SL5131 Nickel Plated Shear Beam Load Cell
Product FeaturesMulti-axis force sensor is a kind of force sensor which can measure the force and torque components in more than two directions simultaneously. Multi – axis force sensors are divided into two – axis force sensors, three – axis force sensors and six – axis force sensors. The three-axis force sensor can simultaneously detect the change of force value in three directions, X axis, Y axis, Z axis (vertical force), and output three groups of voltage signals. Three-dimensional force sensor, high-speed sampling, high-speed dynamic response, anti-interference, long-term stable performance, sensitive response; |
Technical Specifications
| Specfications | Technique | ||||
| Maximum capacity (Emax) | 0.5/1/2/2.5/3/4/5/6/7.5t;1/1.5/2/2.5/3/4/5/7.5/10/20klb | ||||
| Accuracy class | C3 | C4 | c5 | A5M | B10M |
| Approvals | OIML R60 C3 | OIML R60 C4 | OIML R60 C5 | III 5000 Multiple | III L 10000 Multiple |
| Maximum number of load cell intervals (nLC) | 3000nmax | 4000nmax | 5000 | 5000 | 10000 |
| Ratio of minimum LC verification interval YEmax/Vmin | Emax/10000Vmin | Emax/14000Vmin | Emax/18000Vmin | Emax/15000Vmin | Emax/10000Vmin |
| Combined error | ≤±0.020%FS | ≤±0.018%FS | ≤±0.010%FS | ≤±0.026%FS | ≤±0.050%FS |
| Creep | ≤±0.016%FS/30min | ≤±0.012%FS/30min | ≤±0.010%FS/30min | <±0.017%FS/30min | – ≤±0.040%FS/30min |
| Temperatureeffectonsensitiity | ≤±0.011%FS/10C | ≤±0.009%FS/10C | ≤±0.008%FS/10℃ | ≤±0.013%FS/10℃ | ≤±0.040%FS/10℃ |
| Temperature effect on zero | ≤±0.015%FS/10C | ≤±0.010%FS/10C | ≤±0.014%FS/10C | ||
| ≤±0.007%FS/10C | ≤±0.020%FS/10℃ | ||||
| Output sensitivity (=FS) | 3.0±0.003mV/V 2.0±0.002mV/V | ||||
| Input resistance | 350+3.5Ω | ||||
| Output resistance | 350±3.5Ω | ||||
| Insulation resistance | ≥5000MΩ(50VDC) | ||||
| Zero balance | ≤1.0%FS | ||||
| Compensated temperature | -10~+40°C | ||||
| Operating temperature | -35~70C | ||||
| Excitation,recommended voltage | 5~12VDC | ||||
| Excitation maximum | 18VDC | ||||
| Safe overload | 150%FS | ||||
| Ultimate overload | 300%FS | ||||
| Recommended torque on fixation | M12:100N.m,M18:200N.m,M24:700N.m | ||||
| ATEX classification (optional) | IIIG Ex ia II1C T4/I1D Ex iaD20 T73°C/II3G Ex nL II C T4 | ||||
| “S1” Output Sensitivity | 2.0±0.002Mv/V | ||||
| Wiring | Red: Input+, Green: Output+, Transparent: Shield,Black: Input-,White: Output- Shielded, 4 conductor cable diameter: D5mm;Standard cable length for 100kg- 2t: 4m and 6m for the higher capacities |
||||
Product Dimensions
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
