Parallel output high-precision photoelectric single-turn absolute encoder GDS60 series
Specifications
| Mechanical parameters | Electrical parameters | ||
| maximum speed | 6000 rpm | Operating Voltage | 10-30Vdc (5Vdc can be customized) |
| Spindle load | Axial 40N, Radial 100N | current consumption | < 300mA (24Vdc) no load |
| impact resistance | 1000m/s²(6ms), equal to 100g | output signal | 18-bit synchronous parallel signal (pure binary, Gray code) |
| Anti-vibration | 200m/s²(10-2000Hz), equal to 20g | Linear resolution | 1/262144FS |
| Allow axial play | ±1.5mm | IP Class | IP65 or 68 |
| Allow radial runout | ±0.2mm | positioning accuracy | 0.01º |
| external structure | 60mm OD, solid shaft, blind hole shaft | Operating temperature | -40℃~85℃ |
| Connection Type | 30 core shielded cable or aviation plug | Storage temperature | -40℃~85℃ |
| reliable and patented
l Strong bearing structure with Safety-Lock TM design, which can provide higher vibration resistance and installation error resistance l IP68 protection grade and wide operating temperature range -40℃…+85℃ l Patented mechanical gear technology, with permanent power-off memory function |
performance optimization
l High precision, data refresh rate of location data ≤ 4us l Direct reading through I/O port l International standard SSI signal format |
Wiring diagram
| Black/1 | 20 | orange/3 | 28 | Ash/3 | 216 | brown/3 | 224 | Note:
1. Parallel output reference voltage, voltage drop of <2V per bit is normal. Please use short-circuit with the positive (brown) power supply. 2. Set: connect to 24V + 1 second to set the current value to zero. 3. Forward and reverse: counterclockwise data increase when connected to 24V+ 4. Parallel output maximum 50mA per bit 5 Active high. |
| Black/2 | 21 | Purple/1 | 29 | blue/2 | 217 | |||
| Black/3 | 22 | Purple/2 | 210 | blue/3 | 218 | |||
| Green/1 | 23 | Purple/3 | 211 | Red/2 | 219 | Red/1 | KVCC
Note 1 |
|
| Green/2 | 24 | yellow/1 | 212 | Red/3 | 220 | Ash/1 | Set Note 2 | |
| Green/3 | 25 | yellow/2 | 213 | white/2 | 221 | Brown/1 | 10-30Vdc | |
| Orange/1 | 26 | yellow/3 | 214 | white/3 | 222 | white/1 | GND 0V | |
| Orange/2 | 27 | Ash/2 | 215 | brown/2 | 223 | blue/1 | Forward and reverse Note 3 |
Mechanical dimension drawing
Clamping synchro flange (optional for cable output or plug output)
Synchronous flange/servo flange (cable output or plug output optional)
Blind Hole/Half Through Hole Flange (Cable output or plug output optional)
output signal
The output is a parallel push-pull output signal, which is connected to the input module (I/O) of the PLC as shown in the figure below:
