- Universal 4-20mA & RS485 output, single-turn absolute encoder
- Multiple resolutions are available, such as 12-bit
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Programmable, intelligent absolute value encoder; professional setting software, convenient for user operation
- Wide operating voltage, low current consumption
- External reset wire to set the default location, easy installation, no need to find ZERO.
- Housing IP67, shaft IP65
- Single-turn absolute encoder
- Detection method: magnetoelectric encoder, Hall principle
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Canbus 2.0B standard frame or extended frame
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug
- Resolution: ≤16 bits, up to 65536 lines (order selection)
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67 shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Standard Modbus RTU protocol, single-turn absolute encoder
- Multiple resolutions are available, such as 12-bit, 14-bit, 16-bit, etc.
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Programmable, intelligent absolute value encoder; professional setting software, convenient for user operation
- Wide operating voltage, low current consumption
- External reset wire to set the default location, easy installation, no need to find ZERO.
- Customized RS422 protocol, single-turn absolute encoder
- Multiple resolutions are available, such as 12-bit, 14-bit, 16-bit, etc.
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Programmable, intelligent absolute value encoder; professional setting software, convenient for user operation
- Wide operating voltage, low current consumption
- External reset wire to set the default location, easy installation, no need to find ZERO.
- Customized RS485 protocol, single-turn absolute encoder
- Multiple resolutions are available, such as 12-bit, 14-bit, 16-bit, etc.
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Programmable, intelligent absolute value encoder; professional setting software, convenient for user operation
- Wide operating voltage, low current consumption
- External reset wire to set the default location, easy installation, no need to find ZERO.
- Universal SSI output, single-turn absolute encoder, Can directly match Siemens, German Beckhoff PLC
- Multiple resolutions are available, such as 13-bit, 16bit
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Wide operating voltage, low current consumption
- Housing IP67, shaft IP65
- Single-turn absolute encoder
- Detection method: magnetoelectric encoder, Hall principle
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Parallel output (pure binary, Gray code or Gray remainder)
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug
- Resolution: ≤12 bits, up to 4096 lines (order option)
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67 shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Universal 4-20mA, 0-10V, 0-5V output, Clock-type gear structure multi-turn absolute encoder
- Provides multiple resolutions, such as 12 bit
- 60mm outer diameter, clamping flange, servo flange or blind hollow shaft, international standard structure
- A “magnetic detection mode” with excellent shock and vibration resistance
- Programmable, intelligent absolute value encoder; professional setting software, can set the corresponding measurement value of ZERO and full scale as required.
- Wide operating voltage, low current consumption
- The default position is set by the external reset line, which is easy to install and no change is needed.
- Housing IP67, shaft IP65
- Multi-turn absolute encoder (mechanical gear set circle counting)
- Detection method: magnetoelectric encoder, Hall principle
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Canbus 2.0B standard frame or extended frame
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug
- Resolution: ≤16 bits, up to 65536 lines (order selection)
- Laps: 4096 laps
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67 shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Universal Modbus RTU communication protocol
- Clock-type gear structure multi-turn absolute encoder
- Multiple resolutions are available, such as 12-bit, 14-bit, 16-bit, etc.
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Programmable, intelligent absolute value encoder; professional setting software, convenient for user operation
- Wide operating voltage, low current consumption
- Customized RS485 protocol
- Clock-type gear structure multi-turn absolute encoder
- Multiple resolutions are available, such as 12-bit, 14-bit, 16-bit, etc.
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Programmable, intelligent absolute value encoder; professional setting software, convenient for user operation
- Wide operating voltage, low current consumption
- External reset wire to set the default location, easy installation, no need to find ZERO.
- Universal SSI output, single-turn absolute encoder, Can directly match Siemens, German Beckhoff PLC
- Clock-type gear structure multi-turn absolute encoder
- Multiple resolutions are available, such as 13-bit, 25bit
- 60mm outer diameter, Clamping flange, servo flange or blind hollow shaft, the international standard structure
- A “magnetic detection mode”, with excellent impact and vibration resistance
- Wide operating voltage, low current consumption
- Housing IP67, shaft IP65
- Multi-turn absolute encoder (mechanical gear structure)
- Detection method: magnetoelectric encoder, Hall principle
- Operating voltage: 10…30Vdc polarity protected
- Output signal: Parallel output (pure binary, Gray code or Gray remainder)
- Programmable, intelligent absolute encoder, professional setting software, user-friendly operation
With setting line, easy to install and debug
- Resolution: ≤12 bits, up to 4096 lines (order option)
- Laps: 4096 laps
- Outer diameter 60mm, inner hole/shaft diameter 6-15mm optional
- Protection class: shell IP67, shaft IP65
- Vibration and shock: 20g, 10～2000Hz; 100g, 6ms
- Allowable speed: 6000 rpm
- Software and hardware can be customized according to actual needs
- Measuring range: up to 8000mm
- Output signal: AB phase, ABZ phase
- Resolution: 0.01, 0.02, 0.04, 0.08mm / pulse
- Working voltage: 10-30V DC, 5V DC
- Accuracy: +/-0.05% (full scale), +/-1 pulse
- Measuring wheel circumference: 400mm
- Pulling speed: maximum 1m/s
- Pull rope tension: 5-10N
- Weight: <5KG
- Product Name: Cable Displacement Sensor CESI-L8000 Series
- Can be customized on request
- Measuring range: up to 3000mm
- Measuring wheel circumference: 200mm
- Pulling speed: maximum 0.6m/s
- Pull rope tension: 5N
- Weight: <2KG
- Accuracy: +/-0.05%FS
- Power supply voltage: 10-30V DC, 5V DC
- Resolution 0.01, 0.02, 0.04, 0.08 mm / pulse
- Product Name: Cable Displacement Sensor CESI-M3000 Series
- Can be customized on request
- Measuring range: up to 5000mm
- Measuring wheel circumference: 300mm
- Pulling speed: maximum 1m/s
- Pull rope tension: 5-10N
- Weight: <2KG
- Resolution: 0.01, 0.02, 0.04, 0.08mm / pulse
- Power supply voltage: 10-30V DC, 5V DC
- Accuracy: +/-0.05% (full scale), +/-1 pulse
- Product Name: Cable Displacement Sensor CESI-M5000 Series
- Can be customized on request
No products were found matching your selection.
