In the field of vehicle safety, a crash wall integrated with Crash Wall Load cells is an essential equipment. Each Crash Wall Load cell measures forces in X, Y, Z directions during vehicle impact test.
Two types of crash wall load cells are available: standard and lightweight versions. The standard version has a sensor capacity of 300 or 400kN, for digital or analog output versions respectively. These can be used to configure a Full Width Rigid Barrier. The lightweight version has a capacity of 50kN and can be integrated into a Mobile Progressive Deformable Barrier.
M35XX is patented low-profile 6 axis force/torque load cell series, featuring extra thin profile, light weight, and high resolution. The thinnest model is 7.5mm., the thinnest commercially available. This series is popular in applications with very limited space like robotic prosthetics, biomechanics, humanoid robots, and etc.
Diameter: 30mm – 70mm
Capacity: 250 – 5000N
Non-linearity: 1%
Hysteresis: 1%
Crosstalk: 3%
Overload: 300%
Protection: IP60
Signals: Analog outputs (mv/V)
Decoupled method: Matrix decoupled
Material: Stainless steel
Calibration report: Provided
Cable: Included
M3612X series is a high-performance 6 axis force platform for motion analysis. Applying the same advanced strain gauge technology utilized in our 6 axis loadcells, SRI force platforms provide accurate measurements in all forces and moments from the test subject simultaneously.
M37XX series includes the smallest commercial 6 axis force/torque sensors in the world. It is designed for robotics, finger-force research, and general testing.
Diameter: 15mm – 135mm
Capacity: 50 – 6400N
Non-linearity: 0.5%
Hysteresis: 0.5%
Crosstalk: <2%
Overload: 300%
Protection: IP60; IP68
Signals: Analog outputs; Digital outputs
Decoupled method: Matrix-decoupled
Material: Stainless steel
Calibration report: Provided
Cable: Included
M38XX series features high resolution and high accuracy at low capacities. It is designed for applications that require high precision like assembly, products testing, drone testing and wind-tunnel testing.
Diameter: 45mm – 200mm
Capacity: 40 – 1040N
Non-linearity: 0.5%
Hysteresis: 0.5%
Crosstalk: <2%
Overload: 600%-1000%
Protection: IP60; IP65
Signals: Analog outputs
Decoupled method: Matrix-decoupled
Material: Stainless steel
Calibration report: Provided
Cable: Included
M39XX series features in high strength and large capacity up to 291600N. Many models in this series can be made to IP68 version for total protection against water ingress. It is designed for applications like robotic grinding and polishing, water research, biomechanics testing, product testing, and etc.
Diameter: 60mm – 135mm
Capacity: 5400 – 291600N
Non-linearity: 1%
Hysteresis: 1%
Crosstalk: 5%
Overload: 150%
Protection: IP60; IP68
Signals: Analog outputs
Decoupled method: Structurally decoupled
Material: Stainless steel
Calibration report: Provided
Cable: Included
The M43XX series is designed specifically for industrial robotic applications. The series provides a large range of force and torque capacities to select from. It has various versions for different requirements, for example, integrated low-noise amplifier version, integrated data acquisition system version, hollow and solid versions, IP64 and IP65 versions, and different communication interface versions.
Diameter: 60mm – 280mm
Capacity: 50 – 30000N
Non-linearity: 0.5%
Hysteresis: 0.5%
Crosstalk: <2.5%
Overload: 300%-1000%
Protection: IP60; IP64; IP65
Signals: Analog outputs; Digital outputs
Decoupled method: Specified in spec sheet
Material: Stainless steel
Calibration report: Provided
Cable: Included
The M43XX series is designed specifically for industrial robotic applications. The series provides a large range of force and torque capacities to select from. It has various versions for different requirements, for example, integrated low-noise amplifier version, integrated data acquisition system version, hollow and solid versions, IP64 and IP65 versions, and different communication interface versions.
Diameter: 60mm – 280mm
Capacity: 50 – 30000N
Non-linearity: 0.5%
Hysteresis: 0.5%
Crosstalk: <2.5%
Overload: 300%-1000%
Protection: IP60; IP64; IP65
Signals: Analog outputs; Digital outputs
Decoupled method: Specified in spec sheet
Material: Stainless steel
Calibration report: Provided
Cable: Included
- Multipurpose clevis pin load cell with extra robust electrical connectors
- Shock and vibration resistant
- All welded stainless steel construction
- Standard calibration is 5 points (0, 50%, 100%, 50%, 0) in both tension and compression
- Temperature effect on zero ±0.008% FSO/°F
- Temperature effect on span ±0.005% Reading/°F
- Zero balance ±1% FSO
Stellar Technology’s Series LDP990 load cells are designed specifically for applications where shear axles, shear pins, clevis pins, or pulley shafts are carrying the load. The load pins are great for real time force monitoring of loads that are carried using these devices.
The Series BEM980 load cells are high-accurate, low-profile force sensors for tension and compression applications. Constructed of stainless steel, these bonded foil strain gauged force sensors provide reliable performance for demanding applications. Features include shock and vibration protection.
- Miniature compression load cell
- Shock and vibration resistant
- All welded stainless steel construction
- 5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
- Temperature effect on zero ±0.005% FSO/°F
- Temperature effect on span ±0.005% Reading/°F
- Zero balance ±1% FSO
- High capacity miniature compression load cell
- Shock and vibration resistant
- All welded stainless steel construction
- 5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
- Temperature effect on zero ±0.005% FSO/°F
- Temperature effect on span ±0.005% Reading/°F
- Zero balance ±3% FSO
- Miniature tension and compression load cell
- Shock and vibration resistant
- All welded stainless steel construction
- Standard calibration (tension only) of 5 points (0, 50%, 100%, 50%, 0)
- Temperature effect on zero ±0.005% FSO/°F
- Temperature effect on span ±0.005% Reading/°F
- Zero balance ±3% FSO
These low profile load washers are our Series MIN845 compression load cells. Their thru-hole configurations are miniature, making them perfect for measuring tension on fasteners. Each unit is made from stainless-steel and comes available in a varied selection of special and standard inside and outside diameters.
- High accuracy precision miniature tension and compression load cell
- Shock and vibration resistant
- All welded stainless steel construction
- 5 point calibration record traceable to NIST (0, 50%, 100%, 50%, 0)
- Temperature effect on zero ±0.003% FSO/°F
- Temperature effect on span ±0.003% Reading/°F
- Zero balance ±1% FSO