SOP / KTC / 선형 위치 포텐셔미터 변위 센서

Supply Voltage: 220V AC:220V±10%, Power < 7w; 24V DC:24V±10%, Power < 5w;12V DC:9V~20V, Power < 5w; Other specifications are subject to the instruction attached
Operating Temperature: 0~50℃, humidity < 90%R.H
Display range: -1999~9999, Decimal point position can be set
Display color: The measured value is green, the set value is red, the light column is red or customized
Display resolution: 1/10000
Input Signal: Voltage, Current, RTD, T/C, mV, potentiometer, Pressure Gauges with Resistance Transmitter
Voltage: 1V~5V DC,0V~5V DC, Can be selected by setting
Current: 4mA~20mA,0mA~10mA,0mA~20mA, Can be selected by setting
RTD: Pt100,Cu100,Cu50,BA1,BA2,G53, Can be selected by setting
T/C: K, S, R, B, N, E, J, T, Can be selected by setting
please leave a message for special request
Intrinsic Error: < ±0.2%F.S
Measuring resolution: 1/60000, 16-bit A/D converter
Measurement control cycle: 0.2s

KPM Series of linear potentiometer transducer are used to used to measure and track the linear motion or position of a target. They are designed to withstand the harsh environment of motorsport and automotive testing, structural and architectural testing, and robotics applications.

KTF Slide type position tracking sensor is designed for most common occasions, especially for the places where the direction of length is limited and self-align is difficult. It is a high precision linear position transducer with a long lasting conductive track.

1. Spherical hinge could avoid lateral force
2. Usage life is longer, times could reach thirty million
3. Suitable for small space applications
4. Resolution rate is higher than 0.01mm
5. High speed
6. Din43650 standard plug and socket
7. Protection grade is IP65 (install down is IP57)
8. Could quip with voltage and current(2 line, 3line) module

1. Travel 10-100000mm customiable
2. High stablitily,high accuracy,service life up to Five million times
3. Permissible Deviation 3, not exceeding 35mm
4. For every 1000mm,the linear accuracy can reach to 0.05%-0.08%
5. Protection Level IP65

KPM Series of linear potentiometer transducer are used to used to measure and track the linear motion or position of a target. They are designed to withstand the harsh environment of motorsport and automotive testing, structural and architectural testing, and robotics applications.

KPM Series of linear potentiometer transducer are used to used to measure and track the linear motion or position of a target. They are designed to withstand the harsh environment of motorsport and automotive testing, structural and architectural testing, and robotics applications.

KTM pulling rod type displacement measurement transducer with conductive plastic element are designed for the displacement or length measurement and are available in different stroke lengths up to 300 mm.

1. Measurement range：0-300mm
2. Output Signal: Resistance :5k; Current :4-20mA; Voltage : 0-5V/0-10V; Digital RS485
3. Linearity : ±%0.05
4. IP Degree: IP68
5. Displacement Speed: < 5m/s
6. Shell Size: φ28mm
7. Mechanical Installation: 1.Fisheye installation at both ends; 2.Threaded installation of flanges at both ends

1. Travel 10-100000mm customiable
2. High stablitily,high accuracy,service life up to Five million times
3. Permissible Deviation 3, not exceeding 35mm
4. For every 1000mm,the linear accuracy can reach to 0.05%-0.08%
5. Protection Level IP65

CE Approved KPM Linear Sensor Supplier from China The KPM Linear Sensor are used to used to measure and track the linear motion or position of a target. They are designed to withstand the harsh environment of motorsport and automotive testing, structural and architectural testing, and robotics…

1. No Pole Design
2. Spherical Hinge Could avoid Lateral Force
3. Usage life is longer, Times could reach Thirty Million
4. Non-linearity Smaller
5. Resolution rate is higher than 0.01
6. High speed
7. Din43650 Standard Plug and socket
8. Protection Grade is IP65(Install Down is IP57)
9. Could Equip with voltage and current (2 line,3line) Module