GW 정하중 계량 모듈은 LCC430 컬럼형 로드셀을 채택하였으며,
측정 범위는 10톤에서 50톤까지입니다.

컴팩트한 구조로 별도의 부속품 설치가 필요 없으며,
자가 안정화 센서 베어링 헤드 덕분에 정확한 측정과 우수한 반복성을 제공합니다.

빠르고 간편한 설치로 설치 시간과 유지보수에 따른 가동 중단 시간을 절감할 수 있습니다.
이 정하중 계량 모듈은 다양한 형태의 컨테이너에 쉽게 장착할 수 있으며,
컨테이너 내에서 적재, 배칭, 교반 작업을 손쉽게 수행할 수 있습니다.

LCD832는 인장 및 압축용 이중 용도 디스크 로드셀로, 용량 범위가 5kg에서 5t까지 광범위하며, 구조가 컴팩트하고, 평면이 낮으며, 용량이 작은 알루미늄 합금으로 가볍고 조작이 간편합니다. 스테인리스 스틸은 50kg 이상 사용 가능하며, 내식성이 강하고, 습하고 부식성 있는 환경에서도 사용 가능하며, 나사형 설계로 설치 및 분해가 빠르고 간편하며, 힘 측정 장치, 시험기, 힘 측정기 및 기타 장비, 인장 방향 측정에 적합합니다.

101M 계량 모듈은 STC 고품질 S형 센서를 사용하며, 높은 계량 정확도와 우수한 장기 안정성, IP66 등급의 방진·방수 성능을 갖추고 있습니다.
탱크 배칭 공정의 계량 제어 등 다양한 산업 현장에 적합합니다.

101M 계량 모듈은 5kg부터 5톤까지 선택 가능한 STC S형 센서를 사용하며,
각 모듈에는 U자형 연결구와 핀 한 쌍, 아연도금 탄소강 하드웨어가 기본 제공되어,
중량이 있는 용기를 안정적으로 지지하며, 다양한 산업 장비에 설치 가능합니다.
서스펜션 방식이 적용된 모든 호퍼나 컨테이너에 적합하게 설계되었습니다.

마이크로 힘 센서(Micro Force Sensor)는 압축 및 인장 겸용 MDT 로드셀로, 스테인리스 스틸 소재로 제작되었으며 IP66 등급의 방진방수 기능을 갖추고 있습니다. 측정 용량은 2kg부터 50kg까지 지원됩니다.

MDT는 인장과 압축을 모두 측정할 수 있는 이중 용도의 초소형 로드셀입니다. 스테인리스 스틸로 제작되어 부식성 및 습한 환경에서도 정상적으로 사용할 수 있습니다. 크기가 작고 구조가 컴팩트하여 설치가 간편하며, 높은 종합 정밀도와 우수한 안정성을 제공합니다. 작업 공정 중의 힘을 모니터링하기 위해 장비 내부에 설치할 수 있습니다.

Based on LCT advanced metal foil strain gauge technology,LCT’s torque sensors are made from aluminum alloy and sealed to IP65 protection grade.
Model LAN-X1 load cells are designed to this “torque/multidirection force”type and manufactured from high quality aluminum alloy of aviation standard. LAN-X1 oad cells can be used to measure loads range from 10N to 50N with the measuring accuracy of 0.2% R.O.( R.O.=Rated Output)
LAN-X1 load cells are mainly used for force measuring in a narrow space, torque wrensh and torsion measurement of shaft and multidirection force measuring systems.

LCT Miniature compression load cells are made of LCT’s advanced strain gauge technology.These load cells are designed for applications in a space limited area.
The capacities of LAU-C1/LTU-C1 start from 5kg to 10kg.The measuring accuracy is 1%R.O.(R.O.=Rated Output).) Manufactured from high quality aluminum alloy/stainless steel of aviation standard.
LAU-C1/LTU-C1 load cells are mainly used for flat mounting weighing systems and force measuring in a narrow space.

LCT Miniature compression load cells are made of LCT’s advanced strain gauge technology.These load cells are designed for applications in a space limited area.
The capacities of LAA-ADA-A current is 3kg.The measuring accuracy is 1%R.O.(R.O.=Rated Output).) Manufactured from high quality aluminum alloy of aviation standard.
LAA-ADA-A load cells are mainly used for flat mounting weighing systems and force measuring in a narrow space.

LCT Single Point Load Cells have been designed such that their excellent mechanical and measurement properties can be optimally used in a wide range of applications. A Single Point Load Cells is also called Platform Load Cell.
Advantages of LCT Single Point Load Cells / Platform Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and only one unit is sufficient to build up a scale.
Model LAK-B load cells are designed to this “single point”type and manufactured from high quality aluminum alloy of aviation standard. LAK-B load cells can be used to measure loads range from 0.3kg to 3kg with the measuring accuracy of 0.03% R.O.( R.O.=Rated Output)
LAK-B load cells are mainly used for electronic balances,counting scales,jewellery scales and retail scales.

LCT S-type Load Cells have  been designed for measuring static and dynamic tensile and compressive forces.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-AX load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-AX load cells can be used to measure loads range from 2kg to 50kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 1mV/V output signal.
LAS-AX load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.

LCT S-type Load Cells have  been designed for measuring static and dynamic tensile and compressive forces.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-AX1 load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-AX1 load cells can be used to measure loads range from 10kg to 100kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 2mV/V output signal.
LAS-AX1 load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.

Model: LHP-1
Truck Scale, Dynamic Railway Scale, Hopper Scale
Accessories: Load Head, Mounting Kits

Model: LHP-11
Truck Scale, Dynamic Railway Scale, Hopper Scale
Accessories: Load Head, Mounting Kits

Model: LHP-15
Truck Scale, Dynamic Railway Scale, Hopper Scale
Accessories: Load Head, Mounting Kits

Model: LHP-1
Truck Scale, Dynamic Railway Scale, Hopper Scale
Accessories: Load Head, Mounting Kits

Model: LHP-3
Truck Scale, Dynamic Railway Scale, Hopper Scale
Accessories: Load Head, Mounting Kits