SOP-DY200 Weighing Scale Load Cell Indicator
Specification
|
Power Supply
|
AC100~240V, 50~60HZ, Power consumption≤5W
|
|
Display
|
LED display. display range: -9999~29500
|
|
Accuracy
|
0.05%
|
|
Input Signal
|
0-2.5mV/V
|
|
Acquisition Rate
|
80 times/sec
|
|
Switch Output
|
2/4-way relay or OC output, relay contact AC 250V/1A, OC output drive 100mA/48V
|
|
Transmission output
|
4-20mA, 0-20mA, 0-5V, 0-10V, RS485, RS232
|
|
Bridge voltage
|
5V/100mA
|
|
Power supply
|
AC100~240V, 50~60HZ
|
|
Dimensions
|
152*72*50mm
|
|
Use environment
|
Temp：-20~50℃
Relative humidity: ≤85%RH Avoid strong corrosive gas |
Parameter Modification Key: In the standby state, long press this key for 3 seconds to enter the parameter modification interface.Calibration Key:In the standby state, long press this key for 3 seconds to enter the parameter calibration interface.Add Key: It is used to increase the value in the parameter state setting. Used to switch to view basic information in standby or measurement state.Shift Key/ Clear Key:In the parameter setting state, shift to select the value that needs to be modified. At this time, the selected data bit will flash. In the standby state or the measurement state, it is manual Zero.
Usually we will calibrate the indicator before shipment.
