SL509 Weighing Cantilever Beam Load Cell
 |
Product FeaturesAfter the elastic body of the FA509 shear beam sensor is stressed, what needs to be measured is not its normal stress, but the shear stress caused by the shear force, and the output signal is not affected by the position change of the force measuring point. Good linearity and high precision. The tensile and compressive output sensitivities of the sensor are basically the same, so it is especially suitable for measuring the objects of tension and compression at the same time. Simple structure, easy sealing, good long-term stability and durability. |
Technical Specifications
| Specification | Technique | Technical Indicators |
| Capacity | 50, 100, 200, 500, 1000N | 0.22,0.55,1.1,1.76,
2.2,4.4t |
| Rated Output | 1.0±20%mV/V | 1.94±0.1%mV/V |
| Zero Balance | ±1%F.S. | ±2%mV/V |
| Creep | ≤0.5%F.S. | ≤0.0166%F.S. |
| Non-Linearity | ≤0.5%F.S. | ≤0.017%F.S. |
| Hysteresis | ≤0.5%F.S. | ≤0.017%F.S. |
| Repeatability | ≤0.5%F.S. | ≤0.017%F.S. |
| Input Inpedance | 600~800Ω | 390±3Ω |
| Output Inpedance | 600~800Ω | 350±5Ω |
| Temp. effect on output | 0.05%F.S./10℃ | 0.014%F.S./10℃ |
| Temp. effect on zero | 0.05%F.S./10℃ | 0.012%F.S./10℃ |
| Insulation Inpendance | ≥5000MΩ/100V(DC) | ≥5000MΩ/100V(DC) |
| Reconnended Excitation | 5~10V | 5~12V |
| Maximum Excitation | 15V | 15V |
| Conpensated Temp Range | -10~60℃ | -10~60℃ |
| Operating Temp Range | -20~80℃ | -20~80℃ |
| Safe Overload | 150% F.S. | 150% F.S. |
| Ultimate Overload | 200% F.S. | 200% F.S. |
| Cable Size | φ5.4X1.5m | |
| Material | Stainless steel |
Product Dimensions
Installation size
Load Direction
Wiring Diagram
Accurate measurement with matching display
The output of the force measuring and weighing sensor itself is an MV signal, which needs to be amplified and convertedto display numerical values or output signals to the upper computer, PLC, etc.
