Very low corner load error
Good cost-benefit ratio
Available with 05 % accuracy and in a legal-for-trade version
Use in hazardous zone with protection class Ex ia IIC T4 Gb / Ex ia IIIC T125 °C Da or protection class
Ex nA IIC T4 Gc / Ex tc IIIC T125 °C Dc
ATEX and IECEx certification
Optimized by exact calibration for parallel circuits
Six-wire circuitry
100 % Stainless steel
Very low corner load error
Good cost-benefit ratio
Available with 05 % accuracy and in a legal-for-trade version
Use in hazardous zone with protection class Ex ia IIC T4 Gb / Ex ia IIIC T125 °C Da or protection class
Ex nA IIC T4 Gc / Ex tc IIIC T125 °C Dc
ATEX and IECEx certification
Optimized by exact calibration for parallel circuits
Six-wire circuitry
100 % Stainless steel
SC601은 상업용으로 설계된 단일형 로드셀입니다. 구조가 간단하여 고정단과 유동단 사이의 측정이 용이합니다. 또한, SC601은 다양한 용도에 적합한 넓은 측정 범위를 제공하여 매우 다재다능하며, 최대 120kg까지 측정 가능합니다.
This SC601 is a single type load cell designed for commercial applications. Its simple structure allows easy measurement between its fixed end and floating end. The SC601 is also very versatile with a wide measurement range for many different applications and has a maximum on 120kg.
이 SC601AC는 고용량 어플리케이션용으로 설계된 단일형 로드셀입니다. SC601과 동일한 구조를 따르지만, 최대 200kg의 더 높은 용량을 달성하기 위해 약간 더 큽니다. SC601AC는 양쪽 끝에 삼각형 모양의 구멍 3개가 있는 약간 다른 장착 방식을 가지고 있습니다. 적절한 구멍 크기와 간격은 기계 도면을 참조하십시오.
This SC601AC is a single type load cell designed for high capacity applications. It follows the same structure of the SC601 but is slightly larger in order to achieve higher capacities of up to 200kg. The SC601AC also has a slightly different mounting setup with 3 holes on each end in triangle formation. Please refer to the mechanical drawings for proper hole size and spacing
SC602는 대용량이 필요한 소형 어플리케이션을 위해 설계된 단일형 로드셀입니다. SC601과 동일한 구조를 가지고 있지만, 설치 공간을 최소화하기 위해 더 짧습니다. 더 작은 크기에도 불구하고 최대 100kg의 넓은 측정 범위를 유지합니다.
This SC602 is a single type load cell designed for compact applications that need high capacity. It follows the same structure of the SC601 but is shorter to minimize its foot print. Despite its smaller size is still maintains the wide measurement range for this load cell type with a maximum of 100kg.
Signle Point Load Cell
L 110mm*W 33mm*H 10mm
Capacity: 0.3,0.5,1,1.5,2,3,4,5kg
Category: Single Point Load Cell
Signle Point Load Cell
L 110mm*W 33mm*H 10mm
Capacity: 0.3,0.5,1,1.5,2,3,4,5kg
Category: Single Point Load Cell
Signle Point Load Cell
L 110mm*W 30mm*H 22mm
Capacity: 3,6,10,20,30kg
Category: Single Point Load Cell
Signle Point Load Cell
L 80mm*W 50mm*H 20mm
Capacity: 3,5,7.5,15,20,30,50,75,100,150,200kg
Category: Single Point Load Cell
Signle Point Load Cell
L 71mm*W 6.5mm*H 14mm
Capacity: 100g，200g
Category: Single Point Load Cell
Signle Point Load Cell
L 71mm*W 6.5mm*H 14mm
Capacity: 100g，200g
Category: Single Point Load Cell
Cantilever Beam Load Cell
L 150mm*W 25mm*H 40mm
Capacity: 10,20,50,100kg
Category: Single Point Load Cell
For customised ranges, accuracy, dimensions and other parameters, please contact us.
Cantilever Beam Load Cell
L 133.4mm*W 30.7mm*H 30.2mm(size optional)
Capacity: 0.22,0.55,1.1,1.76,2.2,4.4t
Category: Single Point Load Cell
For customised ranges, accuracy, dimensions and other parameters, please contact us.
Bellow Beam Load Cell
D 42mm*L 123mm
Capacity: 5,10,20,50,100,200,500kg
Category: Single Point Load Cell
Signle Point Load Cell
L 150mm*W 39mm*H 25.4mm
Capacity: 1,3,5,7,10,15,20,30,50,75,100,150,200kg
Category: Single Point Load Cell