케이센서스 스마트스토어
 |
Dimensions Unit: in mm
Hollow structure, alloy steel material. Low profile, strong shock resistance,good machining technics, strict production flow controlled. Used to control rolling force in metallurgy industry process control devices and other measuring equipment, as well as used in architecture industry.
Technical Parameter:
1.A ring-shaped column sensor is a device used to measure and monitor the axial preload of bolted connections.
2.It can be used to improve the reliability and safety of bolted connections, preventing bolts from loosening or becoming too tight.
3.It can reflect the contact interface stiffness and clamping force of bolted connections, and detect or quantify the tightening degree of bolts.
4. The inner hole size can be customized non-standard, and the elastomer is made of high-quality stainless steel material.
KWT1D52H is a big-range compact-design column load cell. It is made of 17-4PH material, and its rated range is 200kN. The sensor has a rasied surface radius to reduce the possibility of off-center load.
1. Super strong resistance for anti shock pressure;
2. Operating perfectly under 10m water;
3. Could work under harsh environment i.e. in dusty, sandy or icing environment;
4. Made of alloy steel, with reset function which enable the sensor to bear side impact;
5. Super stability on accuracy during long term operation;
6. User friendly, accuracy will not be affected in case that the product is installed with 5mm center deviation.
The KWT1C35 is a large-capacity, compact design pull-and-press column sensor with a special mounting end face design that enables the sensor to meet the tensile-compression direction loading during use. Using 17-4PH as raw material, rated capacity of 20kN, with high durability and excellent accuracy.
1. Alloy steel/Stainless steel;
2. High accuracy digital truck scales load cell with 1,000,000 counts
3.Suitable for electronic truck scale, track scale and other electronic weighing devices.
1.Made of stainless steel.
2.Laser welding sealing treatment, can be anti-oil, waterproof, anti-corrosive gases and media.
KWT1C80/130 series is a kind of column structure load cell, which both sides designed with double flanges to locating the position of mounting. The middle of load cell adopts through-hole design to meet the special requirements in the use process. This series has two size, the diameter of KWT1C80 is 80mm, the range is 25kN to 50kN, the KWT1C130 is 130mm and its range is 100kN. We also support customization on size and range as your needs.
Bolt preload force sensor is a device used to measure and monitor the axial preload force of bolted connections. It can be used to improve the reliability and safety of bolted connections, preventing bolts from loosening or becoming too tight. It can reflect the contact interface stiffness and clamping force of bolted connections, and detect or quantify the degree of bolt tightening. The inner hole size can be customized according to non-standard specifications.
Model 41 is a low profile “pancake” type load cells. These bonded foil, strain gage load cells are engineered to measure loads from 5 lb to 500,000 lb. The tension/ compression Model 41 is designed with the threaded hole running completely through the center of the cell. Model 41 utilizes two stabilizing diaphragms, which are welded to the sensing member to reduce off-center and side-loading effects. It provides high performance in non-linearity, hysteresis, and repeatability specifications for such applications as tube mills, extruding processes and weighing. Each unit has a welded construction and can be hermetically sealed for added durability. Model 41 load cells are available with optional 0 Vdc to 5 Vdc or 4 mA to 20 mA output.
