BRG-ZL104 Cable/ Steel Wire Tension Load Cell
Description
Product Description
A cable or steel wire tension load cell is a type of force sensor specifically designed to measure the tension force in cables, ropes, or steel wire ropes.
It is widely used in the lifting, water conservancy, mining industries and various types of wire rope tension measurement or long-term monitoring and use in various tensile testing industries.
Technical Parameters
| Rated quantitative schedule | KN | 1-200 |
| Output sensitivity | mV/V | 1.5±0.05 |
| Zero point output | %F.S. | ±1 |
| Non-linear | %F.S. | 0.5 |
| lag | %F.S. | 0.5 |
| Repeatability | %F.S. | 0.3 |
| Creep (30 min) | %F.S. | 0.3 |
| Temperature sensitivity drift | %F.S./10℃ | 0.05 |
| Zero temperature drift | %F.S./10℃ | 0.05 |
| Response frequency | Hz | 1k |
| Material | 42CrMoA | |
| impedance | Ω | 350 |
| Insulation resistance | MΩ/100V DC | ≥5000 |
| Use voltage | V | 10-15 |
| Operating temperature range | ℃ | -20-80 |
| Safety overload | %R.C. | 150 |
| Extreme overload | %R.C. | 300 |
| Cable line specifications | m | Φ5*3m |
| Cable limit pull force | N | 98 |
| TEDS | selectable | |
Dimension (mm)
| Steel wire rope tension | Range | wirerope diameter | A | B | C | D |
| 10kN | 1t | Φ6-14 | 160 | 76 | 117 | 45 |
| 20kN | 1t | Φ10-18 | 160 | 76 | 117 | 45 |
| 50kN | 5-10t | Φ16-26 | 160 | 76 | 117 | 45 |
| 100-200kN | 10t-14t | Φ24-36 | 260 | 108 | 170 | 68 |
Force Diagram
