TAS3FM TRIAXIAL FORCE TRANSDUCER
INTRODUCTION:
HT SENSOR / TAS3FM / TRIAXIAL FORCE TRANSDUCER
Product description:
Capacity ：1~50N.m, 50~·000N
Type: torque and compression /Tension force sensor
A torque-compression sensor is a type of sensor capable of measuring both compression and torque force simultaneously. It can be used to measure the feed force and torque during processes such as drilling, cutting, and screw tightening, or to measure the torsional characteristics of components like springs, bearings, and clutches
-
설명
- |
-
Download as PDF
- |
F-XYZ 500N M-XYZ 12Nm Aviation Plug Stainless Steel Six Axis Force Sensor FARS53 is a model of our brand FIBOS FARS-Series, it can be used to measure 6 axis force Fx,Fy and Fz are 500N, Mx,My and Mz are 12N.m, FARS53 its plug is Aviation plug and its material is Stainless steel, just like our other six-axis force sensors, it can centainly be used to measure both force and torque.
XYZ 50-300kg Stainless Steel 3 Axis Force Sensor FA728 is a model of our brand FIBOS FA7-Series, 3 Axis Force Sensor FA728 can be used to measure 3-axis force, its X axis,Y axis,Z axis force ranges the same from 50kg up to 300kg capacity, its Rated output range is 1.0±10%mV/V, and its Zero Balance range is ±1%mV/V.
Fx Fy 500N Fz 700N Mx My Mz 18Nm Hard Aluminum Alloy Six Axis Force Sensor FARS82D is a model from FARS82 which belongs to our brand FIBOS FARS-Series, FARS82D can be used to measure six axis force Fx,Fy are both 500N, Fz is 700N, and Mx,My,Mz are all 18Nm, its weight is 0.36kg, it’s heavier than FARS82.
XYZ 10-50kg3 Stainless Steel 3 Axis Force Sensor FA742 is a model of our brand FIBOS FA7-Series, 3 Axis Force Sensor FA742 can be used to measure 3-axis force, its X axis,Y axis,Z axis force range are the same 10kg,20kg,30kg and 50kg capacity, its Creep(30min),Non-linearity and Repeatability all ≤0.1%F.S., its Hysteresis ≤0.2%F.S..
XYZ 50N 100N 200N 500N 1000N 2000N 5000N IP66 3 Axis Force Sensor FA704 is a model of our brand FIBOS FA7-Series, 3 Axis Force Sensor FA704 can be used to measure 3 axis force, its X axis, Y axis and Z axis force range are all the same 50N,100N,200N,500N,1000N,2000N and 5000N capacity, its Rated output is 1.0mV/V, its Zero Balance range is ±2%F.S..
Fx Fy Fz Each 80N Mx My Mz Each 3Nm 0.1%F.S. IP64 Hard Aluminum Alloy Six Axis Force Sensor FARS36C is a model of our brand FIBOS FARS-Series, it belongs to FARS36 which is in our six axis force category. FARS36C can be used to measure 6-axis force Fx,Fy and Fz are same 80N, Mx,My and Mz are all the same 3Nm.
Fx Fy Fz Each 50N Mx My Mz Each 2Nm 0.1%F.S. IP64 Hard Aluminum Alloy Six Axis Force Sensor FARS46A is a model of FARS46 which belongs to our brand FIBOS FARS-Series. FARS46A can measure six-axis load Fx,Fy and Fz are 50N, Mx,My and Mz are the same 2Nm, its Diameter is 46mm and Height is 19.4mm, its weight is 0.06kg.
Fx Fy Fz Each 30N Mx My Mz Each 1.5Nm 0.1%F.S. IP64 Hard Aluminum Alloy Six Axis Force Sensor FARS36A is a model from FARS36 which is in six-axis force sensor category. FARS36A can measure 6-axis force Fx,Fy and Fz are 30N, Mx,My and Mz are 1.5Nm, its Diameter is 36mm and Height is 20mm, its weight is 0.04kg.
Suitable for the measurement of multi-directional forces in robot arms, robots, aircraft, medical technology, shipbuilding, etc.
Fx Fy Fz Each 150N Mx My Mz Each 5Nm 0.1%F.S. IP64 Hard Aluminum Alloy Six Axis Force Sensor FARS46B is a model of our brand FIBOS FARS-Series, it belongs to FARS46. FARS46B can be used to measure multi-axis force Fx,Fy and Fz are the same 150N, Mx,My and Mz are all 5Nm, its Diameter is 46mm and Height is 19.4mm, its weight is 0.05kg.
Fibos force sensor multiple range load cell FA704C can measure forces in three vertical axes at the same time. The 3-axis load cell is available in a capacity range from 50N to 5000N for all three axes. The three-dimensional force sensor is based on the strain transducer and adopts the resistance strain transducer principle. The 30mm height of this multi-axis load cell allows it to be used in many situations
Fx Fy 500N Fz 700N Mx My Mz 18Nm Hard Aluminum Alloy Six Axis Force Sensor FARS75D is a model of our brand FIBOS FARS-Series, it belongs to FARS75 with higher height 33.5mm but same diameter 75mm, FARS75D can be used to measure 6 axis force Fx and Fy are 500N, Fz is 700N, Mx,My and Mz are 18Nm, its weight is 0.36kg.