UT419 Stainless Steel Pillar Load Cell
 |
Product FeaturesSL404 column tension compression force sensor |
Technical Specifications
| Specification | Technical Indicators |
| Capacity | 20,50,100,200,500,100
0,2000N |
| Rated Output | 2.0±1%mV/V |
| Zero Balance | ±2%mV/V |
| Creep | ≤0.05%F.S. |
| Non-Linearity | ≤0.05%F.S. |
| Hysteresis | ≤0.05%F.S. |
| Repeatability | ≤0.05%F.S. |
| Input Impedance | 650/350±5Ω |
| Output Impedance | 650/350±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ |
| Insulation Resistance | ≥5000MΩ/100V(DC) |
| Reconnended Excitation | 5~12V |
| Maximum Excitation | 15V |
| Conpensated Temp Range | -10~60℃ |
| Operating Temp Range | -20~80℃ |
| Safe Overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Cable Size | φ3X3000mm |
| Weight | 0.2kg |
| Material | Stainless steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
