TS70 Static torque Sensor
Technical parameters
| Category | Parameter | Value / Unit |
|---|---|---|
| Capacity | Range (Nm) | 2, 5, 10 |
| Mechanical | ||
| Calibration Mode | Torque (扭力) | |
| Material | Stainless Steel (不锈钢) | |
| Safe Overload | 200 %FS | |
| Ultimate Overload | 300 %FS | |
| Rated Torsional Angle @ FS | 0.1 ° | |
| Electrical | ||
| Sensitivity Output | 0.4 mV/V | |
| Zero Balance | ± 10 % | |
| Excitation Voltage | 10 VDC MAX | |
| Input Resistance | 700 ± 30 Ohm | |
| Output Resistance | 700 ± 2.5 Ohm | |
| Insulation Resistance | > 5 x 10⁹ Ohm | |
| Cable Length | 2 m | |
| Accuracy Class | ( MAX ERROR ) | |
| Combined Accuracy | 0.1 % | |
| Non-linearity | 0.1 %FS | |
| Hysteresis | 0.1 %FS | |
| Temp. Effect on Zero | 0.05 %RO/K — MAX | |
| Temp. Effect on Sensitivity | 0.05 %RO/K — MAX | |
| Creep (in 30 min) | 0.1 %FS | |
| Temperature | ||
| Compensated Temp. Range | -20 to +60 °C | |
| Operating Temp. Range | -20 to +70 °C | |
| IP Protection Rating | IP66 |
Dimensions
