S beam load cell-AT52J
Description
AT52J S beam load cell is Aluminum alloy material, Mainly used for crane scale, hopper scale, tensile testing etc.
Drawing
Contact us if you need the Datasheet PDF.
AMOWELLSENSOR / S beam load cell-AT52J
AT52J S beam load cell is Aluminum alloy material, Mainly used for crane scale, hopper scale, tensile testing etc.
| Capacity | 50,100,200,500kg |
|---|---|
| Accuracy | ±0.05%F.S |
| Certificate | RoHS, CE |
| Creep | ±0.05%F.S/30min |
| Model | AT52J |
| Material | Aluminum alloy |
| Sensitivity | 2.0±5%mV/V |
| Size | 50.8*76.2*18mm |
10-500N Stainless Steel Tension Compression Force Sensor FA306 is a model of our brand FIBOS FA3-Series, Tension Compression Force Sensor FA306 can be used to measure tension and compression force 10N,20N,50N,100N,150N,200N and 500N capacity, its Rated output range is 2.0±10%mV/V, and its Zero Balance range is ±2%F.S..
Product description:
S515 is a square-shaped tension & compression load cell, high-quality silica gel potting is to ensure it can work in harsh environment. Available in a wide range of capacities from 1KN to 10KN
Main Features:
• Material: Alloy steel ( thread)
• Rated Capacity: 1KN~10KN
• Calibrated based on criterion of ISO 376
• IP Rating: IP66
• Suitable for force measurement and overloading safety controlling.
• High precision by ISO 376 class 0.5, 1, 2.
Category: Tension
5,10,20,50,100,200N Or Customized S type Load Cell FA301 is a model of our brand FIBOS FA3-Series, S type Load Cell FA301 can be used to measure force 5N,10N,20N,50N,100N,200N or customized capacity, its material we use Stainless steel, we can also customized material.
Product description:
LP510S is special double ended shear beam load cell, its sharp is pin, it is with throughout-hole to accommodate strain gauge, instead of typical side 4pcs cavities, which improve sealing performance significantly, not easy damaged in harsh environment.
Main Features:
• Material: Stainless steel
• Rated Capacities: 25KN~90KN
• Through-hole to accommodate strain gauge
• IP Rating: IP69K
• Suitable for force measurement device and safety controlling against overload
• Excellent sealing performance
Category: Others
The ZMSSA S type load cell provides good restraint to possible movement of the automation and in many cases. The small size gives excellent performance for high capacity loading. The output is rationalized to facilitate multiple-cell application. ZMSSA is contructed of stainless steel and is potted to IP67 providing excellent protection against moisture and humidity.
Features:
Capacity 5kg-200kg
Both tension and compression
Rational outputs
Stainless steel
Optional features:
Hermetically sealed available
이 센서는 인장 및 압축 양방향 하중을 정밀하게 측정할 수 있는 컴팩트한 구조로, 높은 정밀도와 안정성을 제공하며 다양한 산업용 측정 장비와 자동화 시스템에 적합합니다.
이 센서는 인장과 압축 양방향 하중을 측정할 수 있으며, 높은 정밀도와 안정성을 제공하고, 다양한 산업용 자동화 및 시험 장비에 적합한 구조적 특징을 가지고 있습니다.
LCT S-type Load Cells have been designed for measuring static and dynamic tensile and compressive forces.
Advantages of LCT S-type Load Cells:
Quick to install thanks to off-center load compensation at the factory (per OIML R60),and you benefit from a new generation of high-precision, S-type load cells. Be it force measurement in machines, test benches and production lines or tests in development: LCT S-type load cells are the reliable and safe choice for precise force measurement – providing compelling benefits for you.
Model LAS-AX1 load cells are designed to this “S-type”and manufactured from high quality aluminum alloy of aviation standard. LAS-AX1 load cells can be used to measure loads range from 10kg to 100kg with the measuring accuracy of 0.05% R.O.( R.O.=Rated Output) and 2mV/V output signal.
LAS-AX1 load cells are mainly used for crane scales,hopper scales,tensile testing,test benches and machine testing.
이 센서는 인장과 압축력을 모두 측정할 수 있으며, 정밀도와 안정성이 뛰어나 다양한 산업용 계측 장비에 폭넓게 활용됩니다.
50,100,200,500,1000,2000kg Or Customized S Beam Load Cell FA310 is a model of our brand FIBOS FA3-Series, S Beam Load Cell FA310 can be used to measure load 50kg,100kg,200kg,500kg,1000kg and 2000kg or customized capacity, its Creep(30min),Hysteresis and Repeatability all ≤0.025%F.S. or can be customized, and its Non-linearity ≤0.03%F.S. or can also be customized.
The S beam load cell provides good restraint to possible movement of the automation and in many cases. The small size gives excellent performance for high capacity loading. The output is rationalized to facilitate multiple-cell application. ZMSA is contructed of stainless steel and is potted to IP67 providing excellent protection against moisture and humidity.
Features:
Capacity 1kg-100kg
Both tension and compression
Rational outputs
Stainless steel
Optional features:
Hermetically sealed available
1.Alloy steel construction;
2.With glue sealing and nickel plated surface, the product is waterproof and anti-corrosion, could work for various applications;
3.Suitable for electronic hanging scales, hopper scales, tension or compression measuring application and other electronic weighing devices.