BRG 701-10 Cable Tension Sensor
Description
Product Introduction
A tension sensor is a device used to measure the tension of linear materials such as ropes, cables, chains, etc. It converts tension into electrical signals for easy monitoring and control.
Features:
- The raw materials are 17-4 stainless steel or alloy steel;
- Small size and easy to install;
- Mainly used in the medical machinery industry, electronic material pin bending test, wire tension detection control system;
- Adapt to harsh environments, with waterproof, dustproof, corrosion-resistant and other characteristics;
- High precision: can accurately measure tiny tension changes.
Technical Parameters
| capacity | 1N-10N |
| Accuracy class | 0.1% F.S. |
| Rated output | 2.0±0.2mv/v |
| Zero balance | ±2%F.S. |
| Non-linearity | ±0.05%F.S. |
| hysteresis | ±0.05%F.S. |
| Repeatability | ±0.05%F.S. |
| Creep (30min) | ±0.05%F.S. |
| Temp. effect on output | ±0.1%F.S. / 10 °C |
| Temp.effect on zero | ±0.1%F.S. / 10 °C |
| Input resistance | 350 ± 10 Ω |
| Output resistacne | 350 ± 5 Ω |
| Insulation | ≥5000MΩ(50VDC) |
| Recommended excitation | 5~10VDC |
| Maximum excitation | 15VDC |
| Compensated temp. range | -10~40°C |
| Operation temp. range | -20~60°C |
| Safe overload | 120 %F.S. |
| Ultimate overload | 150 %F.S. |
| Cable size | Φ 2.0x3m |
| Protection class | IP65 |
Dimension (mm)
Load Direction
