Wireless to 800m and Ideal for Outdoor Compression Measurement Applied Measurements wireless column load cell CCDDT24 is designed for general use in both laboratory environments and outside, thanks to its IP67 waterproof rating and rugged stainless steel construction. Ideal applications include hydraulic press calibration, pile force measurement, structural proof testing, jack force measurement and centre of gravity measurement. We can also supply specific centre of gravity software.
Screenshot of centre of gravity software racing car application.
Located within the semi-aromatic plastic wireless housing are the internal antenna and two standard AAA alkaline batteries. You can easily access the batteries by removing the telemetry housing cover while the internal electronics remain completely sealed. The wireless compression load cell CCDDT24 is supplied with a wireless handheld display T24-HS. The T24-HS is a 2 button, 1 channel, 8 digit LCD display. The wireless range is up to 800m clear line of sight. Alternatively, we can supply a T24-BSu USB wireless base station or our wireless USB dongle T24-BSd if a more compact base station is required. Capacities of 200te and over are supplied with welded carry handles as standard, included in the price. Optional welded carry handles are available for 50te and 100te only, if required. Customisation is available on the wireless column load cell, including ATEX intrinsically safe versions for hazardous environments and versions for use as calibration standards. Standard capacities for Applied Measurements wireless column load cell range from 50 tonnes up to 1000 tonnes, with higher capacity versions available on request. We can provide an optional loading cap and mounting base to ease installation and provide optimal performance from the load cell. Plus, carry handles are normally supplied on capacities over 200t to assist moving and installation.
Technical Specifications
Rated Load (tonne)
50, 100, 200, 300, 500, 750, 1000
Proof Load
150% of rated load
Ultimate Braking Load
>300% of rated load
Non-Linearity
<±0.25% of rated load (typically)
Non-Repeatability
<±0.05% of rated load
Transmission Distance
Up to 800 metres (clear line of sight)
Battery Life
>300 hours (continuous use, with 1.2Ah batteries)
Battery (standard)
AAA size Alkaline x2 (supplied with 1.2Ah batteries)
Operating Temperature Range
-20 to +55°C
Telemetry Housing
Polyamide Resin
Environmental Protection Level
IP67
Product Dimensions (mm)
Rating (tonnes)
H
ØB
ØD
T
S
R
Weight (kgs)
Resolution (tonnes)
50
103
50
88
M4
10
158
6.5
0.05
100
153
70
100
M5
12
150
11
0.1
200
180
78
125
M6
12
100
19
0.2
300
185
n/a
140
n/a
n/a
180
21
0.5
500
250
n/a
165
n/a
n/a
250
42
0.5
750
350
n/a
198
n/a
n/a
350
85
1
1000
400
n/a
276
n/a
n/a
400
220
1
Please note: dimensions may change for hazardous area versions.
Column type load cell undertake special surface spraying and seal processing, can be used in harsh environment for a long time. Compression load cell can be applied for large platform scale, truck scale, rail weighbridge, and special for engineering force testing, overload safety testing and impact force measurement and control.
Bolt preload force sensor is a device used to measure and monitor the axial preload force of bolted connections. It can be used to improve the reliability and safety of bolted connections, preventing bolts from loosening or becoming too tight. It can reflect the contact interface stiffness and clamping force of bolted connections, and detect or quantify the degree of bolt tightening. The inner hole size can be customized according to non-standard specifications.
This product has a simple structural design and low cost. The design of its sealing membrane changes the cumbersome process of requiring a matching housing in the past, overcomes the defect of the housing of traditional sensors being easily damaged due to deformation, and greatly improves the sealing performance of the sensor. Compared with traditional column sensors, this type of sensor achieves relatively high accuracy in linearity, lateral resistance, torsion resistance, and azimuth error.
Traditional column sensors are widely used in various electronic weighing devices such as track scales, hopper scales, platform scales, etc.
Model 41 is a low profile “pancake” type load cells. These bonded foil, strain gage load cells are engineered to measure loads from 5 lb to 500,000 lb. The tension/ compression Model 41 is designed with the threaded hole running completely through the center of the cell. Model 41 utilizes two stabilizing diaphragms, which are welded to the sensing member to reduce off-center and side-loading effects. It provides high performance in non-linearity, hysteresis, and repeatability specifications for such applications as tube mills, extruding processes and weighing. Each unit has a welded construction and can be hermetically sealed for added durability. Model 41 load cells are available with optional 0 Vdc to 5 Vdc or 4 mA to 20 mA output.
The ZMZX1 is column type compression mounting kit. The load cell offers fast signalling times and optimal transparency in dosing and weighing processes. With an output signal of 2.0 mV/V, load levels of up to 100 t, accuracy classes up to C3 and high-quality alloy steel, it has a wide range of potential applications.
Widely used in auto press assembly, automated assembly, 3C product testing;
New energy product assembly, medical testing, robot, mold assembly and other industrial test, measurement and systems.
1.A ring-shaped column sensor is a device used to measure and monitor the axial preload of bolted connections.
2.It can be used to improve the reliability and safety of bolted connections, preventing bolts from loosening or becoming too tight.
3.It can reflect the contact interface stiffness and clamping force of bolted connections, and detect or quantify the tightening degree of bolts.
4. The inner hole size can be customized non-standard, and the elastomer is made of high-quality stainless steel material.
SC9N은 무거운 계량 어플리케이션에 이상적인 컬럼형 폼팩터로 제작된 압축 로드셀입니다. 5톤에서 30톤까지 다양한 용량으로 제공되며, 대칭형 폼팩터로 설치 및 장착이 간편합니다.
The SC9N is a compression load cell built in the a column style form factor ideal for heavy weighing applications. Available in capacities from 5 Tonnes to 30 Tonnes, its symmetric form factor allow for easy installation and mounting.
This product is made of high-quality alloy steel, offering excellent stability and resistance to signal interference. It can be installed in confined spaces and customized to specific requirements, making it widely used for pressure and force measurement in various industrial applications.
This product is simple in structure design and low in cost. The design of its sealing diaphragm changes the complicated process of matching the shell in the past, overcomes the defect that the shell of the traditional sensor is easy to be damaged due to deformation, and greatly improves the sealing performance of the sensor. Compared with the traditional column sensor, the sensor with this structure has higher accuracy in linearity, lateral resistance, torsion resistance and azimuth error.
This small size is suitable for the production and testing of 3C digital products. Traditional column sensors are widely used in various electronic weighing equipment such as track scales, hopper scales and platform scales.
