Wireless to 800m and Ideal for Outdoor Compression Measurement Applied Measurements wireless column load cell CCDDT24 is designed for general use in both laboratory environments and outside, thanks to its IP67 waterproof rating and rugged stainless steel construction. Ideal applications include hydraulic press calibration, pile force measurement, structural proof testing, jack force measurement and centre of gravity measurement. We can also supply specific centre of gravity software.
Screenshot of centre of gravity software racing car application.
Located within the semi-aromatic plastic wireless housing are the internal antenna and two standard AAA alkaline batteries. You can easily access the batteries by removing the telemetry housing cover while the internal electronics remain completely sealed. The wireless compression load cell CCDDT24 is supplied with a wireless handheld display T24-HS. The T24-HS is a 2 button, 1 channel, 8 digit LCD display. The wireless range is up to 800m clear line of sight. Alternatively, we can supply a T24-BSu USB wireless base station or our wireless USB dongle T24-BSd if a more compact base station is required. Capacities of 200te and over are supplied with welded carry handles as standard, included in the price. Optional welded carry handles are available for 50te and 100te only, if required. Customisation is available on the wireless column load cell, including ATEX intrinsically safe versions for hazardous environments and versions for use as calibration standards. Standard capacities for Applied Measurements wireless column load cell range from 50 tonnes up to 1000 tonnes, with higher capacity versions available on request. We can provide an optional loading cap and mounting base to ease installation and provide optimal performance from the load cell. Plus, carry handles are normally supplied on capacities over 200t to assist moving and installation.
Technical Specifications
Rated Load (tonne)
50, 100, 200, 300, 500, 750, 1000
Proof Load
150% of rated load
Ultimate Braking Load
>300% of rated load
Non-Linearity
<±0.25% of rated load (typically)
Non-Repeatability
<±0.05% of rated load
Transmission Distance
Up to 800 metres (clear line of sight)
Battery Life
>300 hours (continuous use, with 1.2Ah batteries)
Battery (standard)
AAA size Alkaline x2 (supplied with 1.2Ah batteries)
Operating Temperature Range
-20 to +55°C
Telemetry Housing
Polyamide Resin
Environmental Protection Level
IP67
Product Dimensions (mm)
Rating (tonnes)
H
ØB
ØD
T
S
R
Weight (kgs)
Resolution (tonnes)
50
103
50
88
M4
10
158
6.5
0.05
100
153
70
100
M5
12
150
11
0.1
200
180
78
125
M6
12
100
19
0.2
300
185
n/a
140
n/a
n/a
180
21
0.5
500
250
n/a
165
n/a
n/a
250
42
0.5
750
350
n/a
198
n/a
n/a
350
85
1
1000
400
n/a
276
n/a
n/a
400
220
1
Please note: dimensions may change for hazardous area versions.
SC4810은 대용량 압축 어플리케이션의 계량에 이상적인 캐니스터형 컬럼 로드셀입니다. 10톤부터 300톤까지 다양한 용량으로 제공됩니다. IP68 등급의 견고한 내구성을 갖추고 있어 열악한 환경에서도 사용 가능합니다.
The SC4810 is canister style column load cell ideal for weighing in large compressive applications. It is available in a wide variety of capacities from 10 Tonnes to 300 Tonnes. It is rugged and rated at IP68 for harsh environments.
15-100t IP68 Material Weighing Control For Large Tonnage Tank Applied Weighing Module FA812 is a model of our brand FIBOS FA8-Series, Weighing Module FA812 can be used to measure load ranges from 15t,20t,30t,50t to 100t capacity, it is easy to install and maintan, it supports bolt to avoid overturn, its spherical fittings keep the vertical weighing state.
KWT1C80/130 series is a kind of column structure load cell, which both sides designed with double flanges to locating the position of mounting. The middle of load cell adopts through-hole design to meet the special requirements in the use process. This series has two size, the diameter of KWT1C80 is 80mm, the range is 25kN to 50kN, the KWT1C130 is 130mm and its range is 100kN. We also support customization on size and range as your needs.
KWT1D52H is a big-range compact-design column load cell. It is made of 17-4PH material, and its rated range is 200kN. The sensor has a rasied surface radius to reduce the possibility of off-center load.
SC4818은 10톤에서 40톤까지의 압축 하중을 측정하도록 설계된 고하중 캐니스터형 로드셀입니다. 합금강 또는 스테인리스강으로 제작되어 혹독한 측정 환경에 적합하며 IP68 등급을 받았습니다.
The SC4818 is a heavy duty canister type load cell designed to measure compressive load in ranges from 10 Tonne to 40 Tonne. Built with either alloy steel or stainless steel it is suite for harsh measurement environments and is rated with an IP68 rating.
It should be widely used in auto press assembly, automated assembly, and 3C product testing;New energy product assembly, medical testing, robot, mold assembly;And other industrial test, measurement and system, easy to install.It can also be used in push and pull gauges, various industrial weighing systems, etc., with high dynamic response frequency.
The ZMZX1 is column type compression mounting kit. The load cell offers fast signalling times and optimal transparency in dosing and weighing processes. With an output signal of 2.0 mV/V, load levels of up to 100 t, accuracy classes up to C3 and high-quality alloy steel, it has a wide range of potential applications.
The KWT1C35 is a large-capacity, compact design pull-and-press column sensor with a special mounting end face design that enables the sensor to meet the tensile-compression direction loading during use. Using 17-4PH as raw material, rated capacity of 20kN, with high durability and excellent accuracy.
SC9N은 무거운 계량 어플리케이션에 이상적인 컬럼형 폼팩터로 제작된 압축 로드셀입니다. 5톤에서 30톤까지 다양한 용량으로 제공되며, 대칭형 폼팩터로 설치 및 장착이 간편합니다.
The SC9N is a compression load cell built in the a column style form factor ideal for heavy weighing applications. Available in capacities from 5 Tonnes to 30 Tonnes, its symmetric form factor allow for easy installation and mounting.
