Hualanhai / CZL425-D / Column load cell

Expansion of column sensor，compared with 110E-JD, the material of shell and cover is stainless steel, and it is mechanically fastened to prevent disassembly. The installation height can reach 188 and 214 with additional indenter.

This weigh module has a rugged and compact design and an accuracy, which makes it especially suitable for load and level monitoring in storage tanks. The sensing element consists of three sections. The two outer sections constitute supports and rest on the built-in block, which is secured to the base. On the middle section, which is the loadsensing part, there is a yoke to which the leg of the tank is secured. The sensor is efficiently locked so that it cannot twist in the built-in block.

Expansion of column sensor，compared with 110E-JD, the material of shell and cover is stainless steel, and it is mechanically fastened to prevent disassembly. The installation height can reach 188 and 214 with additional indenter.

Expansion of column sensor，compared with 110E-JD, the material of shell and cover is stainless steel, and it is mechanically fastened to prevent disassembly. The installation height can reach 188 and 214 with additional indenter.

FA806 static load weighing module is based on the FA473 column load cell, with a range from 10t to 50t. It is characterized by its compact construction, which does not require the installation of additional accessories; the self-stabilizing load cell bearing head allows accurate and repeatable metering; quick and easy installation, saving installation and downtime for maintenance. The static load weighing module can be easily mounted on containers of various shapes and can be easily loaded, dosed, or mixed in this container.

Expansion of column sensor，compared with 110E-JD, the material of shell and cover is stainless steel, and it is mechanically fastened to prevent disassembly. The installation height can reach 188 and 214 with additional indenter.

Expansion of column sensor，compared with 110E-JD, the material of shell and cover is stainless steel, and it is mechanically fastened to prevent disassembly. The installation height can reach 188 and 214 with additional indenter.

50kN~3000kN IP67 Alloy Steel Or Stainless Steel Column Type Load Cell Weighing Sensor FA410 is a model of Column Type Load Cell, it is designed to measure load ranges from 50kN up to 3000kN. The material Alloy Steel or Stainless Steel can be customized, its cable size is 5.4x6000mm, it supports IP67.

Stainless steel column sensor with indenter, mounting height 200.

Column sensor basic model, with additional pressure head, the installation height can reach 188, 214.

50kN Or Customized Capacity 0.02%F.S. Or Customized Precision Column Type Load Cell FA120M is a model of Column Type Load Cell, it is designed to measure loads in compression with the 50kN or customized lighter or heavier capacity, it could be used stainless steel or others as its material, its non-linearity is 0.02%F.S. or customized.

The expanded column sensor has a reduced height compared to the 110E, but retains the additional ram and bottom mounting dimensions. The installation height can reach 158.