Honeywell Model 34 Precision Miniature Load Cell
Honeywell / Model 34 / Precision Miniature Load Cell
Model 34 precision miniature load cells measure both tension and compression load forces of 1000 g to 1000 lb. These models are our highest accuracy, rugged miniature load cells. Model 34’s welded, stainless steel construction is designed to eliminate or reduce to a minimum, the effects of off-axis loads. (The internal construction assures excellent long-term stability for ranges 1000 grams and above.) A modification permits this model to be completely welded for underwater applications. The Model 34 tension/compression load cell has female threads attachments. High accuracies of 0.15 % to 0.25 % full scale are achieved. Each bonded strain gage unit is built of welded 17-4 PH stainless steel for additional ruggedness. All load cells with ranges from 1 kg to 10 lb have an electrical balance module in the lead wire (approximately 1 in x .087 in thick). This balance module does not have to be the same temperature as the transducer.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.
This Miniature force sensor is a mini button load cell which is designed to measure load ranges up to 500N, the miniature size makes this product well suited for use in space-constrained environments for weight measurement.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.
5-50kg Stainless Steel Miniature Force Sensor FA103 is a model of our brand FIBOS FA1-Series, Miniature Force Sensor FA103 can be used to measure force 5kg,10kg,20kg and 50kg capacity, its Cable size is ⌀1.2x3000mm, its Weight is 0.1kg, and its Material is Stainless steel, its Creep(30min) and Non-linearity both ≤0.5%F.S..
5-100kg Stainless Steel Miniature Force Sensor FA104 is a model of our brand FIBOS FA1-Series, Miniature Force Transducer FA104 can be used to measure force ranges from 5kg,10kg,20kg,30kg up to 100kg capacity, its Creep(30min),Non-linearity,Hysteresis and Repeatability all ≤0.5%F.S., its Weight is 0.1kg.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.
50,100,200,500,800kg Or Customized Spoke Type Load Cell FA127D belongs to FA127 which is in Spoke Type Load Cell category of our brand FIBOS FA1-Series, Spoke Type Load Cell FA127D can be used to measure load 50kg,100kg,200kg,500kg and 800kg or customized capacity, its Creep(30min) ≤0.032%F.S. or can be customized, its Non-linearity and Repeatability both ≤0.035%F.S. or also can be customized, and its Hysteresis ≤0.038%F.S. or can also be customized.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.
The elastomer of sensor is made of aluminum alloy, sealed by glue, colorless anodized on the surface. The protection rating reaches IP65.