BRG-502 Non Contact Torque Transducer
BRG-502 Non Contact Torque Transducer
- Still torque can be measured, with the rotational torque;
- Strong interference resistance, high accuracy and good stability;
- Output signal digital function, small volume and light weight;
- Easy to install, energy, and signal non-contact transmiss ion funct ion;
- The signal is delivered regard less of rotation, speed and steering;
- Repeated zero adjustment is not required to continuously transmit positive and reverse torque signals;
- No wear parts such as collectorring, can run for a long time;
- There is no bearing between the housing and the rotating disk, su itable for long high speed operation and static / dynamic torque signal
Technical Parameters
| range | N.m | 0-50000 |
| Speed range | Rpm | 15000 |
| Speed signal | Pu lse / turn | 5-15k |
| Power Supply Voltage | V DC | 24 or ±15 |
| current | mA | <0.2 |
| Zero point output | %F.S. | 0.2 |
| nolinear | %F.S. | 0.2 |
| lag | %F.S. | 0.05 |
| repetitiveness | %F.S. | 0.05 |
| Creep (30 min) | %F.S. (30 min) | 0.05 |
| Temperature sensitivity drift | %F.S./10℃ | 0.05 |
| Zero point temperature drift | %F.S./10℃ | 0.05 |
| response frequency | KHz | 10 |
| material quality | 42CrMoA | |
| Year stability | /year | 0.3% |
| impedance | Ω | 350/700±10 |
| insulation resistance | MΩ/100V DC | ≥5000 |
| operating temperature range | ℃ | -20-80 |
| relative humidity | %RH | 0-90% |
| Safe overload | 120% | |
| Extreme overload | 150% | |
| Cable line specifications | Φ5*3 | |
| Cable limit tension | N | 98 |
Dimension (mm)
| range(N.m) | 5-50 |
| range(N.m) | 100-500 |
| range(N.m) | 800 |
| range(N.m) | 1000-2000 |
| range(N.m) | 4000-10000 |
It can operate at high speed for extended periods of time. There are no bearings between the outer casing and the rotating disk, allowing it to adapt to long-term high-speed operation and transmit static/rotational/static/dynamic torque signals.
Flange-type torque sensors can be directly mounted on transmission equipment. The stator ring is fixed to the outer ring of the rotating rotor and supported by the stator base.
Installation Method:
1. The disc-type torque sensor consists of two parts: a stator (stationary housing) and a rotor (rotating disc).
2. Connect both ends of the rotor to the power source or load via flange couplings.
3. Fix the stationary housing to the base, adjust the clearance to ensure that the stationary housing and the rotating disc do not contact each other, and the radial runout must not exceed 0.5mm!
42CrMo Alloy Steel
Good hardenability and strong resistance to mechanical fatigue;
1. Thickened body
2. Corrosion and rust prevention
3. Precision casting
It Can Measure Static Torque And Rotational Torque
There are no bearings between the housing and the rotating disk, which can adapt to long-term high-speed operation. It can transmit static/rotational/static dynamic torque signals.
High-precision Strain Gauges
AVIC’s high-precision strain gauges offer high measurement accuracy, low creep, minimal thermal hysteresis, and good long-term stability.
