UTILCELL / SL604 Slip Ring Rotary Torque Sensor
NS / NS-NJ15 series dynamic torque sensor
Category: Tag: Brand:

UTILCELL / SL603 Non-Contact Dynamic Torque Sensor

Dynamic Rotary Torque Sensor

Capacity: 5,10,20,50,100,200,500N.m

Category: Dynamic Rotary Torque Sensor

Add to Wishlist
Share it:

SL603 Non-Contact Dynamic Torque Sensor

SL603.JPG

Product Features

It can measure both static torque and rotating torque;
Both static torque and dynamic torque can be measured;
High detection accuracy, good stability; strong anti-interference;
Small size, light weight, various installation structures, easy to install and use;
Continuous measurement of forward and reverse torque without repeated zero adjustment;
There are no wearing parts such as conductive rings, and it can run at high speed for a long time;
The high-level frequency signal output by the sensor can be directly sent to the computer for processing;
Measure the strength of the elastic body and can withstand 100% overload

Technical Specifications

Specification Technical specifications
Capacity 5,10,20,30,50,100,200,300,500N.m
Torque output 0±5/10VDC，0~5/10VDC，10±5KHZ，4~20mA，RS485/RS232
Accuracy – % FS ±0.1,0.2
Electricity supply 12-30VDC
Zero point temperature effect – %RO/°C ±0.02
Range temperature influence-%RO/℃
 ±0.02
Compensation temperature range-℃ -10~+60
Operating temperature℃ -20~80
Electrical connection 6-pin or 8-pin
Safe Overload -% RO 150
Insulation resistance ≥2000MΩ(100VDC)
Frequency Response 200Hz
Standard cable length
5m(need to be extended when ordering instructions)

Product Dimensions

Installation size

SL603-1.JPG

Load Direction

SL603-2.JPG

Accurate measurement with matching display

The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.

 

Related Products