SL5127 Pricing Scale Aluminium Single Point Load Cell
Product FeaturesMulti-axis force sensor is a kind of force sensor which can measure the force and torque components in more than two directions simultaneously. Multi – axis force sensors are divided into two – axis force sensors, three – axis force sensors and six – axis force sensors. The three-axis force sensor can simultaneously detect the change of force value in three directions, X axis, Y axis, Z axis (vertical force), and output three groups of voltage signals. Three-dimensional force sensor, high-speed sampling, high-speed dynamic response, anti-interference, long-term stable performance, sensitive response; And it is small in size and light in weight, can measure spatial acceleration, and can fully and accurately reflect the motion properties of objects. |
Technical Specifications
| Specfications | Technique | ||
| Maximum capacity (Emax) | 50/80/100/150/200/250/300/350/400/500kg | ||
| Output sensitivity (=FS) | 2.0+0.2mV/V | ||
| Accuracy class | C3 | c4 | c5 |
| combined error | ±0.02%FS | ±0.015%FS | ±0.01%FS |
| Creep | ±0.0167%FS/30min | ±0.0125%FS/30min | ±0.01%FS/30min |
| Temperature effect on sensitivity | ±0.0175%FS/10C | ±0.0131%FS/10C | ±0.01%FS/10C |
| Temperature effect on zero | ±0.02%FS/10C | ±0.012%FS/10℃ | ±0.009%FS/10℃ |
| Zero balance | ±2%FS | ||
| Compensated temperature | -10~40C | ||
| Operating temperature | -35~65C | ||
| Input resistance | 406+6Ω | ||
| Output resistance | 350+3Ω | ||
| Insulation resistance | ≥5000MΩ(50VDC) | ||
| Excitation, recommended voltage | 5~12VDC | ||
| Excitation maximum | 18VDC | ||
| Safe overload | 120%FS | ||
| Ultimate overload | 150%FS | ||
| Protection Class | IP65 | ||
| Cable specification | o5.3mm | ||
| Cable length | 2m | ||
| Recommended scale size | 600x600mm | ||
| Corner correction Recommended torque on fixation |
0.02% load value/100mm | ||
| 20N.m | |||
| Wiring | Red:Input+, Green:Output+, Transparent: Shield,Black: Input-,White: Output- | ||
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
