S beam load cell -AT52I
Description
AT52I S beam load cell is Aluminum alloy material, low cost. Mainly used for crane scale, hopper scale, tensile testing etc.
Drawing
Contact us if you need the Datasheet PDF.
AMOWELLSENSOR / S beam load cell -AT52I
AT52I S beam load cell is Aluminum alloy material, low cost. Mainly used for crane scale, hopper scale, tensile testing etc.
| Accuracy | ±0.05%F.S |
|---|---|
| Certificate | RoHS, CE |
| Capacity | 10,20,30,50,100kg |
| Creep | ±0.05%F.S/30min |
| Model | AT52I |
| Material | Aluminum alloy |
| Sensitivity | 2.0±10%mV/V |
| Size | 50.8*50.8*18mm |
The ZMSSA S type load cell provides good restraint to possible movement of the automation and in many cases. The small size gives excellent performance for high capacity loading. The output is rationalized to facilitate multiple-cell application. ZMSSA is contructed of stainless steel and is potted to IP67 providing excellent protection against moisture and humidity.
Features:
Capacity 5kg-200kg
Both tension and compression
Rational outputs
Stainless steel
Optional features:
Hermetically sealed available
- Capability: 0.1~20 kN
- Comprehensive precision: 0.5%FS
- Sensitivity: 1.0~1.5 mV/V
- Creep: ±0.05%FS/30min
LCT S-type Load Cells have been designed for measuring static and dynamic tensile and compressive forces.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-C1 load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-C1 load cells can be used to measure loads range from 50kg to 500kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 2mV/V output signal.
LAS-C1 load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-C1 load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-C1 load cells can be used to measure loads range from 50kg to 500kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 2mV/V output signal.
LAS-C1 load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.
이 제품은 고정밀의 인장 및 압축력 측정을 위한 센서로, 견고하고 콤팩트한 구조를 갖추고 있으며, 다양한 산업용 저울과 테스트 장비에 광범위하게 적용됩니다.
이 센서는 인장과 압축 양방향 하중을 정밀하게 측정할 수 있으며, 구조가 작고 설치가 용이하며, 장기간 안정성이 뛰어나 다양한 계측 및 자동화 응용 분야에 적합합니다.
이 제품은 인장력과 압축력을 모두 측정할 수 있는 고정밀 센서로, 구조가 작고 안정성이 뛰어나며, 다양한 산업 및 시험 장비에 적합합니다.
Product description:
LP510S is special double ended shear beam load cell, its sharp is pin, it is with throughout-hole to accommodate strain gauge, instead of typical side 4pcs cavities, which improve sealing performance significantly, not easy damaged in harsh environment.
Main Features:
• Material: Stainless steel
• Rated Capacities: 25KN~90KN
• Through-hole to accommodate strain gauge
• IP Rating: IP69K
• Suitable for force measurement device and safety controlling against overload
• Excellent sealing performance
Category: Others
이 센서는 인장과 압축을 모두 측정할 수 있는 구조로, 높은 정밀도와 안정성을 제공하며, 다양한 산업용 및 시험용 하중 측정 장비에 적합한 고성능 센서입니다.
이 센서는 인장과 압축 양방향 하중을 측정할 수 있으며, 높은 정밀도와 안정성을 제공하고, 다양한 산업용 자동화 및 시험 장비에 적합한 구조적 특징을 가지고 있습니다.
Product description:
S515 is a square-shaped tension & compression load cell, high-quality silica gel potting is to ensure it can work in harsh environment. Available in a wide range of capacities from 1KN to 10KN
Main Features:
• Material: Alloy steel ( thread)
• Rated Capacity: 1KN~10KN
• Calibrated based on criterion of ISO 376
• IP Rating: IP66
• Suitable for force measurement and overloading safety controlling.
• High precision by ISO 376 class 0.5, 1, 2.
Category: Tension
S형 로드셀은 인장 및 압축 겸용 센서입니다. STP는 알루미늄 합금으로 제작되고 표면 양극 산화 처리 및 접착 밀봉 공정을 거쳐 소형, 경량, 좁은 측정 범위(2kg~50kg)를 제공하며, 단일 트랜스미터와 함께 사용하여 인장 및 압력 테스트(인장 게이지 등)에 사용할 수 있습니다.
5,10,20,50,100,200N Or Customized S type Load Cell FA301 is a model of our brand FIBOS FA3-Series, S type Load Cell FA301 can be used to measure force 5N,10N,20N,50N,100N,200N or customized capacity, its material we use Stainless steel, we can also customized material.