S beam load cell-AT71A
Description
1.Aluminium alloy structure
2. Full bridge structure
3. Mainly used for hanging scale, Fitness Sensor, hook Scale, tensile testing etc
Drawing
Contact us if you need the Datasheet PDF.
이 제품은 인장력과 압축력을 모두 측정할 수 있는 고정밀 센서로, 구조가 작고 안정성이 뛰어나며, 다양한 산업 및 시험 장비에 적합합니다.
이 제품은 스테인리스 소재로 제작된 고정밀 인장·압축 겸용 센서로, 다양한 산업 및 자동화 시험 장비에 적합한 고안정성 센서입니다.
5,10,20,50,100,200N Or Customized S type Load Cell FA301 is a model of our brand FIBOS FA3-Series, S type Load Cell FA301 can be used to measure force 5N,10N,20N,50N,100N,200N or customized capacity, its material we use Stainless steel, we can also customized material.
S형 로드셀은 인장 및 압축 겸용 센서입니다. STP는 알루미늄 합금으로 제작되고 표면 양극 산화 처리 및 접착 밀봉 공정을 거쳐 소형, 경량, 좁은 측정 범위(2kg~50kg)를 제공하며, 단일 트랜스미터와 함께 사용하여 인장 및 압력 테스트(인장 게이지 등)에 사용할 수 있습니다.
이 센서는 인장과 압축 양방향 하중을 측정할 수 있으며, 높은 정밀도와 안정성을 제공하고, 다양한 산업용 자동화 및 시험 장비에 적합한 구조적 특징을 가지고 있습니다.
Product description:
LP510S is special double ended shear beam load cell, its sharp is pin, it is with throughout-hole to accommodate strain gauge, instead of typical side 4pcs cavities, which improve sealing performance significantly, not easy damaged in harsh environment.
Main Features:
• Material: Stainless steel
• Rated Capacities: 25KN~90KN
• Through-hole to accommodate strain gauge
• IP Rating: IP69K
• Suitable for force measurement device and safety controlling against overload
• Excellent sealing performance
Category: Others
LCT S-type Load Cells have been designed for measuring static and dynamic tensile and compressive forces.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-AX1 load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-AX1 load cells can be used to measure loads range from 10kg to 100kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 2mV/V output signal.
LAS-AX1 load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.
The S beam load cell provides good restraint to possible movement of the automation and in many cases. The small size gives excellent performance for high capacity loading. The output is rationalized to facilitate multiple-cell application. ZMSA is contructed of stainless steel and is potted to IP67 providing excellent protection against moisture and humidity.
Features:
Capacity 1kg-100kg
Both tension and compression
Rational outputs
Stainless steel
Optional features:
Hermetically sealed available
50-2000N Stainless Steel S Beam Load Cell FA303 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA303 can be used to measure load 50N,100N,200N,500N,1000N and 2000N capacity, its Weight is 0.2kg and material is Stainless steel, its Rated output range is 2.0±10%mV/V, its Zero Balance range is ±0.05mV/V.
이 제품은 인장과 압축을 모두 측정할 수 있는 고정밀 센서로, 구조가 컴팩트하며 장기적인 안정성이 뛰어납니다. 다양한 시험기 및 자동화 시스템에서 광범위하게 활용됩니다.
LCT S-type Load Cells have been designed for measuring static and dynamic tensile and compressive forces.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-AX load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-AX load cells can be used to measure loads range from 2kg to 50kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 1mV/V output signal.
LAS-AX load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.
- Capability: 0.1~20 kN
- Comprehensive precision: 0.5%FS
- Sensitivity: 1.0~1.5 mV/V
- Creep: ±0.05%FS/30min