The working principle of the S-type tension and compression load cell is based on elastic deformation. When an external object applies tension or pressure, the elastic structure inside the sensor will bend and deform. This deformation will cause the resistance of the strain gauge inside the sensor to change, and then output the corresponding force value through an electrical signal. It has high precision and strong resistance to lateral force, and is suitable for various industrial automation equipment, electronic scales, laboratory testing, etc.
1.Pull pressure two-way force ·
2.The structure is compact·
3. The comprehensive accuracy is high ·
4. Long-term stability is good ·
5. Quality alloy steel with nickel plati ng ·
Technical Data
| qualification | ||
| Rated quantitative schedule | Kg | 0-20T |
| Output sensitivity | mV/V | 2.0 |
| Zero point output | %F.S. | 0.05 |
| Non-linear | %F.S. | 0.05 |
| lag | %F.S. | 0.05 |
| Repeatability | %F.S. | 0.05 |
| Creep (30 min) | %F.S. | 0.05 |
| Temperature sensitivity drift | %F.S./10℃ | 0.05 |
| Zero temperature drift | %F.S./10℃ | 0.05 |
| Response frequency | Hz | 1k |
| Material | 42CrMoA | |
| impedance | Ω | 350 |
| Insulation resistance | MΩ/100V DC | ≥5000 |
| Use voltage | V | 5-15 |
| Operating temperature range | ℃ | -20-80 |
| Safety overload | %R.C. | 150 |
| Extreme overload | %R.C. | 200 |
| Cable line specifications | m | ＜2T：Φ5,3m
＞2T：φ5,5m |
| Cable limit pull force | N | 98 |
| TEDS | selectable | |
1 ) High temperature sensors are availabl e, wi th a maxi mum operating temperature of 1 50℃.
2) High impedance sensors can be provided with an output impedance of 1 000 Ω
Dimension (mm)
| Range | φA | B | Φc | D | E | M |
| 0-1000kg | 44 | 88 | 28 | 56 | 26 | M16*1.5 |
| 1-5T | 58 | 112 | 38 | 68 | 44 | M24*3 |
| 10T | 84 | 160 | 60 | 104 | 58 | M36*4 |
| 20T | 88 | 156 | 68.5 | 108 | 76 | M36*4 |
Force diagram
42crmo alloy steel
S-type sensor, reasonable structural design, made of 42crmo alloy steel with rounded chamfers, fine sandblasting appearance, long service life;
42crmo alloy steel, high hardness, strong toughness, durable, no rust and oxidation resistance in humid environment
AVIC high-precision strain gauges
High measurement accuracy, and can work in extreme environments such as high temperature, low temperature, and high pressure..
Threaded hole device
The sensor has threaded holes on the top and bottom for easy installation. It is widely used in belt scales, hopper scales, and batching scales.
Multiple ranges available
